Philips 190sw9f User Manual
Have a look at the manual Philips 190sw9f User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 619 Philips manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
![Page 57
4NBSU.BOBHF
Q&A
Q1. What is the difference between SmartManage, SmartControl?
A. SmartManage is a remote management/control software for IT managers to m\
anage monitors across the network
SmartControl is a control panel extension, which helps users to adjust m\
onitor performances and settings by a
software interface, instead of the hardware buttons at the front bezel o\
f the monitors.
Q2. I change the monitor on a PC to a different one and the SmartControl bec\
omes un-usable, what do I do?
A....](http://img.usermanuals.tech/thumb/59/52316/w64_philips_190sw9f-user-manual-56.png "Page 57
4NBSU.BOBHF
Q&A
Q1. What is the difference between SmartManage, SmartControl?
A. SmartManage is a remote management/control software for IT managers to m\
anage monitors across the network
SmartControl is a control panel extension, which helps users to adjust m\
onitor performances and settings by a
software interface, instead of the hardware buttons at the front bezel o\
f the monitors.
Q2. I change the monitor on a PC to a different one and the SmartControl bec\
omes un-usable, what do I do?
A....")
![Page 58
4NBSU.BOBHF
Q6. I forgot my PIN for Theft Deterrence Function. How can I do?
A. Please contact IT manager or Philips Service Center.
Q7. In a monitor with the Smartlmage feature, the sRGB scheme of color temp\
erature function in SmartControl is
not responding, why?
A. When Smartlmage is enabled, the sRGB scheme is disabled automatically. \
To use sRGB, you need to
disable Smartlmage with the
button at the front bezel of your monitor.RETURN TO TOP OF THE PAGE
...](http://img.usermanuals.tech/thumb/59/52316/w64_philips_190sw9f-user-manual-57.png "Page 58
4NBSU.BOBHF
Q6. I forgot my PIN for Theft Deterrence Function. How can I do?
A. Please contact IT manager or Philips Service Center.
Q7. In a monitor with the Smartlmage feature, the sRGB scheme of color temp\
erature function in SmartControl is
not responding, why?
A. When Smartlmage is enabled, the sRGB scheme is disabled automatically. \
To use sRGB, you need to
disable Smartlmage with the
button at the front bezel of your monitor.RETURN TO TOP OF THE PAGE
...")
![Page 60
*OTUBMMJOH:PVS-$%.POJUPS
Rear View
1Kensington anti-thief lock
2 VGA input
3 DVI-D input (available for selective models)
4 AC power input
RETURN TO TOP OF THE PAGE
Optimizing Performance
µFor best performance, ensure that your display settings are set at 1440 \
x 900, 60Hz.
Note: You can check the current display settings by pressing the OK button \
once. The current display mode is shown in OSD main controls called
RESOLUTION.
j¹>](http://img.usermanuals.tech/thumb/59/52316/w64_philips_190sw9f-user-manual-59.png "Page 60
*OTUBMMJOH:PVS-$%.POJUPS
Rear View
1Kensington anti-thief lock
2 VGA input
3 DVI-D input (available for selective models)
4 AC power input
RETURN TO TOP OF THE PAGE
Optimizing Performance
µFor best performance, ensure that your display settings are set at 1440 \
x 900, 60Hz.
Note: You can check the current display settings by pressing the OK button \
once. The current display mode is shown in OSD main controls called
RESOLUTION.
j¹>")
![Page 62
$POOFDUJOHUP:PVS1$
• Front View Product
Description
• Accessory Pack
• Connecting to Your PC
• Getting Started
• Optimizing Performance
• The base
Connecting to Your PC
Accessory Pack
Unpack all the parts.
VGA cable EDFU pack
Power cord DVI cable (Optional)
RETURN TO TOP OF THE PAGE
Connecting to Your PC
1) Connect the power cord to the back of the monitor firmly. (Philips has\
pre-connected
VGA cable for the first installation.
...](http://img.usermanuals.tech/thumb/59/52316/w64_philips_190sw9f-user-manual-61.png "Page 62
$POOFDUJOHUP:PVS1$
• Front View Product
Description
• Accessory Pack
• Connecting to Your PC
• Getting Started
• Optimizing Performance
• The base
Connecting to Your PC
Accessory Pack
Unpack all the parts.
VGA cable EDFU pack
Power cord DVI cable (Optional)
RETURN TO TOP OF THE PAGE
Connecting to Your PC
1) Connect the power cord to the back of the monitor firmly. (Philips has\
pre-connected
VGA cable for the first installation.
...")
![Page 63
$POOFDUJOHUP:PVS1$
* available for selective models
* available for selective models
2) Connect to PC (a)
Turn off your computer and unplug its power cable.
(b)
Connect the monitor signal cable to the video connector on the back of y\
our computer.
(c)
Plug the power cord of your computer and your monitor into a nearby outl\
et.
(d)
Turn on your computer and monitor. If the monitor displays an image, ins\
tallation is complete.
RETURN TO TOP OF THE PAGE
j¹>](http://img.usermanuals.tech/thumb/59/52316/w64_philips_190sw9f-user-manual-62.png "Page 63
$POOFDUJOHUP:PVS1$
* available for selective models
* available for selective models
2) Connect to PC (a)
Turn off your computer and unplug its power cable.
(b)
Connect the monitor signal cable to the video connector on the back of y\
our computer.
(c)
Plug the power cord of your computer and your monitor into a nearby outl\
et.
(d)
Turn on your computer and monitor. If the monitor displays an image, ins\
tallation is complete.
RETURN TO TOP OF THE PAGE
j¹>")
![Page 65
5IF#BTF
:
• Front View Product
Description
• Accessory Pack
• Setting up and connecting
your monitor
• Getting Started
• Optimizing Performance
• Attach the Base
• Detach the Base Stand
• Remove the Base
The Base
Attach and Detach the Base
Attach the Base
1) Place the monitor face down on a smooth surface taking care to avoid sc\
ratching or damaging the
screen.
2) Hold the monitor base with both hands and firmly insert the base stand \
into the base column.
RETURN...](http://img.usermanuals.tech/thumb/59/52316/w64_philips_190sw9f-user-manual-64.png "Page 65
5IF#BTF
:
• Front View Product
Description
• Accessory Pack
• Setting up and connecting
your monitor
• Getting Started
• Optimizing Performance
• Attach the Base
• Detach the Base Stand
• Remove the Base
The Base
Attach and Detach the Base
Attach the Base
1) Place the monitor face down on a smooth surface taking care to avoid sc\
ratching or damaging the
screen.
2) Hold the monitor base with both hands and firmly insert the base stand \
into the base column.
RETURN...")
![Page 66
5IF#BTF
Detach the Base
Place the monitor face on a safe surface, push down on the release butto\
n and pull the base stand away
from the monitor body.
Remove the base
Condition:
For VESA Standard Mounting
1) Place monitor face down on a smooth surface.
j¹>](http://img.usermanuals.tech/thumb/59/52316/w64_philips_190sw9f-user-manual-65.png "Page 66
5IF#BTF
Detach the Base
Place the monitor face on a safe surface, push down on the release butto\
n and pull the base stand away
from the monitor body.
Remove the base
Condition:
For VESA Standard Mounting
1) Place monitor face down on a smooth surface.
j¹>")
*OTUBMMJOH:PVS-$%.POJUPS RETURN TO TOP OF THE PAGE j¹>
$POOFDUJOHUP:PVS1$ • Front View Product Description • Accessory Pack • Connecting to Your PC • Getting Started • Optimizing Performance • The base Connecting to Your PC Accessory Pack Unpack all the parts. VGA cable EDFU pack Power cord DVI cable (Optional) RETURN TO TOP OF THE PAGE Connecting to Your PC 1) Connect the power cord to the back of the monitor firmly. (Philips has\ pre-connected VGA cable for the first installation. j¹>
$POOFDUJOHUP:PVS1$ * available for selective models * available for selective models 2) Connect to PC (a) Turn off your computer and unplug its power cable. (b) Connect the monitor signal cable to the video connector on the back of y\ our computer. (c) Plug the power cord of your computer and your monitor into a nearby outl\ et. (d) Turn on your computer and monitor. If the monitor displays an image, ins\ tallation is complete. RETURN TO TOP OF THE PAGE j¹>
5IF#BTF : • Front View Product Description • Accessory Pack • Setting up and connecting your monitor • Getting Started • Optimizing Performance • Attach the Base • Detach the Base Stand • Remove the Base The Base Attach and Detach the Base Attach the Base 1) Place the monitor face down on a smooth surface taking care to avoid sc\ ratching or damaging the screen. 2) Hold the monitor base with both hands and firmly insert the base stand \ into the base column. RETURN TO TOP OF THE PAGE j¹>
5IF#BTF Detach the Base Place the monitor face on a safe surface, push down on the release butto\ n and pull the base stand away from the monitor body. Remove the base Condition: For VESA Standard Mounting 1) Place monitor face down on a smooth surface. j¹>
5IF#BTF 2) Remove the 4 Screws and then remove the base from the LCD monitor. 3) VESA mounting holes. RETURN TO TOP OF THE PAGE j¹>
(FUUJOH4UBSUFE Your LCD Monitor : • Front View Product Description • Setting Up and Connecting Your Monitor • Getting Started • Optimizing Performance Getting Started Getting Started Use the information file ( .inf) for Windows® 95/98/2000/Me/XP/Vist\ a or later The built-in VESA DDC2B feature in Philips Monitors supports Plug & Play\ requirements for Windows® 95/98/2000/Me/XP/Vista. This information file ( .inf) shou\ ld be installed in order that your Philips monitor can be enabled from the Monitor dialog box in Win\ dows® 95/98/2000/Me/ XP/Vista and the Plug & Play application can be activated. The installat\ ion procedure based on Windows® 95 OEM Release 2 , 98 , 2000 , Me, XP and Vista is specifie\ d as follows. For Windows® 95 Start Windows® 95 Click on the Start button, point to Settings, and then click on Con\ trol Panel. Double click on the Display Icon. Select the Settings tab then click on Advanced.... Select the Monitor button, point to Change... then click on Have Di\ sk.... Click on the Browse... button, select the appropriate drive F: ( CD-R\ OM Drive) then click on the OK button. Click on the OK button then select your monitor model and click on OK\ . Click on the Close button. For Windows® 98 Start Windows® 98 Click on the Start button, point to Settings, and then click on Con\ trol Panel. Double click on the Display Icon. Select the Settings tab then click on Advanced.... Select the Monitor button, point to Change... then click on Next Select Display a list of all the drivers in a specific location, so you\ can choose the driver you want. then click on Next and then click on Have Disk.... Click on the Browse... button, select the appropriate drive F: ( CD-R\ OM Drive) then click on the OK button. Click on the OK button then select your monitor model and click on the\ Next button. Click on the Finish button then the Close button. For Windows® 2000 Start Windows® 2000
(FUUJOH4UBSUFE Click on the Start button, point to Settings, and then click on Con\ trol Panel. Double click on the Display Icon. Select the Settings tab then click on Advanced.... Select Monitor - If the Properties button is inactive, it means your monitor is prope\ rly configured. Please stop installation. - If the Properties button is active. Click on Properties button. Pl\ ease follow the steps given below. Click on Driver and then click on Update Driver... then click on the\ Next button. Select Display a list of the known drivers for this device so that I ca\ n choose a specific driver, then click on Next and then click on Have disk.... Click on the Browse... button then select the appropriate drive F: ( \ CD-ROM Drive). Click on the Open button, then click on the OK button. Select your monitor model and click on the Next button. Click on the Finish button then the Close button. If you can see the Digital Signature Not Found window, click on the Y\ es button. For Windows® Me Start Windows® Me Click on the Start button, point to Settings, and then click on Con\ trol Panel. Double click on the Display Icon. Select the Settings tab then click on Advanced.... Select the Monitor button, then click on Change... button. Select Specify the location of the driver(Advanced) and click on the\ Next button. Select Display a list of all the drivers in a specific location, so you\ can choose the driver you want, then click on Next and then click on Have Disk.... Click on the Browse... button, select the appropriate drive F: ( CD-R\ OM Drive) then click on the OK button. Click on the OK button, select your monitor model and click on the Ne\ xt button. Click on Finish button then the Close button. For Windows® XP Start Windows® XP Click on the Start button and then click on Control Panel. Select and click on the category Printers and Other Hardware Click on the Display Item. Select the Settings tab then click on the Advanced button. Select Monitor tab - If the Properties button is inactive, it means your monitor is prope\ rly configured. Please stop installation. - If the Properties button is active, click on Properties button. Please follow the steps below. Click on the Driver tab and then click on Update Driver... button. Select the Install from a list or specific location [advanced] radio b\ utton and then click on the Next button. Select the Dont Search. I will choose the driver to install radio but\ ton. Then click on the Next button.