Philips Epiq 5 Manual

 Table 4.46  
FILM SESSION SOP CLASS N -CREATE REQUEST ATTRIBUTES  
Attribute Name  Tag  VR  Value  
Presence 
of Value Source  
Number of 
Copies  (2000,0010)
 IS  Default 1.  User defined in Device Configuration.  ALWAYS  USER  
Print Priority  (2000,0020)  CS HIGH   ALWAYS AUTO  
Medium Type  (2000,0030)  CS BLUE FILM, CLEAR FILM or PAPER*  ALWAYS USER  
Film Destination  (2000,0040)  CS MAGAZINE or PROCESSOR*  ALWAYS USER  
Film Session 
Label  (2000,0050)
 LO Philips Medical Systems   ALWAYS AUTO...

 Table 4.48  
FILM BOX SOP CLASS N -CREATE REQUEST ATTRIBUTES  
Attribute Name  Tag  VR  Value  
Presence 
of Value Source  
Image Display 
Format  (2010,0010)
 ST STANDARD
\1,1  
2 or  
CUSTOM \xxx depending on printer.    
Default is displayed, and is user editable.  Edit 
only when a valid substitute value is known.  ALWAYS
 AUTO/USER  
Referenced Film 
Session 
Sequence (2010,0500)
 SQ   ALWAYS AUTO  
>Referenced 
SOP Class UID  (0008,1150)
 UI  1.2.840.10008.5.1.1.1   ALWAYS AUTO  
>Referenced 
SOP...

 4.2.3.3.1.4.2  Film Box SOP Class Operations (N -ACTION)  
The Hardcopy AE issues an N -ACTION Request to instruct the Print SCP to print the contents of the Film Box.   
Table  4.50  summarizes the behavior of Hardcopy AE when encountering status codes in an N -ACTION response.  
Ta ble  4.50  
FILM BOX SOP CLASS N -ACTION RESPONSE STATUS HANDLING BEHAVIOR 
Service  Status   Further Meaning
 Error Code  Behavior 
Success  Success  0000  The SCP has completed the operation 
successfully.  The film has...

 
>Rows   (0028,0010) US Depends on film size, number of rows for 
entire sheet of film 
  ALWAYS
 Printer 
Configuration 
File
 
>Columns   (0028,0011) US Depends on film size, number of columns 
for entire sheet of film
  ALWAYS
 Printer 
Configuration 
File
 
>Bits Allocated  (0028,0100)  US 8  ALWAYS AUTO  
>Bits Stored  (0028,0101)  US 8  ALWAYS AUTO  
>High Bit   (0028,0102) US 7  ALWAYS AUTO  
>Pixel Representation  (0028,0103)  US 0  ALWAYS AUTO  
>Pixel Data   (7FE0,0010)  OW Pixels of rendered...

 Table 4.54  
DICOM APPLICATION CONTEXT FOR AE VERIFICATION  
Application Context Name  1.2.840.10008.3.1.1.1 
 
4.2.4.2.2 Number of Associations  
EPIQ/Affiniti  initiates one Association at a time for a Verification request.  
Table  4.55  
NUMBER OF ASSOCIATIONS INITIATED FOR AE VERIFICATION  
Maximum number of simultaneous Associations  Up to 10, one for each configured 
remote device
 
 
 
Table  4.56  
NUMBER OF ASSOCIATIONS ACCEPTED FOR AE VERIFICATION  
Maximum number of simultaneous Associations...

 
4.2.4.3 Association Initiation Policy  
4.2.4.3.1  Activity  – Verify  Remote  SCP 
4.2.4.3.1.1  Description and Sequencing of Activities  
The user selecting the “Verify” button on the Device configuration page initiates the verification request to the device 
whose data has just been configured.  This tool allows the user to ensure all data (AE Title, Port and IP Address) was 
correctly entered and the remote device may be contacted. It uses C -Echo and verifies the remote device supports all...

 Table 4.59  
PROPOSED PRESENTATION CONTEXTS FOR ACTIVITY VERIFICATION  
Presentation Context Table  
Abstract Syntax  Transfer Syntax   
 
Role    
Ext.  
Neg.  
Name   UID  Name List  UID List 
Verification   1.2.840.10008.1.1  Implicit VR Little Endian
 
Explicit VR Little Endian  1.2.840.10008.1.2
 
1.2.840.10008.1.2.1  SCU
 None  
 
4.2.4.3.1.3  SOP Specific Conformance for Verification  
When Verification of a remote AE is requested in PSC –  Network/DICOM  – DICOM Settings, the Association...

 
DICOM Structured Report Server Comprehensive Struct ured Report Storage 
Verification   Configuration of this device is only 
required if SRs are to be 
exported to 
a  dedicated Structured Report 
Server  Storage SCP . 
To activate this server, it must be 
selected in the PSC –  
Network/DICOM  – DICOM Selection 
page.  
DICOM BW Printer  Basic Grayscale META Print  
Verification   All 
BW  printers configure this entry.  
If the printer supports both BW and 
Color, then this must be configured 
to...

 
1. Open Association2. C-ECHO Request
4. Close Association
Verification  SCPVerification SCU
3. C-ECHO Response
 
Figure 8b  
SEQUENCING OF ACTIVI TY – VERIFICATION BY REMO TE AE 
4.2.4.4.1.2  Accepted Presentation Contexts  
EPIQ/Affiniti  will accept  Presentation Contexts as shown in the following table:  
Table  4.62  
ACCEPTABLE PRESENTAT ION CONTEXTS FOR  
ACTIVITY VERIFICATIO N BY REMOTE AE 
Presentation Context Table  
Abstract Syntax  Transfer Syntax   
 
Role    
Ext.  
Neg.  
Name   UID  Name...

 
 
If both wired and wireless networks are configured, EPIQ/Affiniti will select the best available network automatically as 
followed:  
•   The  Wired network has priority and it will be used if available  
•   The Wireless network will be automatically used if the wired network is not available.  
4.3.2  Additional Protocols  
EPIQ/Affiniti  supports the following additional protocols:  
•   Dynamic Host Configuration Pr otocol (DHCP):  If enabled by the user, DHCP is used to acquire network...