Philips 19pfl3405 User Manual

							29
Remote control
Ty p e :  P F 0 2 E 0 9 B • 
Batteries: 2 x A A A (LR03 type) • 
Power
Mains power: 220 -240V, 50Hz • 
Standby power: < 0.3 W • 
Ambient temperature: 5 to 40 degrees  • 
Celsius
Supported TV  mounts
To mount the TV, purchase a Philips TV mount. 
To prevent damage to cables and connectors, 
be sure to leave a clearance of at least 2.2 
inches or 5.5cm from the back of the TV.
Warning
Follow all instructions provided with the T V   •
mount. Koninklijke Philips Electronics N.V. 
bears no responsibility for improper TV 
mounting that results in accident, injury or 
damage.
TV screen 
size (inches)Required 
pitch (mm)Required 
mounting bolts 
(≤ 10mm)
19 75 x 75 4 x M4
22 75 x 75 4 x M4
26 75 x 75 4 x M4
8 Product 
information
Product information is subject to change 
without notice. For detailed product 
information, go to www.philips.com/suppor t.
Supported display resolutions
Computer formats
Resolution - refresh rate: • 
640 x 480 - 60Hz • 
800 x 600 - 60Hz • 
1024 x 768 - 60Hz • 
1280 x 768 - 60Hz • 
1360 x 768 - 60Hz • 
Video formats
Resolution - refresh rate: • 
480i - 60Hz • 
480p - 60Hz • 
576i - 50Hz • 
576p - 50Hz • 
720p - 50Hz, 60Hz • 
1080i - 50Hz, 60Hz • 
1080p - 24Hz, 25Hz, 30Hz, 50Hz,  • 
60Hz.
Tuner / Reception / 
Transmission
Aerial input: 75ohm coaxial (IEC75) • 
T V system: PAL I, B/G, D/K; SECAM B/G,  • 
D/K , L /L’ 
Video playback: NTSC , SECAM, PAL • 
Tuner Bands: Hyperband, S-channel, UHF,  • 
VHF
English
EN
 
						

							30
Product specification
Design and specifications are subject to change 
without notice.
  
19PFL3405
Without T V stand • 
Dimension ( WxHxD): 455 x 303.7 x  • 
56 (mm)
Weight: 3.16 kg • 
With T V stand • 
Dimension ( WxHxD): 455 x 328.7 x  • 
13 7. 9  (m m)
Weight: 3.32 kg • 
22PFL3405
Without T V stand • 
Dimension (WxHxD): 526.02 x  • 
343. 5 x 55.79 (mm)
Weight: 4.0 kg • 
With T V stand • 
Dimension (WxHxD): 526.02 x  • 
369.5 x 148.96 (mm)
Weight: 4.2 kg • 
26PFL3405
Without T V stand • 
Dimension ( WxHxD): 637.4 x 410.8  • 
x 63 (mm)
Weight: 5.21 kg • 
With T V stand • 
Dimension ( WxHxD): 637.4 x  • 
447.25 x 170 (mm)
Weight: 5.5 kg • 
EN
 
						

							31
TV channel issues
Previously installed channels do not appear in 
the channel list:
Check that the correct channel list is    •
selected.
Some channels are not automatically installed 
on my TV:
During installation, make sure that    •
you select the countr y where you are 
installing the T V (see ‘Step 2 Select your 
countr y’ on page 21).
Picture issues
The TV is on, but there is no picture:
Check that the antenna is properly    •
connected to the T V.
Check that the correct device is selected    •
as the T V source.
There is sound but no picture:
Check that the picture settings are    •
correctly set.
There is poor TV reception from an antenna 
connection:
Check that the antenna is properly    •
connected to the T V.
Loudspeakers, unear thed audio devices,    •
neon lights, high buildings and other large 
objects can influence reception quality. 
If possible, tr y to improve the reception 
quality by changing the antenna direction 
or moving devices away from the T V.
If reception on only one channel is poor,    •
fine tune this channel.
There is poor picture quality from connected 
devices:
Check that the devices are connected    •
properly.
Check that the picture settings are    •
correctly set. 
The TV did not save your picture settings:
Check that the TV location is set to the  • 
home setting. This mode offers you the 
flexibility to change and save settings.
9 Troubleshooting
This section describes commonly encountered 
issues and accompanying solutions.
General TV  issues
The TV does not switch on:
Disconnect the power cable from the    •
power outlet. Wait for one minute then 
reconnect it.
Check that the power cable is securely    •
connected.
The remote control is not working properly:
Check that the remote control batteries    •
are correctly inser ted according to the 
+/- orientation.
Replace the remote control batteries if    •
they are flat or weak.
Clean the remote control and T V sensor    •
lens.
The standby light on the TV blinks red:
Disconnect the power cable from the    •
power outlet. Wait until the T V cools 
down before reconnecting the power 
cable. If the blinking reoccurs, contact 
Philips Consumer Care. 
You forgot the code to unlock the TV lock 
feature
Enter ‘8888’.   •
The TV menu is in the wrong language.
Change the T V menu to your preferred    •
language.
When turning the TV on / off / to standby, you 
hear a creaking sound from the TV chassis:
No action is required. The creaking sound    •
is normal expansion and contraction of 
the T V as it cools down and warms up. 
This does not impact per formance.
English
EN
 
						

							32
If you use an HDMI-to-DVI adapter    •
or HDMI-to-DVI cable, check that an 
additional audio cable is connected to 
AUDIO (mini-jack only).
Computer connection issues
The computer display on the TV is not stable:
Check that your PC uses the suppor ted    •
resolution and refresh rate.
Set the TV picture format to unscaled.   •
Contact us
If you cannot resolve your problem, refer to the 
FAQs for this T V at w w w.philips.com/suppor t. 
  
If the problem remains unresolved, contact 
Philips Consumer Care in your countr y as 
listed in this user manual.
Warning
Do not at tempt to repair the T V yourself. This   •
may cause severe injur y, irreparable damage to 
your T V or void your warranty.
Note
Make a note of your T V model and serial   •
number before you contact Philips. These 
numbers are printed on the back of the T V 
and on the packaging.
The picture does not fit the screen; it is too 
big or too small:
Tr y using a different picture format.   •
The picture position is incorrect:
Picture signals from some devices may    •
not fit the screen correctly. Check the 
signal output of the device.
Sound issues
There is a picture but sound quality is poor:
Note
If no audio signal is detected, the T V   •
automatically switches the audio output off 
— this does not indicate malfunction.
Check that all cables are properly    •
connected.
Check that the volume is not set to 0.   •
Check that the sound is not muted.   •
There is a picture but the sound quality is 
poor:
Check that the sound settings are    •
correctly set.
There is a picture but sound comes from one 
speaker only:
Verify that sound balance is set to the    •
centre.
HDMI connection issues
There are problems with HDMI devices:
Note that HDCP (High-bandwidth Digital    •
Content Protection) suppor t can delay 
the time taken for a T V to display content 
from a HDMI device. 
If the T V does not recognise the HDMI    •
device and no picture is displayed, tr y 
switching the source from one device to 
another and back again.
If there are intermittent sound    •
disruptions, check that output settings 
from the HDMI device are correct.
EN
 
						

							33
10 Index
A
analogue 
fine-tune 22
antenna 24
B
batteries 29, 5
bracket for wall mount 29
C
care 5
channel grid 10
channels 
favourites list  16
fine-tune 22
grid 10
install 
automatic 21
manual 21
list 16
lock 18
rename 23
reorder / rearrange  23
skip channels  22
switch 10
troubleshooting 31
tune 22
child lock 
lock channels  19
lock connected devices  18
PIN code  18
computer 
connect 32, 27
display resolution  29
connect 
antenna 24
PC 32, 27
connectors 
HDMI 32, 24
over view 24
country 21
D
default settings 20
devices 11
devices 
add to home menu  12
connect 24
watch 11
digital services 
teletex t 11, 15
disconnect USB 20
display 
resolution 29
dispose 5
E
EasyLink 
disable 28
enable 28
one-touch play  28
one-touch standby  28
end of life 5
environmental care 5
e-sticker 20
F
factory settings 20
favourites list 
create list  16
view list  16
fine-tune channels 22
H
HDMI 32
home mode 20
I
install channels 
automatic 21
manual 21
K
Kensington lock 28
English
EN
 
						

							34
R
rearrange channels 23
reception 31
recycle 5
register product 7
remote control 
batteries 29, 5
over view 8
technical specifications  29
rename channels 23
reorder channels 23
resolution 29
restore default 20
S
safety 4
screen care 5
settings 
picture 13
sound 15
shop mode 20
skip channels 22
smart picture 12
smart settings 12 , 14
smart sound 14
software 
version 19
sound settings 15
specifications 29
standby 10
subpages in teletext 15
switch 
channels 10
on and off  10
source 11
L
language 
troubleshoot 31
list 
favourites list  16
location 
countr y 21
home or shop  20
lock 
Kensing ton lock  28
lock channels  19
lock connected devices  18
PIN code  18
M
menu 
main menu  12
teletex t 15
MHEG teletext 11
MPEG artifact reduction 13
O
on timer 17
one-touch play 28
one-touch standby 28
P
PC 
connect 27, 32
resolution 29
picture format 
change 14
troubleshooting 31
picture settings 12
PIN code 18
pixel plus link 20
power 29
power consumption 29
preferences 20
product specifications 29
EN
 
						

							© 2010 Koninklijke Philips Electronics N.V.
All rights reserved.