Philips 19pfl3404d User Manual

19
Change the time zone
1 Press  MENU.
2 Press  to select [Setup] > 
[Installation] > [Clock] > [Time zone].
3 Press  to select your time zone.
4 Press OK to confirm.
Note
This option is only available if you select   •[Auto 
clock] > [Manual] (In countries with clock 
transmission data).
Use daylight saving
1 Press  MENU.
2 Press  to select [Setup] > 
[Installation] > [Clock] > [Daylight 
saving].
3 Press OK or  to enter [Daylight saving].
4 Press  to select [Standard time] or 
[Daylight saving time].
5...

20
2 Press:
• OK to pause the slide show.
The   »
 icon appears.
Press  • 
 to go back or move 
for ward to the nex t image.
• 
 BACK to stop the slide show. 
Change slide show settings
1  When viewing a slide show, press  
OPTIONS.
The slide show options menu appears.   »
2 Press  to select one of the following.
• [Start/Stop slide.]Star ts or stops a 
slide show.
• [Slideshow trans.]Sets the transition 
from one picture to the nex t.
• [Slideshow freq.]Sets the amount of 
time that a picture is shown....

21
Update the TV software
Philips continuously tries to improve its 
products and we recommend that you update 
the TV software when updates are available. 
Check www.philips.com/suppor t for availability.
Check the current software version
1 Press  MENU. 
2 Press  to select [Setup] > 
[Software update] > [Current software].
The TV displays the current software    »
information.
Update software (digital broadcasts)
You can update the T V sof tware via a USB 
device or OAD.
Update using a USB device...

22
Access decoder channel
You can map channels provided through a 
decoder or descrambler to your TV channel 
selection. In this way, you can select these 
channels by using the RC of your TV. The 
decoder or a descrambler must be connected 
to EXT1 (SCART). 
Set decoder channel
Map channels from a decoder or descrambler
1 Press  MENU.
2 Press  to select [Setup] > 
[Installation] > [Preferences] > 
[Decoder].
3 Press OK or  to enter [Decoder] menu 
.
4 Press  to select [Channel] and press 
OK or 
 to...

23
Reset the TV to factory 
settings
You can restore the default picture and sound 
settings of your TV. Channel installation settings 
remain the same.
1 Press  MENU.
2 Press  to select [Setup] > 
[Installation] > [Factory settings].
3 Press OK or  to enter the [Factory 
settings] menu.
A factor y setting message appears.   »
4 Select [Reset] to star t resetting.
5 Press  MENU to exit.
English
EN
Downloaded From T,-Manual.com Manuals 

24
  
3 Press OK or  to enter the menu.
The countr y menu appears.   »
  
4 Press  to select your countr y.
5 Press OK to confirm your choice.
The channel installation guide appears    »
on the screen.
Step 3 Install channels
Install the available analogue and digital 
T V channels and digital radio channels 
automatically.
1  From the channel installation guide 
screen (see ‘Step 2 Select your countr y’ 
on page 24), select [Full installation] to 
automatically install all T V channels and 
digital radio...

25
  
3 Press OK or  to enter [System] menu.
4 Press  to select your countr y or 
region.
5 Press OK to confirm.
6 Press  to return to [Channel install.] 
menu.
Step 2 Search and store new TV 
channels
1 Press  MENU.
2 Press  to select [Setup] > 
[Installation] > [Channel install.] > 
[Analogue: Manual].
The    »[Analogue: Manual] menu appears.
3 Press  to select [Search] and then OK 
or 
 to enter [Search].
4 Press  to manually enter the three-
digit frequency.
5 Press OK to begin search.
If a channel is...

26
Reorder channels
After you install channels, you can rearrange the 
order in which they appear.
1  When watching T V, press OK to display 
the channel grid .
2 Press  OPTIONS.
The channel options menu appears.   »
3 Press  to select [Reorder] and then 
OK to return to the channel grid.
4 Press  to select the channel you 
want to reorder and press OK.
The selected channel is highlighted.   »
5 Press  to move the highlighted 
channel to your preferred position.
6 Press  OPTIONS.
  »[Done reordering]...

27
a  PC IN (VGA and AUDIO IN)
Audio and video input from a computer.
 
b  EXT 2 (Y Pb Pr and AUDIO L/R)
Analogue audio and video input from 
analogue or digital devices such as DVD 
players or game consoles.
 
VGA
VGA
PC IN(AUDIO)
 
7 Connect devices
This section describes how to connect 
various devices with different connectors and 
supplements examples provided in the Quick 
Star t.
Note
Different types of connectors may be used to   •
connect a device to your TV, depending on 
availability and your...

28
 
f SPDIF OUT
Digital audio output to home theatres 
and other digital audio systems.
  
g HDMI 1
Digital audio and video input from high-
definition digital devices such as Blu-ray 
players.
  
Connections via DVI or VGA require an 
additional audio cable (see ‘Connect a 
computer’ on page 31).
h SERV. U
For sof tware update.
AUDIOIN
SPDIF OUT
c  EXT 1 (CVBS and RGB)
Analogue audio and video input from 
analogue or digital devices such as DVD 
players or game consoles.
 
d TV ANTENNA
Signal input from...