Philips 220s2s User Manual

							
19

Task Tray Menu Enabled
The task tray menu can be displayed by right-
clicking on the Smar tControl Premium icon from 
the task tray. Left Click will launch the application.
The task tray has five entries:
•	Help - Access to User Manual file: Open 
 
 
User Manual file using the default browser   
 
window. 
•	 Technical Suppor t - displays the tech suppor t 
 
 
page. 
•	 Check for Update - takes the user to PDI 
 
	 Landing
	 and 	 checks 	 the 	 user's 	 version 	 against 	 	
 
the most current available. 
•	 About - Displays detailed reference 
 
 
information: product version, release   
 
information, and product name. 
•	 Exit - Close Smar tControl Premium
  To run Smar tControl Premium again either   
  select Smar tControl Premium from Program   
  menu, double-click the desktop PC icon or   
  restar t the system. Task Tray Menu Disabled
When
	 the 	 Task 	 Tray 	 is 	 disabled 	 in 	 the 	 preference 	
folder, only the EXIT selection is available. To 
completely remove Smar tControl Premium 
from the task tray, disable Run at Star tup in 
Options>Preferences.  
 
						

							
20
3.6
 
Philips' Flat Panel Monitors Pixel 
   
Defect Policy
Philips strives to deliver the highest quality 
products. We use some of the industr y's most 
advanced manufacturing processes and practice 
stringent quality control. However, pixel or sub 
pixel defects on the TFT LCD panels used in flat 
panel monitors are sometimes unavoidable. No 
manufacturer can guarantee that all panels will 
be free from pixel defects, but Philips guarantees 
that any monitor with an unacceptable number 
of defects will be repaired or replaced under 
warranty. This notice explains the different types 
of pixel defects and defines acceptable defect 
levels for each type. In order to qualify for repair 
or replacement under warranty, the number of 
pixel defects on a TFT LCD panel must exceed 
these acceptable levels. For example, no more 
than 0.0004% of the sub pixels on a 22" XGA 
monitor may be defective. Fur thermore, Philips 
sets even higher quality standards for cer tain 
types or combinations of pixel defects that are 
more noticeable than others. This policy is valid 
worldwide.
Pixels and Sub pixels 
A pixel, or picture element, is composed of three 
sub pixels in the primar y colors of red, green and 
blue. Many pixels together form an image. When 
all sub pixels of a pixel are lit, the three colored 
sub pixels together appear as a single white pixel. 
When all are dark, the three colored sub pixels 
together appear as a single black pixel. Other 
combinations of lit and dark sub pixels appear as 
single pixels of other colors.
Types of Pixel Defects 
Pixel and sub pixel defects appear on the screen 
in different ways. There are two categories of pixel 
defects and several types of sub pixel defects 
within each categor y. 
Bright Dot Defects Bright dot defects appear as 
pixels or sub pixels that are always lit or 'on'. That 
is, a bright dot is a sub-pixel that stands out on the 
screen when the monitor displays a dark pattern. 
There are the types of bright dot defects:
One lit red, green or blue sub pixel
Two adjacent lit sub pixels:
-
  Red + Blue = Purple
-    Red + Green = Yellow
-    Green + Blue = Cyan (Light Blue)
Three adjacent lit sub pixels (one white pixel)
 
						

							
21

 Note
A red or blue bright dot must be more  than 50 
percent brighter than neighboring dots while 
a green bright dot is 30 percent brighter than 
neighboring dots.
Black Dot Defects Black dot defects appear as 
pixels or sub pixels that are always dark or 'off'. 
That is, a dark dot is a sub-pixel that stands out 
on the screen when the monitor displays a light 
pattern. These are the types of black dot defects: Proximity of Pixel Defects 
Because pixel and sub pixels defects of the same 
type that are near to one another may be more 
noticeable, Philips also specifies tolerances for the 
proximity of pixel defects.
Pixel Defect Tolerances
In order to qualify for repair or replacement due 
to pixel defects during the warranty period, a TFT 
LCD panel in a Philips flat panel monitor must 
have pixel or sub pixel defects exceeding the 
tolerances listed in the following tables.

   BRIGHT DOT DEFECTS
ACCEPTABLE LEVEL
  
MODEL  
220S2/
220S2 plus
   1 lit subpixel
3
   2 adjacent lit subpixels 1
   3 adjacent lit subpixels (one white pixel) 0
   Distance between two bright dot defects* >15mm
   Total bright dot defects of all types 3

   BLACK DOT DEFECTSACCEPTABLE LEVEL
  
MODEL 220S2/
220S2 plus
   1 dark subpixel 5 or fewer
   2 adjacent dark subpixels 2 or fewer
   3 adjacent dark subpixels 0
   Distance between two black dot defects* >15mm
   Total black dot defects of all types 5 or fewer

   TOTAL DOT DEFECTSACCEPTABLE LEVEL
  
MODEL 220S2/
220S2 plus
    Total bright or black dot defects of all types 5 or fewer

 
Note 
1 or 2 adjacent sub pixel defects = 1 dot defect
This monitor is ISO9241-307 compliant.
 
						

							
22

4  Technical Specifications
220S2/ 220S2 plus

   Picture/Display
   LCD panel type
   TFT-LCD
   Backlight    CCFL
   Panel size    22'' W (55.9 cm)
   Aspect ratio    16:10
   Pixel Pitch    0.282 x 0.282 mm
   Brightness    250 cd/m² 
   Smar tContrast    50000:1
   Contrast ratio (typ.)    1000:1
   Response time (typical)     5 ms
   Optimum Resolution    1680 x 1050 @ 60Hz
    Viewing angle    176° (H) / 170° (V) @ C/R > 5
   Picture Enhancement    Smar tImage
   Display colors     16.7 M
    Ver tical refresh rate    56Hz -76Hz 
   Horizontal Frequency    30kHz - 80kHz
   sRGB     YES
   Connectivity
   Signal input    DVI-D (digital, HDCP), VGA (Analog)
   Input Signal    Separate Sync, Sync on Green
   Convenience
   User Convenience    Smar timage/

, Brightness/
, Power On/Off ,  
/back, 
   Menu (OK)
   OSD Languages    English, French, German, Italian, Russian, Spanish, 
   Simplified Chinese, Por tuguese
   Other convenience    VESA mount ( 100 x 100mm), Kensington lock
   Plug & Play Compatibility    DDC/CI, sRGB, Windows 7/Vista/XP, Mac OSX, Linux 
   Stand
   Tilt     -5/+20 (220S2/
220S2  plus
)
  Swivel    -65/+65 (
220S2  plus
)
  Height adjustment    70mm (
220S2  plus
)
 
						

							
23

   Power
   On mode   
						

							
24

   Environmental
   ROHS    YES
   EPEAT   Silver. (www.epeat.net)
   Packaging   100% recyclable
   Compliance and standards
    Regulator y Approvals   CE Mark, Energy Star 5.0, FCC Class B, SEMKO, TCO5.0, TÜV/    GS, TÜV Ergo, UL/cUL
   Cabinet
   Color   Black/Sliver, Black/Black
   Finish   Texture

 
Note 
This data is subject to change without notice. 
Go to www.philips.com/suppor t to download the latest version of leaflet.
 
						

							
25
4.1
 
Resolution & Preset Modes
4.2  Automatic PowerSaving
If  you  have VESA  DPM  compliance  display  card 
or  software  installed  in  your  PC,  the  monitor  can 
automatically reduce its power consumption when 
not  in  use.  If  an  input  from  a  keyboard,  mouse  or 
other  input  device  is  detected,  the  monitor  will 
'wake  up'  automatically. The  following  table  shows 
the  power  consumption  and  signaling  of  this 
automatic power saving feature:
 

  Maximum Resolution
For 220S2/ 220S2 plus
  1680 x 1050 at 60 Hz (analog input) 
  1680 x 1050 at 60 Hz (digital input)

 Recommended Resolution
 For 220S2/ 220S2
 plus
  1680 x 1050 at 60 Hz (digital input)

H. freq (kHz) Resolution V. freq (Hz)31.469 640x350 70.08631.469 720x400 70.08631.469 640x480 59.94035.000 640x480 67.00037.500 640x480 75.00035.156 800x600 56.25037.879 800x600 60.31746.875 800x600 75.00048.363 1024x768 60.00460.023 1024x768 75.02963.981 1280x1024 60.02079.976 1280x1024 75.02555.469 1440x900 59.90155.935 1440x900 59.88770.635 1440x900 74.98466.587 1920x1080 60.000 
(reduce blinking) 
65.290 1680x1050 60.000 64.674 1680x1050 60.000

Power Management DefinitionVESA 
Mode  Video  H-sync  V-sync  Power 
UsedLED color 
Active  ON  Yes Yes < 28.5 W  (typ.)
< 31 W  (max.)  White 
Sleep  OFF No No < 0.8 W  (typ.) White 
(Blinking)
Switch Off OFF - - < 0.5 W  (typ.)OFF
This  monitor  is  ENERGY  STAR
®  compliant. As  an  ENERGY  STAR® 
Par tner, we have determined that this product meets the ENERGY STAR® 
guidelines for energy efficiency.

  Note 
This data is subject to change without notice.       
The  following  setup  is  used  to  measure  power 
consumption on this monitor.
Native resolution: 1680x1050.
Contrast: 50%
Brightness: 250 nits
Color temperature: 6500k with full white pattern
Audio and USB Inactive (Off)
 
						

							
26
5  Regulatory Information

Lead-free Product

Lead free display promotes 
environmentally sound recover y and 
disposal of waste from electrical and 
electronic equipment. Toxic substances 
like Lead has been eliminated and compliance 
with European community’s stringent RoHs 
directive mandating restrictions on hazardous 
substances in electrical and electronic equipment 
have been adhered to in order to make Philips 
monitors safe to use throughout its life cycle.
TCO Displays 5.0 Information

Congratulations, 
Your display is designed for both 
you and the planet!
This display carries the TCO 
Cer tified label. This ensures that 
the display is designed for minimal impact on the 
climate and natural environment, while offering 
all the performance expected from top of the 
line electronic products. TCO Cer tified is a third 
par ty verified program, where ever y product 
model is tested by an accredited independent 
test laborator y. TCO Cer tified represents one of 
the toughest cer tifications for displays worldwide.
Some of the Usability features of the TCO 
Displays 5.0 requirements:
Visual Ergonomics
Good visual ergonomics in order to improve the 
working environment for the user and to reduce 
sight and strain problems. Impor tant parameters 
are:
•	 Light
	
levels
	
without 	 color 	 tint, 	 Uniform 	 color 	
 
and luminance, Wide color gamut  •	 Calibrated
	 color 	 temperature 	 and 	 gamma 	 	
  cur ve 
•	 Wide 	 luminance 	 level, 	 Dark 	 black 	 levels, 	 Low 	 	
  motion blur 
Electrical Safety
•	 Product 	 fulfills 	 rigorous 	 safety 	 standards 	
  Emissions
•	 Low 	 alternating 	 electric 	 and 	 magnetic 	 fields 	 	
  emissions 
•	 Low 	 acoustic 	 noise 	 emissions 	
  Some of the Environmental features of the   
  TCO Displays 5.0 requirements: 
•	 The 	 brand 	 owner 	 demonstrates 	 corporate 	 	
  social responsibility and has a cer tified   
  environmental management system (EMAS or   
  ISO 14001) 
•	 Ver y 	 low 	 energy 	 consumption 	 both 	 in 	 on- 	 and 	 	
  standby mode 
•	 Restrictions 	 on 	 chlorinated 	 and 	 brominated 	 	
  flame retardants, plasticizer and polymers 
•	 Restrictions 	 on 	 heavy 	 metals 	 such 	 as 	 cadmium, 	 	
  mercur y and lead (RoHS compliance)
EPEAT 
(www.epeat.net)

“The EPEAT (Electronic Product 
Environmental Assessment Tool) 
program evaluates computer 
desktops, laptops, and monitors 
based on 51 environmental criteria 
developed through an extensive stakeholder 
consensus process suppor ted by US EPA.
EPEAT system helps purchasers in the public 
and private sectors evaluate, compare and select 
desktop computers, notebooks and monitors 
based on their environmental attributes. EPEAT 
also provides a clear and consistent set of 
performance criteria for the design of products, 
and provides an oppor tunity for manufacturers to 
secure market recognition for effor ts to reduce 
the environmental impact of its products.”
 
						

							
27
Benefits of EPEAT
Reduce use of primar y materials
Reduce use of toxic materials
Avoid the disposal of hazardous waste EPEAT’S 
requirement that all registered products meet 
ENERGY STAR’s energy efficiency specifications, 
means that these products will consume less 
energy throughout their life.
CE Declaration of Conformity
This product is in conformity with the following 
standards 
•	 EN60950-1:2006
	
(Safety
	
requirement
	
of
	
	
 
Information Technology Equipment) 
•	 EN55022:2006
	
(Radio
	
Disturbance
	
	 	
 
requirement of Information Technology 
 
 
Equipment) 
•	 EN55024:1998+A1:2001+A2:2003
	
		
 
(Immunity requirement of Information 
 
 
 Technology Equipment) 
•	 EN61000-3-2:2006
	
(Limits
	
for
	
Harmonic
	
	
 
Current Emission) 
•	 EN61000-3-3:1995+A1:2001+A2:2005
	
	
 
(Limitation of Voltage Fluctuation and Flicker)
 
following provisions of directives applicable
•	 2006/95/EC
	
(Low
	
Voltage
	
Directive)
	
•	 2004/108/EC
	
(EMC
	
Directive)
	
•	 2005/32/EC
	
(EuP
	
Directive,
	
EC
	
No.
	
		
 
1275/2008 mplementing Directive for 
 
 
Standby and Off mode power consumption) 
 
 
and is produced by a manufacturing 
  
 
organization on ISO9000 level. 
 
The product also comply with the following 
 
 
standards 
•	 ISO9241-307:2008
	
(Ergonomic
	
requirement,
	
	
 
Analysis and compliance test methods for 
 
 
electronic visual displays)  
•	 GS
	
EK1-2000:2009
	
(GS
	
mark
	
requirement)
		
•	 prEN50279:1998
	
(Low
	
Frequency
	
Electric
	
	
 
and Magnetic fields for Visual Display) 
•	 MPR-II
	
(MPR:1990:8/1990:10
	
Low
	
Frequency
	
	
 
Electric and Magnetic fields) 
•	 TCO
	
Displays
	
5.0
	
(Requirement
	
for
 
Environment Labeling of Ergonomics, 
 
 
Energy,  Ecology and Emission, TCO: Swedish 
 
 
Confederation of Professional Employees) 
 
 
for TCO versions  Energy Star Declaration
(www.energystar.gov)
This monitor is equipped with a function for saving 
energy which suppor ts the VESA Display Power 
Management (DPM) standard. This means that the 
monitor must be connected to a computer which 
suppor ts VESA DPM. Time settings are adjusted 
from the system unit by software.

VESA State LED Indicator Power 
Consumption
 Normal 
 operation ON (Active) White < 24 W (typ.)
 Power Saving
 Alternative 2
 One step Sleep
Switch Off White Blinking
Off < 0.8 W (typ.)
< 0.5 W (typ.)

As an ENERGY STAR
®
 Par tner, 
we have determined that this 
product meets the ENERGY STAR ®
 
guidelines for energy efficiency.

  Note
We recommend you switch off the monitor when 
it is not in use for a long time.
 
						

							
28
Federal Communications Commission (FCC) 
Notice (U.S. Only)

 
This equipment has been tested and found   
  to comply with the limits for a Class B digital   
  device, pursuant to Par t 15 of the FCC 
  Rules. These limits are designed to     
  provide reasonable protection against   
  harmful interference in a residential     
  installation. This equipment generates, uses   
  and can radiate radio frequency energy and,   
  if not installed and used in accordance with
  the instructions, may cause harmful     
  interference to radio communications.   
  However, there is no guarantee that    
  interference will not occur in a par ticular   
  installation. If this equipment does cause   
  harmful interference to radio or television   
  reception, which can be determined by   
  turning the equipment off and on, the user 
  is encouraged to tr y to correct the     
  interference by one or more of the following   
  measures:
•	 Reorient
	 or 	 relocate 	 the 	 receiving 	 antenna. 	
•	 Increase 	 the 	 separation 	 between 	 the 	 	
  equipment and receiver. 
•	 Connect
	 the 	 equipment 	 into 	 an 	 outlet 	 on 	 	
  a circuit different from that to which the   
  receiver is connected. 
•	 Consult
	 the 	 dealer 	 or 	 an 	 experienced 	 radio/	
  TV technician for help.
  Changes or modifications not expressly   
  approved by the par ty responsible for   
  compliance could void the user's authority   
  to operate the equipment.
Use only RF shielded cable that was supplied with 
the monitor when connecting this monitor to a 
computer device. 
To prevent damage which may result in fire or 
shock hazard, do not expose this appliance to rain 
or excessive moisture. 
THIS CLASS B DIGITAL APPARATUS MEETS 
ALL REQUIREMENTS OF THE CANADIAN 
INTERFERENCE-CAUSING EQUIPMENT 
REGULATIONS. FCC Declaration of Conformity
Declaration of Conformity for Products Marked 
with FCC Logo, 
United States Only
This device complies with Par t 15 of the FCC 
Rules. Operation is subject to the following two 
conditions: (1) this device may not cause harmful 
interference, and (2) this device must accept any 
interference received, including interference that 
may cause undesired operation.