Philips 200wp7e User Manual

e-Manual
  
  Philips LCD Monitor Electronic User’s Manual
 
  
    
   
 
  
    
   
 
         
file:///D|/EDFU/LCD/200WP7/manual/ENGLISH/200WP7/index.htm2006-08-04 11:\
01:04 AM 

Safety and Troubleshooting Information
   
        
 
 • Safety Precautions and 
Maintenance
 • FAQs
 • Troubleshooting
 • Regulatory Information
 • Other Related Information
 
Safety and Troubleshooting Information
Safety precautions and maintenance 
WARNING: Use of controls, adjustments or procedures other than 
those specified in this documentation may result in exposure to shock, 
electrical hazards and/or mechanical hazards. 
Read and follow these instructions when connecting and using your comput\...

Safety and Troubleshooting Information
 
 
 
Using two hands to lift your monitor is strongly recommended. 
 
Maintenance: 
l     To protect your display from possible damage, do not put excessive press\
ure on the LCD 
panel. When moving your monitor, grasp the frame to lift; do not lift th\
e monitor by 
placing your hand or fingers on the LCD panel.
l     Unplug the monitor if you are not going to use it for an extensive perio\
d of time.
l     Unplug the monitor if you need to clean it with a...

Safety and Troubleshooting Information
l     The casing cover should be opened only by qualified service personnel.
l     If there is any need for any document for repair or integration, please \
contact with your 
local service center. (please refer to the chapter of Consumer Informa\
tion Center)
 
l     For transportation information, please refer to Physical Specifications\
. 
l     Do not leave your monitor in a car/trunk under direct sun light. 
 
 
Consult a service technician if the monitor does...

FAQs (Frequently Asked Questions)
   
        
 
 
• 
Safety and Troubleshooting
 • General FAQs
 • Screen Adjustments
 • Compatibility with Other 
Peripherals
 • LCD Panel Technology
 
• Ergonomics, Ecology and 
Safety Standards
 • Troubleshooting
 • Regulatory Information
 • Other Related Information
  
 
FAQs (Frequently Asked Questions)
General FAQs 
Q:
 When I install my monitor what should I do if the screen shows Cannot \
display this video 
mode?
A: Recommended video mode for Philips 20:...

FAQs (Frequently Asked Questions)
Q: How do I adjust the resolution?
A: Your video card/graphic driver and monitor together determine the availa\
ble 
resolutions. You can select the desired resolution under Windows® Con\
trol Panel 
with the Display properties
.
Q: What if I get lost when I am making monitor adjustments?
A: Simply press the OK button, then select Reset to recall all of the or\
iginal factory 
settings.
Q: What is the Auto function?
A: The AUTO adjustment key restores the optimal screen...

FAQs (Frequently Asked Questions)
uses an active element (TFT) to control each individual pixel and the \
refresh rate is 
therefore not really applicable to LCD technology. 
 
 
Q: Will the LCD screen be resistant to scratches?
A: A protective coating is applied to the surface of the LCD, which is dura\
ble to a 
certain extent (approximately up to the hardness of a 2H pencil). In g\
eneral, it is 
recommended that the panel surface is not subject to any excessive shock\
s or 
scratches.
 
Q: How...

FAQs (Frequently Asked Questions)
 
Q: Can the Philips LCD Monitor be mounted on the wall?
A: Yes. Philips LCD monitors have this optional feature. Four standard VES\
A mount 
holes on the rear cover allows the user to mount the Philips monitor on \
most of the 
VESA standard arms or accessories. We recommend to contact your Philips \
sales 
representative for more information.
  
RETURN TO TOP OF THE PAGE
Screen Adjustments
Q:
 What is the FPadjust program on the CD-ROM?
A: The FPadjust program...

FAQs (Frequently Asked Questions)
RETURN TO TOP OF THE PAGE
Compatibility with other Peripherals
Q:
 Can I connect my LCD monitor to any PC, workstation or Mac?
A: Yes. All Philips LCD monitors are fully compatible with standard PCs, M\
acs and 
workstations. You may need a cable adapter to connect the monitor to you\
r Mac 
system. Please contact your dealer/retailer for more information.
 
Q: Are Philips LCD monitors Plug-and-Play?
A: Yes, the monitors are Plug-and-Play compatible with Windows® 95,...

FAQs (Frequently Asked Questions)
Q: What can I do if my USB peripherals dont work with the USB hub of my mo\
nitor? 
 
A: If you experience the problem, just detach and re-attach the USB hub ca\
ble 
between PC and your monitor, then refresh your PC device manager (Start\
 > Setting 
> Control panel > System > Hardware > Device manager > Refresh) or rebo\
ot your 
PC and the problem can be solved by above procedures.
 
RETURN TO TOP OF THE PAGE 
LCD Panel Technology
Q:
 What is a Liquid Crystal...