Philips 19pfl3403 User Manual

							21
Summary of US movie ratings
RatingDescription
AllAll	items	in	the	ratings	list	are	
locked.
NR
Not	rated.
GMovies	with	a	mild	content, 	
suitable	for	all	ages.
PGMovies	for	which	parental	
guidance	is	recommended.	They	
may	contain	a	few	racy	or	violent	
scenes	or	maybe	some	bad	
language.
PG	-13Movies	for	which	parental	
guidance	may	be	recommended	if	
under	age	13.
RRestricted. 	The	movies	usually	
contain	offensive	sex	or	bad	
language	and	may	be	unsuitable	
for	children	under	the	age	of	17. 	
Parental	guidance	or	permission	
needed.
NC-17
Even	with	parental	permission, 	
forbidden	under	age	17.	More	
offensive	sex,	violence	or	bad	
language.
X
Movies	which	generally	focus	on	
sex, 	violence	and/or	bad	language. 	
Also	known	as	pornography.
Block unrated or no rating programs
Block	unrated	programs	such	as	 “director’s	cut”	
edition	or	programs	with	no	advisor y	data.
1	 Access	the	[Parental Control]	menu.
2	 Press		to	highlight	[Unrated Block]	or	
[No Rating Block] .
3	 Press	OK.
4	 Press		or		to	select	[On].
5	 Press	MENU/BACK	to	return	to	the	
previous	menu,	or	press	STATUS/EXIT	to	
exit.
1	 Access	the	[Parental Control]	menu.
2	 Press		and	select	[Movie Rating].
3	 Press	OK.
4	 Press		to	highlight	a	rating	and	press		
or		to	change	the	setting	to	[View]	or	
[Block].
  
When	you	block	a	movie	rating, 	all	items	
for	ages	below	that	movie	rating	are	
automatically	blocked.
5	 Press	MENU/BACK	to	return	to	the	
previous	menu,	or	press	STATUS/EXIT	to	
exit.
Movie Rating
N/R
G
PG
PG-13
R
NC-17
X
Picture
 Sound  Features  Install
View
Block
View
View
View
View
View
: SELMENU: ADJ: EXIT
Movie Rating
N/R
G
PG
PG-13
R
NC-17
X
Picture
 Sound  Features  Install
View
Block
View
View
View
View
View
: SELMENU: ADJ: EXIT
E n g l i s h
EN
 
						

							22
Unlock blocked channels or programs
To	view	programs	or	channels	blocked	with	the	
parental	control	blocking	options,	unlock	them	
with	the	password	or	turn	off	parental	control.
Turn off parental control
1	 Access	the	[Parental Control]	menu.
2	 Press		to	highlight	[Parental Control]	
and	press		or		to	turn	off	[Parental 
Control].
  
3	 Press	MENU/BACK	to	return	to	the	
previous	menu, 	or	press	STATUS/EXIT	to	
exit.
Parental Control
Change Password
Parental Control
TV Rating
Movie Rating
Unrated BlockNo Rating Block   
Picture
 Sound  Features  Install
>
Off
>
>OnOn
: SELMENU: ADJ: EXIT
Parental Control
Change Password
Parental Control
TV Rating
Movie Rating
Unrated BlockNo Rating Block   
Picture
 Sound  Features  Install
>
Off
>
>OnOn
: SELMENU: ADJ: EXIT
EN
 
						

							23
If	necessar y,	adjust	the	picture	position	to	the	
center	of	the	screen	with	the	cursor	buttons.
Adjust display settings for PC 
mode
Adjust	your	 TV	display	settings	in	PC	mode.
1	 Press	MENU/BACK	and	select	[Features]	
>	[Geometry].
2	 Press	OK.
  
3	 Press		or		to	select	an	item.
4	 Press		or		to	adjust	the	setting.
5	 Press	MENU/BACK	to	return	to	the	
previous	menu, 	or	press	STATUS/EXIT	to	
exit.
You can configure the following display settings 
for	PC	mode:
[Auto Adjust]: 	Synchronizes	the	phase	and	
clock	on	the	 TV	and	PC .
[Horizontal Shift]	and	[Vertical Shift]:	
Adjusts	the	horizontal	and	ver tical	position	
of	the	picture.
[Clock]	and	[Phase]:	Fine-tunes	the	 TV	to	
match	the	display	settings	of	the	PC .
•
•
•
Geometr y
Auto Adjust
Horizontal Shift
Vertical Shift
Clock
Phase +50
+50
100
100
Picture
 Sound  Features  Install
: SELMENU: ADJ: EXIT
Geometr y
Auto Adjust
Horizontal Shift
Vertical Shift
Clock
Phase +50
+50
100
100
Picture
 Sound  Features  Install
: SELMENU: ADJ: EXIT
7 Use your TV as 
a PC monitor
For	information	about	how	to	connect	a	PC	to	
the	 TV,	see	the	Quick	Star t.
Caution
Before	you	connect	your	PC, 	set	the	PC	monitor	refresh rate to 60Hz.•
Configure your TV in PC 
mode
1
	 Press	SOURCE	and	select	PC,	then	press	
OK.
Tip
Toggle	TV/PC	to	switch	to	PC	and	the	last	accessed	mode.•
Note
Cer tain	picture	and	sound	features	are	not	available	in	PC	mode.•
Supported screen resolutions
The	following	screen	resolutions	are	suppor ted	
in	PC	mode:
ResolutionRefresh	rate
640	x	48060Hz
800	x	60060Hz
1024	x	76860Hz
1280	x	76860Hz
1280	x	102460Hz
E n g l i s h
EN
 
						

							24
Note
Cer tain	picture	and	sound	features	are	not	available	in	HDMI	and	YCbCr	modes.•
Supported screen resolutions
The	following	screen	resolutions	are	suppor ted	
in	HDMI	and	YPbPr	modes:
ResolutionRefresh	rate
480i60Hz
480p 60Hz
576i 50Hz
576p 50Hz
720p 50Hz
720p 60Hz
1080i 50Hz
1080i 60Hz
If	necessar y,	adjust	the	picture	position	to	the	
center	of	the	screen	with	the	cursor	buttons.
Adjust display settings in HD 
mode
Adjust your TV display settings in HD mode.
1	 Press	MENU/BACK	and	select	[Features]	
>	[Geometry].
2	 Press	OK.
  
3	 Press		or		to	select	an	item.
Geometr y
Horizontal Shift
Vertical Shift +50
+50
Picture
 Sound  Features  Install
: SELMENU: ADJ: EXIT
Geometr y
Horizontal Shift
Vertical Shift +50
+50
Picture
 Sound  Features  Install
: SELMENU: ADJ: EXIT
8 Use your TV in 
HDTV mode
Not all models can be configured in high 
definition (HD) mode. For information about 
your set, see the specification.
When you connect an HD device to your TV, 
configure the display format of your TV. You 
might also have to configure the display format 
of your HD device. For information about 
configuring your device, see the documentation 
of	the	device. 	
Configure your TV in HD 
mode
1
 Connect your HD device to the TV. Refer 
to	the	Quick	Star t.
2	 Press	SOURCE	and	select	HDMI	or	
YPBPR,	then	press	OK.
3	 Press	MENU/BACK	and	select	[Features]	
>	[Mode Selection] .
4	 Press	OK.
5	 Press		or		to	select	a	mode.
  
6	 Press	MENU/BACK	to	return	to	the	
previous	menu,	or	press	STATUS/EXIT	to	
exit.
Ch. Setup
Format
Timer
Closed Caption
Parental Control
Back Light
Contrast +
Geometr y
Mode Selection 5
Picture
 Sound  Features  Install
Widescreen
>
>
>
Off
>
HDMI
: SELMENU: ADJ: EXIT
Ch. Setup
Format
Timer
Closed Caption
Parental Control
Back Light
Contrast +
Geometr y
Mode Selection 5
Picture
 Sound  Features  Install
Widescreen
>
>
>
Off
>
HDMI
: SELMENU: ADJ: EXIT
EN
 
						

							25
4	 Press		or		to	adjust	the	setting.
5	 Press	MENU/BACK	to	return	to	the	
previous	menu,	or	press	STATUS/EXIT	to	
exit.
The following display settings can be configured 
when an HD device is connected to the TV. [Horizontal Shift]
	and	[Vertical Shift]:	
Adjusts	the	horizontal	and	ver tical	position	
of	the	picture.
•
E n g l i s h
EN
 
						

							26
  
3	 Press		and	select	[System].
4	 Press		or		and	select	[AUTO],	[PAL M],	
[PAL N]	or	[NTSC].
  
5	 Press		to	highlight	[Auto Program]	and	
press	OK.
The	 TV	detects	the	[Antenna]	or	
[Cable]	signal	that	you	have	selected	
and	search	for	all	the	available	
channels.
When	the	search	completes, 	the	TV	
switches to the first channel found.
6	 Press	MENU/BACK	to	return	to	the	
previous	menu, 	or	press	STATUS/EXIT	to	
exit.
Fine tune channels
You can manually fine tune channels when the 
reception	is	poor.
1	 Press	CH + / -	or	use	the	number	keys	to	
select the channel to fine tune. •
•
Ch. Setup
Tuner Mode
System
Auto Program
Fine Tune
Picture
 Sound  Features  Install
Antenna
Auto
>
193.25Mhz
: SELMENU: ADJ: EXIT
Ch. Setup
Tuner Mode
System
Auto Program
Fine Tune
Picture
 Sound  Features  Install
Antenna
Auto
>
193.25Mhz
: SELMENU: ADJ: EXIT
Ch. Setup
Tuner Mode
System
Auto Program
Fine Tune
Picture
 Sound  Features  Install
Antenna
NTSC
>
195.30Mhz
: SELMENU: ADJ: EXIT
Ch. Setup
Tuner Mode
System
Auto Program
Fine Tune
Picture
 Sound  Features  Install
Antenna
NTSC
>
195.30Mhz
: SELMENU: ADJ: EXIT
9  Install channels
The first time you setup your TV, you are 
prompted	to	select	a	menu	language	and	to	
install	 TV	and	digital	radio	channels	(if	available). 	
This	chapter	provides	instructions	on	how	to	
reinstall and fine-tune channels.
Select your language
a Press MENU/BACK and select [Install] > 
[Language].
  
b Press  or  to select a language, then 
press OK.
c
  Press MENU/BACK to return to the 
previous menu, or press STATUS/EXIT to 
exit.
Automatically install channels
This	section	describes	how	to	search	and	store	
channels	automatically. 	Instructions	are	for	both	
digital	and	analogue	channels.
1	 Press	MENU/BACK	and	select	[Install]	>	
[Ch. Setup]	>	[Tuner Mode].
2	 Press		or		and	select	[Antenna]	or	
[Cable].
Ch. Setup
Language
Ch. Setup
List
Fav. Channel
Picture
 Sound  Features  Install
English
>
>
>
: SELMENU: ADJ: EXIT
Ch. Setup
Language
Ch. Setup
List
Fav. Channel
Picture
 Sound  Features  Install
English
>
>
>
: SELMENU: ADJ: EXIT
EN
 
						

							27
  
5	 Press	MENU/BACK	to	return	to	the	
previous	menu,	or	press	STATUS/EXIT	to	
exit.
List
Current Channel
In List
Picture
 Sound  Features  Install
30
Off
: SELMENU: ADJ: EXIT
List
Current Channel
In List
Picture
 Sound  Features  Install
30
Off
: SELMENU: ADJ: EXIT
2	 Press	MENU/BACK	and	select	[Install]	>	
[Ch. Setup]	>	[Fine Tune].
3	 Press		or		to	adjust	the	frequency	
setting.
  
4	 Press	MENU/BACK	to	return	to	the	
previous	menu, 	or	press	STATUS/EXIT	to	
exit.
Exclude channels from a list
You	can	exclude	a	channel	from	your	list	of	
channels.	Excluded	channels	are	not	accessed	
when	you	press	CH + / -	on	the	remote	
control	or	CHANNEL + / -	on	the	side	of	
the	TV.	Excluded	channels	can	be	accessed, 	
however,	by	pressing	the	number	keys	on	the	
remote	control. 	It	can	be	useful	to	exclude	
channels	with	weak	signals.
1	 Press	MENU/BACK	and	select	[Install]	>	
[List].
2	 Press	OK.
3	 Press		or		to	select	a	channel	number.
4	 Press		to	highlight	[In List],	and	press		
or		to	select	[Off].
Ch. Setup
Tuner Mode
System
Auto Program
Fine Tune
Picture
 Sound  Features  Install
Antenna
Auto
>
195.30Mhz
: SELMENU: ADJ: EXIT
Ch. Setup
Tuner Mode
System
Auto Program
Fine Tune
Picture
 Sound  Features  Install
Antenna
Auto
>
195.30Mhz
: SELMENU: ADJ: EXIT
E n g l i s h
EN
 
						

							28
Check	the	connections.
Set the PC refresh rate to 60Hz.
Snowy dots and interference
If	the	antenna	is	located	in	the	fringe	area	of	a	
television	signal	where	the	signal	is	weak,	the	
picture	may	appear	snowy.	When	the	signal	is	
weak, 	it	may	be	necessar y	to	install	a	special	
antenna	to	improve	the	reception.
Adjust	the	position	and	orientation	of	
the	indoor/outdoor	antenna.
Check	the	connection	of	antenna.
Fine	tune	the	program.
Tr y	another	program. 	Broadcasting	
failure	may	happen.
Ghost
“Ghosting”	occurs	when	the	television	signal	
follows	two	paths. 	One	is	the	direct	path, 	
the other is reflected from tall buildings, hills, 
or	other	objects.	Changing	the	direction	or	
position	of	the	antenna	may	improve	the	
reception.
Radio frequency interference
This	interference	produces	moving	ripples	
or	diagonal	streaks, 	and	in	some	case,	loss	of	
contrast	in	the	picture. 	Find	out	and	remove	the	
radio	interference	source.
•
•
•
•
10 Troubleshooting
This	section	describes	commonly-encountered	
issues	and	accompanying	solutions.
Some	problems	you	encounter	with	your	 TV	
can	be	corrected	by	consulting	the	following	list:
No picture, no sound
1	 Check	if	the	fuse	or	circuit	breaker	works.
2	 Plug	another	electrical	device	into	the	
outlet	to	make	sure	it	works	or	is	turned	
on.
3	 Power	plug	is	in	a	bad	contact	with	the	
outlet.
4	 Check	the	signal	source.
No color
1	 Change	the	color	system.
2	 Adjust	the	saturation.
3	 Tr y	another	program.	Black-white	program	
may	be	received.
Remote control does not work
1	 Change	the	batteries.
2	 Batteries	are	not	installed	correctly.
3	 Main	power	is	not	connected.
No picture, normal sound
1	 Adjust	the	brightness	and	contrast.
2	 Broadcasting	failure	may	happen.
Normal picture, no sound
1	 Press	the	VOLUME	+	button	to	increase	
volume.
2	 Volume	is	set	to	mute, 	press	MUTE	to	
restore	sound.
3	 Change	the	sound	system.
4	 Broadcasting	failure	may	happen.
Ripples on the picture
Usually	caused	by	local	interference	such	as	
cars,	daylight	lamps	and	hair	driers. 	Adjust	the	
antenna	to	minimize	the	interference.
Blank screen in VGA(PC) mode
Perhaps	the	 TV	can	not	recognize	the	resolution	
set	by	the	PC . 	Change	to	the	best	resolution	or	
other	standard	resolutions	of	the	PC	system.
EN
 
						

							29
Connections (Rear)
AV	1:	Composite	video	(CVBS	in), 	Audio	
L/R	in
YPBPR: 	Component	video	(CVI	in), 	Audio	
L/R	in
PC: 	VGA	in, 	VGA	 Audio	in
HDMI: 1x
TV:	TV	 ANTENNA
Connections (Side)
Headphone out (stereo mini-jack)
AV1: Composite video (CVBS) in, AUDIO 
L/R	in
SVIDEO: 1x S-Video in
Power
Mains	power : 	AC	100-240V	(±10%)
Power	power	consumption: 	50	W	
(19PFL3403), 	80	W	(26PFL3403)
Standby	power	consumption: 	<	0.3	W
Specifications are subject to change 
without notice. For detailed specifications 
of	this	product	go	to	www.philips.com/
suppor t.
Weight
TV	weight: 	4.2	kg	(19PFL3403), 	7.7	kg	
(26PFL3403)
TV	weight	with	stand: 	4.9	kg	(19PFL3403),	
9.1	kg	(26PFL3403)
Dimensions
TV	dimensions:	
Height: 35.3 cm (19PFL3403), 45.8 cm 
(26PFL3403)
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
11 Product 
information
Note
Product	information	is	subject	to	change	without	prior	notice.•
Supported display resolutions
Computer	formats	(see	 ‘Suppor ted	screen	
resolutions’ 	on	page	23)
Video	formats	(see	‘Suppor ted	screen	
resolutions’ 	on	page	24)
Tuner/Reception/
Transmission
Antenna	input: 	75ohm	coaxial	(IEC75)
TV	system:	
Video	playback: 	NTSC,	PAL
Sound
Sound	system:
Mono/Stereo/SAP
Power	output:
2	x	3W	(19PFL3403)	
2	x	5W	(26PFL3403)
Remote control
Type:	PF05L08B
Batteries: 	2	x	AAA	size	(LR03	type)
•
•
•
•
•
•
•
• •
•
•
•
E n g l i s h
EN
 
						

							30
Width:	47.3	cm	(19PFL3403), 	67.1	cm	
(26PFL3403)
Depth: 6.9 cm (19PFL3403), 9.0 cm 
(26PFL3403)
TV	dimensions	with	stand: 	
Height: 39.4 cm (19PFL3403), 50.3 cm 
(26PFL3403)
Width:	47.3	cm	(19PFL3403), 	67.1	cm	
(26PFL3403)
Depth: 16.0 cm (19PFL3403), 21.5 cm 
(26PFL3403)
This	information	is	correct	at	the	time	of	press. 	
For	updated	contact	information,	refer	to	www.
philips.com/suppor t.•
•
• •
•
•
EN