Philips 200ws8f User Manual
Here you can view all the pages of manual Philips 200ws8f User Manual. The Philips manuals for Monitor are available online for free. You can easily download all the documents as PDF.
Page 42
• Front View Produt Description • Connecting to Your PC • Getting Started • Optimizing Performance Installing Your LCD Monitor Front View Product Description 1To switch monitor’s power on and off 2 MENUTo access OSD menu 3 Hot key of Contrast adjustment and To adjust OSD value up when OSD menu is active 4 Hot key of Brightness adjustment and To adjust OSD value down when OSD menu is active 5 Automatically adjust the horizontal position, vertical position, phase...
Page 43
1AC power input 2 DVI-D input 3 VGA input 4 Kensington anti-thief lock RETURN TO TOP OF THE PAGE Optimizing Performance For best performance, ensure that your display settings are set at 1680x\ 1050, 60Hz. Note: To check the current display resolution, press the OK button once. The current display mode is shown on the OSD. If the display setting is \ not optimized, a warning string USE 1680x1050 FOR BEST RESULT appears in the OSD menu. You can also install the Flat Panel Adjust (FP Adjustment)...
Page 44
1.Put base on the desk and insert whole unit into base vertically 2.Check if insertion ok 3.Put whole unit horizontally
Page 46
• Front View Product Description • Accessory Pack • Connecting to Your PC • Getting Started • Optimizing Performance Connecting to Your PC Accessory Pack Unpack all the parts. Power cord VGA cable EDFU CD DVI cable (Optional) RETURN TO TOP OF THE PAGE Connecting to Your PC 1)
Page 48
(1)AC power input (2) DVI-D input (3) VGA input (4) Kensington anti-thief lock (5) Set your Monitor at 1680x1050@60Hz for best performance. It is also strongly recommended to use DVI input (may require the optional DVI cab\ le) for the true digital enjoyment. RETURN TO TOP OF THE PAGE
Page 49
Your LCD Monitor : • Front View Product Description • Setting Up and Connecting Your Monitor • Getting Started • Optimizing Performance Getting Started Getting Started Use the information file ( .inf) for Windows® 95/98/2000/Me/XP /Vista or later The built-in VESA DDC2B feature in Philips Monitors supports Plug & Play\ requirements for Windows® 95/98/2000/Me/XP /Vista. This information file ( .inf) should be installed in order that your...
Page 50
7.Select Display a list of the known drivers for this device so that I ca\ n choose a specific driver, then click on Next and then click on Have disk....\ 8.Click on the Browse... button then select the appropriate drive F: ( \ CD-ROM Drive). 9.Click on the Open button, then click on the OK button. 10.Select your monitor model and click on the Next button. 11.Click on the Finish button then the Close button. If you can see the Digital Signature Not Found window, click on the Y\ es button. For...