Philips 19pfl5404 User Manual

							19
Update the TV software
Philips continuously tries to improve its 
products and we recommend that you update 
the TV software when updates are available. 
Check www.philips.com/suppor t for availability.
Check the current software version
1 Press  (Home). 
2 Press  to select [Setup] > 
[Software update] > [Current software].
The TV displays the current software    »
information.
Change TV  preferences
1 Press  (Home).
2 Select [Setup] > [Installation] > 
[Preferences].
3 Press OK or to enter [Preferences].
• [Location]Optimises TV settings for 
your location - home or shop.
• [Volume bar]Displays the volume 
bar when adjusting the volume.
• [EasyLink]Enables one-touch play 
and one-touch standby between 
EasyLink-compliant devices. 
• [Pixel Plus Link]Overrides the 
settings of connected devices and 
uses the settings of the TV. (Available 
only when [EasyLink] > [On] is 
selected).
• [E-sticker]For shop mode only. Sets 
the location of the e-sticker.
4 Press  to select your preference.
5 Press OK.
6 Press  (Home) to exit.
• [Show info]Displays the picture 
name, date, size and nex t picture in 
the slide show.
3 Press OK to confirm your setting.
Note
  •[Rotate image] and [Show info] appear only 
when you press OK or  to pause the 
slideshow.
Listen to music
1  In the USB thumbnail browser view, 
select [MUSIC] and press 
 to enter.
2 Press  GUIDE to switch between 
thumbnail and file browsing views.
3 Press  to select music or a music 
album.
4 Press OK to play the selected music.
Music settings
When listening to music, press  OPTIONS 
to access one of the following music settings.
• [Repeat]
• [Play once]
• [Repeat]
• [Shuffle]
• [Show info]
Disconnect a USB storage device
Caution
Follow this procedure to avoid damage to your   •USB storage device.
1 Press  BACK to exit the USB browser.
2  Wait for five seconds before you 
disconnect the USB storage device.
English
EN
Downloaded From TУ-Manual.com Manuals 
						

							20
Reset the TV to factory 
settings
You can restore the default picture and sound 
settings of your TV. Channel installation settings 
remain the same.
1 Press  (Home).
2 Select [Setup] > [Installation] > [Factory 
settings].
3 Press OK or  to enter the [Factory 
settings] menu.
  »[Reset] is highlighted.
4 Press OK to reset to factor y settings.
5 Press  (Home) to exit.
Access decoder channel
You can map channels provided through a 
decoder or descrambler to your TV channel 
selection. In this way, you can select these 
channels by using the RC of your TV. The 
decoder or a descrambler must be connected 
to EXT1. 
Set decoder channel
Map channels from a decoder or descrambler
1 Press  (Home).
2 Select [Setup] > [Installation] > 
[Decoder].
3 Press  to enter [Decoder].
4 Press  to enter [Channel].
5 Press  to select channel number to 
map to the decoder/descrambler channel.
6 Press OK.
7 Press  to select and enter [Status].
8 Press  to select the connector used 
by the decoder/descrambler ([None] or 
[EXT 1]).
9 Press OK.
10 Press  (Home) to exit.
Note
Select   •[None] if you do not want to map to 
the decoder/descrambler channel.
Start a TV demo
1 Press DEMO on the remote control.
2 Press  to select a demo and press OK 
to view it.
3 Press DEMO to exit.
EN
Downloaded From TУ-Manual.com Manuals 
						

							21
Step 2 Install Channels
Select your countr y for proper channel 
installation. 
1 Press  (Home).
2 Press  to select [Setup] > 
[Installation] > [Channel install.] > 
[Channel assistant].
  
3 Press  to select your countr y and then 
 to go to the nex t step.
  
4 Select [Start] and press OK to re-install 
channels. 
  
As the system searches for channels,    »
you have the option to [Stop] the 
process.
5  To stop searching, select [Stop] and press 
OK.
A dialogue box appears asking    »
you if you really want to [Stop] or 
[Continue] with the process.
Picture
Sound
Features
Installation
Software updateMenu language
Channel install.
Preferences
Decoder
Factory setting
Current softwareChannel assistant
Analogue: Manual
Select your countryAustria
Belgium
Croatia
Czech Republic
Denmark
Finland
France
Germany
Start automatic installation. This takes a few minutes.
Start?
6 Install channels
The first time you set up your TV, you are 
prompted to select a menu language and to 
install TV and digital radio channels (if available). 
This chapter provides instructions on how to 
re-install and fine tune channels.
Automatically install channels
This section describes how to search and store 
channels automatically.
Step 1 Select your menu language
Note
Skip this step if your language set tings are   •correct.
1 Press  (Home).
2 Press  to select [Setup] > 
[Installation] > [Language] > [Menu 
language].
3 Press  to enter [Menu language].
4 Press  to select a language setting and 
then OK to confirm.
  
5 Press  (Home) to exit.
Picture
Sound
Features
Installation
Software updateMenu language
Channel install.
Preferences
Decoder
Factory setting
Current softwareEnglish
Česky
Български
Dansk
Deutsch
Ελληνικά
Español
Français
English
EN
Downloaded From TУ-Manual.com Manuals 
						

							22
2 Press  to select [Setup] > 
[Installation] > [Channel install.] > 
[Analogue: Manual].
The    »[Analogue: Manual] menu appears.
3 Press  to select and enter [System].
4 Press  to select your countr y or 
region.
5 Press OK to confirm.
6 Press  (Home) to exit.
Step 2 Search and store new TV 
channels
1 Press  (Home).
2 Press  to select [Setup] > 
[Installation] > [Channel install.] > 
[Analogue: Manual].
The    »[Analogue: Manual] menu appears.
3 Press  to select and enter [Search].
4 Press  or use Numeric buttons to 
manually enter the three digit frequency.
5 Press OK to begin search.
If a channel is unavailable at the    »
selected frequency, the system searches 
for the next available channel.
6 Press  BACK when the new channel is 
found.
7 Press  to select [Store new channel] 
to store the new channel under a new 
channel number.
8 Press  to enter [Store new channel].
9 Press  to select [Yes] and press OK to 
store the new channel.
10 Press  (Home) to exit.
Step 3 Fine-tune analogue channels
1 Press  (Home).
2 Press  to select [Setup] > 
[Installation] > [Channel install.] > 
[Analogue: Manual].
The    »[Analogue: Manual] menu appears.
6 Press  to select [Stop] or [Continue].
7 Press OK to confirm your choice.
8  When done, press  (Home) to exit.
Manually install channels
This section describes how to search and store 
analogue TV channels manually.
1 Press  (Home).
2 Press  to select [Setup] > 
[Installation] > [Channel install.] > 
[Analogue: Manual].
The    »[Analogue: Manual] menu appears.
  
3 Press  to select the item you want to 
adjust.
• [System]
• [Search]
• [Fine-tune]
• [Store cur. chan.]
• [Store new channel]
• [Skip channel]
Step 1 Select your system
Note
Skip this step if your system set tings are   •correct.
1 Press  (Home).
Picture
Sound
Features
Installation
Software updateMenu language
Channel install.
Preferences
Decoder
Factory setting
Current softwareChannel assistant
Analogue: Manual
EN
Downloaded From TУ-Manual.com Manuals 
						

							23
3 Press  OPTIONS.
The channel options menu appears.   »
4 Press  to select and enter [Rename 
chan.].
A text input box appears.   »
5 Press  to select characters.
6 Press OK to confirm each of the 
characters.
Tip
Rename channels - the leng th of the name is   •limited to six characters.
Use   •[Aa] to change upper-case letter to lower-
case let ter and vice versa.
Rearrange channels
After you install channels, you can rearrange the 
order in which they appear.
1  When watching T V, press OK to display 
the channel grid .
2 Press  OPTIONS.
The channel options menu appears.   »
3 Press  to select and enter 
[Reorder].
4  Select the channel you want to reorder 
and press OK.
5 Press  to select the new position 
for the channel.
6 Press OK to confirm the new position.
7 Press  OPTIONS.
  »[Done reordering] appears.
8 Press OK to finish reordering.
3 Press  to select and enter [Fine-
tune].
4 Press  to adjust frequency.
5 Press OK when done.
6 Press  to select [Store cur. chan.] to 
store channel number.
7 Press  to enter [Store cur. chan.].
8 Press  to select [Yes] and press OK to 
store current channel.
9 Press  (Home) to exit.
Step 4 Skip channels
1 Press  (Home).
2 Press  to select [Setup] > 
[Installation] > [Channel install.] > 
[Analogue: Manual].
The    »[Analogue: Manual] menu appears.
3 Press  to select and enter [Skip 
channel].
4 Press  to select [Yes] and press OK to 
skip current channel.
The selected channel is skipped when    »
you press P +/- on your remote 
control or view the channel grid.
5 Press  (Home) to exit.
Note
You can restore a skipped channel to your   •channel listing (see ‘Step 2 Search and store 
new T V channels’ on page 22).
Rename channels
Channels can be renamed so that a name of 
your choice appears whenever the channel is 
selected.
1  When watching T V, press OK to display 
the channel grid .
2  Select the channel you want to rename.
English
EN
Downloaded From TУ-Manual.com Manuals 
						

							24
a  PC IN (VGA and AUDIO IN)
Audio and video input from a computer.
  
b HDMI 1
Digital audio and video input from high-
definition digital devices such as Blu-ray 
players.
  
c SERV. U
For use by ser vice personnel only.
d SPDIF OUT
Digital audio output to home theatres 
and other digital audio systems.
  
VGA
VGA
PC IN(AUDIO) 
7 Connect devices
This section describes how to connect 
various devices with different connectors and 
supplements examples provided in the Quick 
Star t.
Note
Different types of connectors may be used to   •connect a device to your TV, depending on 
availability and your needs.
Back connectors for 19-22 
inch TV
  
SERV.U
EN
Downloaded From TУ-Manual.com Manuals 
						

							25
h  EXT 2 (Y Pb Pr and AUDIO L/R)
Analogue audio and video input from analogue 
or digital devices such as DVD players or game 
consoles.
  
Back connectors for 26 inch 
and larger TV
  
SERV.U
HDMI 2/ DVI
VGA
e TV ANTENNA
Signal input from an antenna, cable or 
satellite.
  
f  AV OUT (VIDEO OUT and AUDIO 
OUT L/R)
Audio and video output to analogue 
devices such as another T V or a recording 
device.
  
g  EXT 1 (RGB and CVBS)
Analogue audio and video input from 
analogue or digital devices such as DVD 
players or game consoles.
  
TV ANTENNA
AUDIOIN
English
EN
Downloaded From TУ-Manual.com Manuals 
						

							26
d SPDIF OUT
Digital audio output to home theatres 
and other digital audio systems.
 
e  EXT 1 (RGB and CVBS) / CVBS (EXT 2)
Analogue audio and video input from 
analogue or digital devices such as DVD 
players or game consoles. EX T2 suppor ts 
S-Video.
 
f  EXT 3 (Y Pb Pr and AUDIO L/R)
Analogue audio and video input from 
analogue or digital devices such as DVD 
players or game consoles.
EXT1/ EXT2
(RGB/CVBS)/ (CVBS)
a  PC IN (VGA and AUDIO IN)
Audio and video input from a computer.
 
b HDMI 1/2
Digital audio and video input from high-
definition digital devices such as Blu-ray 
players.
 
c TV ANTENNA
Signal input from an antenna, cable or 
satellite.
 
VGA
VGA
PC IN(AUDIO) 
/ HDMI 2
TV ANTENNA
EN
Downloaded From TУ-Manual.com Manuals 
						

							27
a USB
Data input from USB storage devices.
 
b 
Stereo audio output to headphones or 
earphones.
c AUDIO L/R
Audio input from analogue devices 
connected to VIDEO.
 
d VIDEO
Composite video input from analogue 
devices such as VCRs.
 
 
g SERV. U
For use by ser vice personnel only.
Side connectors
 
1
2
6
3
4
5
English
EN
Downloaded From TУ-Manual.com Manuals 
						

							28
• HDMI cable
 
• DVI - HDMI cable
 
• HDMI cable and HDMI-DVI adaptor
 
DVI
LEFT / RIGHT
HDMI 1/ DVIAUDIO IN :PC IN(AUDIO)For TV of size 26 inch and largerFor TV of size 22 inch and smaller
HDMI 2/ DVI
/ HDMI 2
VGA
DVI
/ HDMI 2
LEFT / RIGHT
HDMI 1/ DVIAUDIO IN : PC IN(AUDIO)For TV of size 26 inch and larger
HDMI 2/ DVI
VGA
For TV of size 22 inch and smaller
e S-VIDEO
S-Video (side) to be used with Audio L /R 
connectors for camcorder, game console, 
etc. When you use the S-Video (side) for 
video signals, do not use the Composite 
video (side) input for video signals.
 
f HDMI
Digital audio and video input from high-
definition digital devices such as Blu-ray 
players.
  
Connect a computer
Before you connect a computer to the TV
Set the screen refresh rate on your  • 
computer to 60Hz.
Select a suppor ted screen resolution on  • 
your computer.
Connect a computer with one of the 
following connectors:
Note
Connections via DVI or VGA require an   •additional audio cable.
EN
Downloaded From TУ-Manual.com Manuals