Philips 32pf9551 User Manual

Safety warnings . . . . . . . . . . . . . . . . . . . . . . . . . 2
Getting started  . . . . . . . . . . . . . . . . . . . . . . . . . 3
Use of the remote control RC4401/01  . . . . . . 5
Use of the option key  . . . . . . . . . . . . . . . . . . . 7 
Keys at the right side of the TV . . . . . . . . . . . . 7
Switch the TV on  . . . . . . . . . . . . . . . . . . . . . . . 8
First time installation  . . . . . . . . . . . . . . . . . . . . 8
How to navigate through the menus  . . . . . . . 11
Use of the...

2
ENSafety warnings
Do not insert the power plug in a wall socket
or hang the TV to the wall before all
connections are made.
• Place or hang the TV wherever you want, butmake sure that air can circulate freely through the
ventilation slots.
• Do not install the TV in a confined space such as a book case or a similar unit.
• To prevent any unsafe situations, no naked flame
sources, such as lighted candles, should be placed
in the vicinity.
• Avoid heat, direct sunlight and exposure to rain or water.
•...

Before you switch on your TV, connect all your peripheral equipment. See To make video and audio
connections, p. 37.
There is a wide range of audio and video equipment that can be connected to your TV. See To make
audio and video connections, p. 37.
EXT1can handle CVBS, RGB and Audio L/R;
EXT2can handle CVBS, S-VIDEO, RGB, Audio L/R;
EXT3can handle YPbPr, RGB H/V and Audio L/R;
HDMI 1and 2.
Supported video formats: 480i, 480p, 576i, 576p, 720p, 1080i.
3
Getting startedEN
Warning: do not insert the mains...

BStandby
Press to switch the TV from or to standby mode.
When switched to standby, a red indicator on the TV lights up.
TVPress to select TV mode.
DVD  STB  VCR  AUX
Press one of these keys to set your remote control to
operate a peripheral device.
See Audio and Video equipment keys, p. 47.
DEMOPress to switch the Demo menu on or off.
Colour keys
- When functions are attached to the colour keys, the
colour keys are shown on screen.
- To select a page in Teletext mode.
OPTION
- To open and close the Quick...

+P-Channel selection
- to browse through the TV channels and sources stored
and marked in the Favourite channels lists;
- to select a page in Teletext mode;
- to quickly browse through the lists in the menus;
- to switch the TV on from standby mode.
0/9 Digit keys 
To select a TV channel between 0 and 999.
AVSelect your peripherals
See Installation menu, Select your connections, p. 29.
0Previous channel
Press to alternate between the currently viewed and the
previously viewed TV channel.
Ambilight-
MODE...

EN
7
a
Use of the OPTION key 
In case your remote is lost or broken, apart from
channel selection and volume adjustment, you can still
change some of the basic settings with the keys at the
side of your TV.

EN
8
Note: if the TV has already been installed before and/or you
want to change the First time installation settings, proceed
with Use of the TV menu settings, p. 12.
Switch the TV on
An indicator on the front of the TV lights up and the
screen comes on.

After the Welcome screen you are asked to select a language of
the TVs on-screen menus. The text of the header and the info
on screen continuously change language.
1. Press the cursor up/down to highlight your language.
2. Press the 
OKkey on the remote control.
3. Follow the instructions on screen to proceed.
EN
9
First time installation  (Continued)
a
Step 1: select your on-screen language
3. Press the green colour key on your remote control to start
the Automatic channel installation.
>All available...

By means of several split screens/full screens you are
prompted to select your preferred picture, sound and
ambilight settings, to finally arrive at a complete setting
which satisfies you.
1. Press the green colour key on your remote control to enter
the Settings assistantmenu.
2. Select your Location with the cursor up/down.
>If you choose Shopit will skip the Settings assistant.
The TV parameters for Picture, Sound and Ambilight will
then be set to predefined fixed settings.
Press the green colour key...