Home > Philips > Monitor > Philips 192e2sb User Manual

Philips 192e2sb User Manual

    Download as PDF Print this page Share this page

    Have a look at the manual Philips 192e2sb User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 619 Philips manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    							EN User manual 1
      Customer care and warranty  29
      Troubleshooting & FAQs  41
    192EL2
    192E2
    www.philips.com/welcome
     
    						
    							Table of Contents
    1. Important ......................................................... 1
    1.1  Safety precautions and maintenance ............... 1
    1.2 Notational Descriptions ......................................... 2
    1.3  Disposal of product and packing material.... 3
    2.  Setting up the monitor .................................. 4
    2.1 Installation ....................................................................... 4
    2.2  Operating the monitor ........................................... 5
    2.3  Remove Base Stand and Base ............................. 7
    3. Product information ...................................... 9
    3.1 Smar tImage Lite .......................................................... 9
    3.2 Smar tContrast ............................................................. 10
    3.3  Philips Smar tControl Lite ...................................... 11
    3.4   Philips Flat Panel Monitors Pixel Defect 
    Policy ........................................................................\
    .......... 17
    4 Technical Specifications ................................. 19
    4.1  Resolution & Preset Modes.................................. 22
    4.2 Automatic PowerSaving  .......................................... 22
    5 Regulatory Information ................................. 23
    6  Customer care and warranty ...................... 29
    7  Troubleshooting & FAQs .............................. 41
    7.1 Troubleshooting .......................................................... 41
    7.2  Smar tControl Lite FAQs ........................................ 43
    7.3 General FAQs .............................................................. 44
     
    						
    							1
    This electronic user’s guide is intended for anyone 
    who uses the Philips monitor. Take time to read 
    this user manual before you use your monitor. 
    It contains impor tant information and notes 
    regarding operating your monitor.
    The Philips guarantee applies provided the 
    product is handled properly for its intended use, 
    in accordance with its operating instructions and 
    upon presentation of the original invoice or cash 
    receipt, indicating the date of purchase, dealer’s 
    name and model and production number of the 
    product.
    1.1  Safety precautions and maintenance
     
    Warnings
    Use of controls, adjustments or procedures other 
    than those specif
    ied in this documentation may 
    result in exposure to shock, electrical hazards 
    and/or mechanical hazards.
    Read and follow these instructions when 
    connecting and using your computer monitor.
    Operation  Keep the monitor out of direct sunlight and 
     •
    away from stoves or any other heat source.
     Remove any object that could fall into 
     •
    ventilation holes or prevent proper cooling of 
    the monitor’s electronics.
     Do not block the ventilation holes on the 
     •
    cabinet.
     When positioning the monitor, make sure the 
     •
    power plug and outlet are easily accessible.
     If turning off the monitor by detaching the 
     •
    power cable or DC power cord, wait for 6 
    seconds before attaching the power cable or 
    DC power cord for normal operation.
     Please use approved power cord provided 
     •
    by Philips all the time. If your power cord is 
    missing, please contact with your local ser vice 
    center. (Please refer to Customer Care 
    Consumer Information Center)
    1. Important
     Do not subject the monitor to severe 
     •
    vibration or high impact conditions during 
    operation.
     Do not knock or drop the monitor during 
     •
    operation or transpor tation.
    Maintenance  To protect your monitor from possible 
     •
    damage, do not put excessive pressure on the 
    LCD panel. When moving your monitor, grasp 
    the frame to lift; do not lift the monitor by 
    placing your hand or fingers on the LCD panel.
     Unplug the monitor if you are not going to 
     •
    use it for an extensive period of time.
     Unplug the monitor if you need to clean it 
     •
    with a slightly damp cloth. The screen may be 
    wiped with a dr y cloth when the power is off. 
    However, never use organic solvent, such as, 
    alcohol, or ammonia-based liquids to clean 
    your monitor.
     To avoid the risk of shock or permanent 
     •
    damage to the set, do not expose the monitor 
    to dust, rain, water, or excessive moisture 
    environment.
      If your monitor gets wet, wipe it with dr y cloth 
     •
    as soon as possible.
     If foreign substance or water gets in your 
     •
    monitor, please turn the power off immediately 
    and disconnect the power cord. Then, remove 
    the foreign substance or water, and send it to 
    the maintenance center.
     Do not store or use the monitor in locations 
     •
    exposed to heat, direct sunlight or extreme 
    cold.
     In order to maintain the best performance of 
     •
    your monitor and use it for a longer lifetime, 
    please use the monitor in a location that falls 
    within the following temperature and humidity 
    ranges. 
    o  Temperature: 0-40°C 32-95°Fo  Humidity: 20-80% RH
     
    						
    							2
     
    IMPORTANT: Always activate a moving screen 
     •
    sav
    
    er program when you leave your monitor 
    unattended. Always activate a periodic screen 
    refresh application if your monitor will display 
    unchanging static content. Uninterrupted 
    display of still or static images over an 
    extended period may cause “burn in”, also 
    known as “after-imaging” or “ghost imaging”,  
    on your screen. Burn-in, after-imaging, or 
    ghost imaging is a well-known phenomenon 
    in LCD panel technology. In most cases, 
    the “burned in” or “after-imaging” or “ghost 
    imaging” will disappear gradually over a period 
    of time after the power has been switched off. 
      Warning
    Severe” burn-in” or “after-image” or “ghost image” 
    symptoms will not disappear and cannot be 
    repaired. The damage mentioned above is not 
    covered under your warranty.
    Service
     The casing cover should be opened only by 
     •
    qualified ser vice personnel.
     If there is any need for any document for 
     •
    repair or integration, please contact with 
    your local ser vice center. (please refer to the 
    chapter of Consumer Information Center) 
     For transpor tation information, please refer to 
     •
    Technical Specifications. 
     Do not leave your monitor in a car/trunk 
     •
    under direct sun light.
     Note
    Consult a ser vice technician if the monitor does 
    not operate normally, or you are not sure what 
    procedure to take when the operating instructions 
    given in this manual have been followed.
    1.2 Notational Descriptions
    The following subsections describe notational 
    conventions used in this document. 
    Notes, Cautions and Warnings
    Throughout this guide, blocks of text may be 
    accompanied by an icon and printed in bold or 
    italic type. These blocks contain notes, cautions or 
    warnings. They are used as follows:
      Note
    This icon indicates impor tant information and tips 
    that help you make better use of your computer 
    system.
      Caution
    This icon indicates information that tells you how 
    to avoid either potential damage to hardware or 
    loss of data.
      Warning
    This icon indicates the potential for bodily harm 
    and tells you how to avoid the problem.
    Some warnings may appear in alternate formats 
    and may not be accompanied by an icon. In such 
    cases, the specific presentation of the warning is 
    mandated by the relevant regulator y authority.
     
    						
    							3
    1.3  
    Disposal of pr oduct and packing 
    material
    W
    
    aste Electrical and Electronic Equipment-
    WEEE
    This marking on the product or on its packaging 
    illustrates that, under European Directive 2002/96/
    EC governing used electrical and electronic 
    appliances, this product may not be disposed 
    of with normal household waste. You are 
    responsible for disposal of this equipment through 
    a designated waste electrical and electronic 
    equipment collection. To determine the locations 
    for dropping off such waste electrical and 
    electronic, contact your local government office, 
    the waste disposal organization that ser ves your 
    household or the store at which you purchased 
    the product.
    Your new monitor contains materials that can be 
    recycled and reused. Specialized companies can 
    recycle your product to increase the amount of 
    reusable materials and to minimize the amount to 
    be disposed of. 
    All redundant packing material has been omitted. 
    We have done our utmost to make the packaging 
    easily separable into mono materials.
    Please find out about the local regulations on how 
    to dispose of your old monitor and packing from 
    your sales representative. 
    Recycling Information for Customers
    There is currently a system of recycling up and 
    running in the European countries, such as The 
    Netherlands, Belgium, Norway, Sweden and 
    Denmark.
    In Asia Pacific, Taiwan, the products can be taken 
    back by Environment Protection Administration 
    (EPA) to follow the IT product recycling 
    management process, detail can be found in web 
    site www.epa.gov.tw
    The monitor contains par ts that could cause 
    damage to the nature environment. Therefore, it is 
    vital that the monitor is recycled at the end of its 
    life cycle. 
    For help and ser vice, please contact Consumers 
    Information Center or F1rst Choice Contact 
    Information Center in each countr y. 
     
    						
    							4
    2.1 Installation
     Package contents
    2.  Setting up the monitor
      Install base stand
    1.   Place the monitor face down a smooth surface 
    taking care to avoid scratching or damaging 
    the screen. Then lift the monitor stand. 2.  
    Hold the monitor base stand with both hands 
    and firmly inser t the base stand into the base 
    column.
    Monitor
    Quick start guide
    Base stand EDFU CD
    Power cordVGA signal cable (optional) 
    DVI cable (optional)
    Philips and the Philips’ Shield Emblem are registered trademarks of 
    Koninklijke Philips Electronics N.V. and are used under license from 
    Koninklijke Philips Electronics N.V.
        © 2010 Koninklijke  Philips  Electronics, N.V.All  rights reserved.  Unauthorized  duplication  is a violation  of applicable laws. Made and printed in China.  Version M2225B  5B.0V601.001
    192E2/192EL2CLICK!
     
    						
    							5
     Connecting to your PC
     
      Kensington anti-thief lock
      AC power input
      DVI-D input (available for selecting 
    model)
     VGA input
    Connect to PC 1.   Connect the power cord to the back of 
    the montior fir
    
    mly.
    2.   Turn off your computer and unplug its 
    pow
    
    er cable.
    3.   Connect the monitor signal cable to the 
    video connector on the back of y our 
    computer
    
    .
    4.   Plug the power cord of your computer 
    and y
    our monitor into a nearb
    
    y outlet.
    5.   Turn on your computer and monitor. If 
    the monitor displa
     ys an image, installation 
    is complete.
    2.2  Operating the monitor
      Front view product description
     : To access OSD menu.
     : Return to previous OSD level.
     :  Change to 4:3 display.
     : To switch monitor’s power on and off.
     : To adjust the OSD menu. : To change the signal input.
     :  Smar tImage Lite. There are 3 modes 
    to be selected: Standard, Internet and 
    Game.
     
    						
    							6
     Description of the On Screen Display
    What is On-Screen Display (OSD)?
    On-Screen Display (OSD) is a feature in all Philips 
    LCD monitors. It allows an end user to adjust 
    screen performance or select functions of the 
    monitors directly through an on-screen instruction 
    window. A user friendly on screen display interface 
    is shown as below:
    Basic and simple instruction on the control keys
    In the OSD shown above users can press 
     
    buttons at the front bezel of the monitor to move 
    the cursor,  OK to confirm the choice or change.
    The OSD Menu
    Below is an overall view of the structure of the 
    On-Screen Display. You can use this as a reference 
    when you want to work your way around the 
    different adjustments later on.
    Main menu
    Auto Sub menu
    Input VGA
    DVI (available for selective models)
    Picture
    Wide screen,4:3
    0~100
    0~100
    On, Off
    Picture Format
    Brightness
    Contrast
    SmartContrast
    OSD Setting 0~1000~100
    Off, 1, 2, 3, 4
    5, 10, 20, 30, 60
    Horizontal
    Vertical
    Transparency
    OSD Time out
    Setup
    0~100
    On, Off
    Yes, No
    0~100
    0~100
    0~100
    H. Position
    V. Position
    Phase
    Clock
    Resolution Notification
    Reset
    Information
    LanguageEnglish
    5\Español, Français, Deutsch, Italiano,
    Português,  Русский
    5\ 
    簡体中文,Türkçe 
    Color 6500K, 9300K
    Red: 0~100
    Green: 0~100
    Blue: 0~100
    Color Temp.
    sRGB
    User Define
     
    						
    							72.3  Remove Base Stand and Base
     
    Remove the Base Stand
    Before you star t disassembling the monitor base, 
    please follow the instructions below to avoid 
    damage or injur y.
    1.    Place the monitor face down on a smooth 
    surface, taking care to avoid scratching or 
    damaging the screen. 
     Physical Function
    Tilt
      Resolution notification
    This monitor is designed for optimal performance 
    at its native resolution, 1366x768@60Hz. 
    When the monitor is powered on at a different 
    resolution, an aler t is displayed on screen: Use 
    1366x768@60Hz for best results.
    Display of the native resolution aler t can be 
    switched off from Setup in the OSD (On Screen 
    Display) menu.
    2.   Press the locking clips to detach the base stand 
    away from the base column.
     
    						
    							8
      Remove the Base
    Condition: For VESA standard mounting applications
     •
    1.  Remove the 4 screw covers.
    2.   Remove the 4 screws and then remove the base 
    from the monitor.
     
    100mm
    100mm
      Note
    This monitor accepts a 100mm x 100mm 
    VESA-Compliant mounting interface.
     
    						
    All Philips manuals Comments (0)

    Related Manuals for Philips 192e2sb User Manual