Philips Hd 7 User Manual
Have a look at the manual Philips Hd 7 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 619 Philips manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
HD7/HD7XE 3.0 DICOM Conformance Statement 000245000000008 Rev. A Page 31 Attribute Name Tag VRN-CREATE N-SET Scheduled Step Attributes Sequence (0040,0270) SQ > Accession Number (0008,0050)SHFrom MWL or user PDE input. MWL value may be edited. > Referenced Study Sequence (0008,1110)SQOne item per item in the MWL Reference Study Sequence. Absent if unscheduled. >> Referenced SOP Class UID (0008,1150)UI Same value as in of the Reference Study Sequence in the MWL >> Referenced SOP Instance UID (0008,1155)UI Same value as in of the Reference Study Sequence in the MWL > Study Instance UID (0020,000D)UI Same value as in MWL attribute or auto generated > Requested Procedure Description (0032,1060) LOSame value as in MWL attribute, 1st Choice, from “Study Description” in PDE, else NULL > Scheduled Procedure Step Description (0040,0007) LOSame value as in MWL attribute, else NULL > Scheduled Protocol Code Sequence (0040,0008) SQSame value as in MWL attribute, else NULL > Scheduled Procedure Step ID (0040,0009)SHSame value as in MWL attribute, else NULL > Requested Procedure ID (0040,1001)SHSame value as in MWL attribute, else NULL Performed Series Sequence (0040,0340)SQ One item per acquired series > Retrieve AE Title (0008,0054)AEZero Length Same > Series Description (0008,103E)LOZero Length Same > Performing Physician’s Name (0008,1050)PNFrom the “Performed by” field in PDE From the “Performed by” field in PDE > Operator’s Name (0008,1070)PNSuspect From the “Performed by” field in PDE Same > Referenced Image Sequence (0008,1140)SQZero Length Zero Length > Protocol Name (0018,1030)LO”CLR Standard” “CLR Standard” > Series Instance UID (0020,000E)UI Auto Generated Same > Referenced Non-Image Composite SOP Instance Sequence (0040,0220) SQZero Length Zero Length
HD7/HD7XE 3.0 DICOM Conformance Statement 000245000000008 Rev. A Page 32 4.2.2.4 Association Acceptance Policy The Workflow Application Entity does not accept Associations. 4.2.3 Hardcopy Application Entity Specification 4.2.3.1 SOP Classes HD7/HD7XE 3.0 provides Standard Conforma nce to the following SOP Classes: Table 31 SOP CLASSES FOR AE HARDCOPY SOP Class Name SOP Class UID SCU SCP Basic Grayscale Print Management Me ta 1.2.840.10008.5.1.1.9 Yes No Basic Color Print Management Meta 1.2.840.10008.5.1.1.18 Yes No The Print Meta SOP Classes are defined by the following set of supported SOP Classes: • Basic Film Session SOP Class • Basic Film Box SOP Class • Basic Grayscale ( or Color) Image Box SOP Class • Printer SOP Class 4.2.3.2 Association Establishment Policy 4.2.3.2.1 General The DICOM standard application context name for DICOM 3.0 is always proposed: Table 32 DICOM APPLICATION CONTEXT FOR AE HARDCOPY Application Context Name 1.2.840.10008.3.1.1.1 4.2.3.2.2 Number of Associations HD7/HD7XE 3.0 initiate one Association at a time for each configured hardcopy device. Multiple hardcopy devices can be configured. Table 33 NUMBER OF ASSOCIATIONS INITIATED FOR AE HARDCOPY Maximum number of simultaneous Associations 2 4.2.3.2.3 Asynchronous Nature HD7/HD7XE 3.0 do not support asynchronous communication (multiple outstanding transactions over a single Association). Table 34 ASYNCHRONOUS NATURE AS A SCU FOR AE HARDCOPY Maximum number of outstanding asynchronous transactions 1
HD7/HD7XE 3.0 DICOM Conformance Statement 000245000000008 Rev. A Page 33 4.2.3.2.4 Implementation Identifying Information The implementation information for this Application Entity is: Table 35 DICOM IMPLEMENTATION CLASS AND VERSION FOR AE HARDCOPY Implementation Class UID 1.3.46.670589.14.3000.300 Implementation Version Name HD7_300 4.2.3.3 Association Initiation Policy 4.2.3.3.1 Activity – Film Images 4.2.3.3.1.1 Description and Sequencing of Activities The system composes images onto film sheets and sends print requests to job queue. Hardcopy AEPrinter 1. Open Association 2. N-GET (Printer) 3. N-CREATE (Film Session) 4. N-CREATE (Film Box) 5. N-SET (Image Box) 6. N-ACTION (Film Box) 7. Print film sheets 8. Close Association Figure 7 SEQUENCING OF ACTIVITY – PRINT IMAGES Figure 7 illustrates a typical sequence of DIMSE mess ages sent over an association between Hardcopy AE and a Printer. Two DICOM Printers may be simultaneously configured, one for BW and one for Color prints. If both BW and Color printers are configured and selected, t he user may choose to automatically send BW prints only to the BW printer and color prints only to the color printer. This feature may only be used while configured for “Send as you go”, during the exam. Re-selecting the exam after it has been ended will send all images to both printers. If less than a full page is sent, then the remaining blank spaces will be sent black.
HD7/HD7XE 3.0 DICOM Conformance Statement 000245000000008 Rev. A Page 34 Status of the print-job is reported through the Job Manager (CNTL-J). Only one job will be active at a time for each separate hardcopy device. If any Response from the remo te Application contains a status other than Success or Warning, the Association is aborted and t he related Job is switched to a failed state. It can be restarted any time by user interaction. 4.2.3.3.1.2 Proposed Presentation Contexts Table 36 shows the Presentation Contexts HD7/HD7XE 3.0 are capable of proposing. Table 36 PROPOSED PRESENTATION CONTEXTS FOR ACTIVITY FILM IMAGES Presentation Context Table Abstract Syntax Transfer Syntax Role Ext. Neg. Name UID Name List UID List Basic Grayscale Print Management Meta 1.2.840.10008.5.1. 1.9 Implicit VR Little Endian Explicit VR Little Endian 1.2.840.10008.1.2 1.2.840.10008.1.2.1 SCU None Basic Color Print Management Meta 1.2.840.10008.5.1. 1.18 Implicit VR Little Endian Explicit VR Little Endian 1.2.840.10008.1.2 1.2.840.10008.1.2.1 SCU None 4.2.3.3.1.3 Common SOP Specific Conf ormance for all Print SOP Classes Table 37 summarizes the general behavior of Hardcopy AE during communication failure. This behavior is common for all SOP Classes supported by Hardcopy AE. Table 37 HARDCOPY COMMUNICATION FAILURE BEHAVIOR Exception Behavior Timeout The Association is aborted and reported as “Failed.” Association aborted by the SCP or network layers ”Network Communication Failure” is reported. 4.2.3.3.1.4 SOP Specific Conformance for the Printer SOP Class Hardcopy AE supports the following DIMSE operatio ns and notifications for the Printer SOP Class: — N-GET Details of the supported attributes and status hand ling behavior are described in the following subsections. 4.2.3.3.1.4.1 Printer SOP Class Operations (N-GET) Hardcopy AE uses the Printer SOP Class N-GET operation to obtain information about the current printer status. Table 38 lists the attributes obtained via N-GET. Table 38 PRINTER SOP CLASS N-GE T RESPONSE ATTRIBUTES Attribute Name Tag VR Value Presence of Value Source Printer Status (2110,0010) CS Provided by Printer ALWAYS Printer The Printer Status information is evaluated as follows: 1. If Printer status (2110,0010) is NORMAL, the print-job continues to be printed.
HD7/HD7XE 3.0 DICOM Conformance Statement 000245000000008 Rev. A Page 35 2. If Printer status (2110,0010) is FAILURE, the print-job is marked as failed. 3. If Printer status (2110,0010) is WARNING, the print-job continues to be printed. Table 39 summarizes the behavior of Hardcopy AE when encountering status codes in a N-GET response. Table 39 PRINTER SOP CLASS N-GET RESPON SE STATUS HANDLING BEHAVIOR Service Status Further Meaning Error Code Behavior Success Success 0000 The request to get printer status information was success. * * Any other status code. Same as Timeout above. 4.2.3.3.1.4.2 Printer SOP Class No tifications (N-EVENT-REPORT) Hardcopy AE is capable of receiv ing an N-EVENT-REPORT request at any time during an association. Table 40 summarizes the behavior of Hardcopy AE when receiving Event Types within the N-EVENT-REPORT. Table 40 PRINTER SOP CLASS N-EVEN T-REPORT BEHAVIOUR Event Type Name Event Type ID Behavior Normal 1 The print-job continues to be printed. Warning 2 The print-job. For user-recoverable warnin gs, the job fails and a 1-hour retry period starts, retrying every 20 seconds. Failure 3 The print-job is marked as failed. * * Status code of 0113H Table 41 summarizes the reasons for returning spec ific status codes in a N-EVENT-REPORT response. Table 41 PRINTER SOP CLASS N-EVENT-REPO RT RESPONSE STATUS REASONS Service Status Further Meaning Error Code Reasons Success Success 0000 The notification event has been successfully received. Failure No Such Event Type 0113H An invalid Event Type ID was supplied in the N-EVENT-REPORT request. Failure Processing Failure 0110H An internal error occurred during processing of the N-EVENT-REPORT. A short description of the error will be returned in Error Comment (0000,0902). 4.2.3.3.1.5 SOP Specific Conforman ce for the Film Session SOP Class Hardcopy AE supports the following DIMSE operations for the Film Session SOP Class: — N-CREATE Details of the supported attributes and status hand ling behavior are described in the following subsections. 4.2.3.3.1.5.1 Film Session SOP Class Operations (N-CREATE) Table 42 lists the attributes supplied in an N-CREATE Request.
HD7/HD7XE 3.0 DICOM Conformance Statement 000245000000008 Rev. A Page 36 Table 42 FILM SESSION SOP CLASS N-CREATE REQUEST ATTRIBUTES Attribute Name Tag VR Value Presence of Value Source Number of Copies (2000,0010) IS Default 1. Range is 1 – 99. ALWAYS USER Print Priority (2000,0020) CS HIGH ALWAYS AUTO Medium Type (2000,0030) CS BLUE FILM, CLEAR FILM or PAPER and ‘Printer Specific’ options* ALWAYS USER Film Destination (2000,0040) CS MAGAZINE or PROCESSOR and ‘Printer Specific’ options * ALWAYS USER Film Session Label (2000,0050) LO Philips Medical Systems ALWAYS AUTO *Dependent on the specific printer selected Table 43 summarizes the behavior of Hardcopy AE when encountering status codes in a N-CREATE response. Table 43 FILM SESSION SOP CLASS N-CREATE R ESPONSE STATUS HANDLING BEHAVIOR Service Status Further Meaning Error Code Behavior Success Success 0000 The SCP has completed the operation successfully. Warning Attribute Value Out of Range 0116H System continues operations. Warning Attribute List Error 0107H Same as above. * * Any other status code. The Association is aborted and the print-job fails. 4.2.3.3.1.7 SOP Specific Conformance for the Film Box SOP Class Hardcopy AE supports the following DIMSE operations for the Film Box SOP Class: — N-CREATE — N-ACTION Details of the supported attributes and status hand ling behavior are described in the following subsections. 4.2.3.3.1.7.1 Film Box SOP Class Operations (N-CREATE) Table 47 lists the attributes supplied in an N-CREATE Request. Table 47 FILM BOX SOP CLASS N-CREA TE REQUEST ATTRIBUTES Attribute Name Tag VR Value Presence of Value Source Image Display Format (2010,0010) ST STANDARD\1,1 ALWAYS AUTO Referenced Film Session Sequence (2010,0500) SQ Sequence of Items ALWAYS AUTO
HD7/HD7XE 3.0 DICOM Conformance Statement 000245000000008 Rev. A Page 37 Attribute Name Tag VR Value Presence of Value Source >Referenced SOP Class UID (0008,1150) UI 1.2.840.10008.5.1.1.1 ALWAYS AUTO >Referenced SOP Instance UID (0008,1155) UI From created Film Session SOP Instance ALWAYS AUTO Film Orientation (2010,0040) CS PORTRAIT or LANDSCAPE ALWAYS USER Film Size ID (2010,0050) CS Default – 8INX10IN and DICOM Defined Terms: 8INX10IN, 8_5INX11IN, 10INX12IN, 10INX14IN, 11INX14IN, 11INX17IN, 14INX14IN, 14INX17IN, 24CMX24CM, 24CMX30CM, A4, A3 and ‘Printer Specific’ options. ALWAYS AUTO/USER Magnification Type (2010,0060) CS NONE, CUBIC, BILINEAR, REPLICATE, ‘Printer Specific’ options ANAP USER Border Density (2010-0100) CS Black ANAP USER Empty Image Density (2010,0110) CS Black ANAP USER Min Density (2010,0120) US User editable 0-999 ANAP USER Max Density (2010,0130) US User editable 0-999 ANAP USER Trim (2010,014 0) CS NO ALWAYS AUTO Configuration Information (2010,0150) ST DICOM supports a “config ID#” or a “config string”. Check “Printer Catalog” for appropriate data. ANAP USER Table 48 summarizes the behavior of Hardcopy AE when encountering status codes in a N-CREATE response. Table 48 FILM BOX SOP CLASS N-CREATE RESPONSE STATUS HANDLING BEHAVIOR Service Status Further Meaning Error Code Behavior Success Success 0000 The SCP has completed the operation successfully. Warning Requested Max Density outside of printer’s operating range B605H The N-CREATE operation is considered successful but the status meaning is logged. * * Any other status code. The Association is aborted and the job failed.
HD7/HD7XE 3.0 DICOM Conformance Statement 000245000000008 Rev. A Page 38 4.2.3.3.1.7.2 Film Box SOP Class Operations (N-ACTION) The Hardcopy AE issues an N-ACTION Re quest to instruct the Print SCP to print the contents of the Film Box. Table 49 summarizes the behavior of Hardcopy AE when en countering status codes in an N-ACTION response. Table 49 FILM BOX SOP CLASS N-ACTION RESPONSE STATUS HANDLING BEHAVIOR Service Status Further Meaning Error Code Behavior Success Success 0000 The SCP has completed the operation successfully. The film has been accepted for printing. Warning Film Box SOP Instance hierarchy does not contain Image Box SOP Instances (empty page) B603H The Association is aborted and the job is failed. Failure Unable to create Print Job SOP Instance; print queue is full. C602 Same as B603H above. * * Any other status code. Same as B603H above. 4.2.3.3.1.8 SOP Specific Conforma nce for the Image Box SOP Class Hardcopy AE supports the following DIMSE operations for the Image Box SOP Class: — N-SET Details of the supported attributes and status hand ling behavior are described in the following subsections. 4.2.3.3.1.8.1 Image Box SOP Class Operations (N-SET) Table 50 lists the attributes supplied in an N-SET Request. Table 50 IMAGE BOX SOP CLASS N-SET REQUEST ATTRIBUTES Attribute Name Tag VR Value Presence of Value Source Image Position (2020,0010) US 1 ALWAYS AUTO Polarity (2020,0020) CS NORMAL ALWAYS AUTO Basic Grayscale Image Sequence (2020,0110) SQ Used for BW (Mon ochrome2) print ALWAYS* AUTO Basic Color Image Sequence (2020,0111) SQ Used for Colo r (RGB) print ALWAYS* AUTO >Samples Per Pixel (0028,0002) US 1 for Monochrome2 3 for RGB ALWAYS AUTO >Photometric Interpretation (0028,0004) CS MONOCHROME2 RGB ALWAYS AUTO Planar Configuration (0028,0006) US “01” for Color-by-plane “00” for Color-by-Pixel, Used only for RGB print. ANAP USER >Rows (0028,0010) US Depends on film size, number of rows for entire sheet of film “Default is 2997” ALWAYS See Printer Catalog
HD7/HD7XE 3.0 DICOM Conformance Statement 000245000000008 Rev. A Page 39 >Columns (0028,0011) US Depends on film size, number of columns for entire sheet of film “Default is 2397” ALWAYS See Printer Catalog >Bits Allocated (0028,0100) US 8 ALWAYS AUTO >Bits Stored (0028,0101) US 8 ALWAYS AUTO >High Bit (0028,0102) US 7 ALWAYS AUTO >Pixel Representation (0028,0103) US 0 ALWAYS AUTO >Pixel Data (7FE0,0010) OW Pixels of rendered film sheet. ALWAYS AUTO * Mutually exclusive attributes Table 51 summarizes the behavior of Hardcopy AE w hen encountering status codes in a N-SET response. Table 51 IMAGE BOX SOP CLASS N-SET RESPONSE STATUS HANDLING BEHAVIOR Service Status Further Meaning Error Code Behavior Success Success 0000 The SCP has completed the operation successfully. Failure Insufficient memory in printer to store the image. C605 The Association is aborted and the job is failed. * * Any other status code. Same as C605 above. 4.2.3.4 Association Acceptance Policy The Hardcopy Application Entity does not accept Associations. 4.2.4 Verification Application Entity specification 4.2.4.1 SOP Class HD7/HD7XE 3.0 provide Standard Conformance to the following SOP Class: Table 51.1 SOP CLASSES FOR AE VERIFICATION SOP Class Name SOP Class UID SCU SCP Verification 1.2.840.10008.1.1 Yes Yes 4.2.4.2 Association Establishment Policy 4.2.4.2.1 General The DICOM standard application context name for DICOM 3.0 is always proposed: Table 51.2 DICOM APPLICATION CONTEXT FOR AE VERIFICATION Application Context Name 1.2.840.10008.3.1.1.1 4.2.4.2.2 Number of Associations HD7/HD7XE 3.0 initiate one Association at a time for a Verification request.
HD7/HD7XE 3.0 DICOM Conformance Statement 000245000000008 Rev. A Page 40 Table 51.31 NUMBER OF ASSOCIATIONS INITIATED FOR AE VERIFICATION Maximum number of simultaneous Associations Up to 10, one for each configured remote device Table 51.32 NUMBER OF ASSOCIATIONS ACCEPTED FOR AE VERIFICATION Maximum number of simultaneous Associations Unlimited, however, calling AE must be already configured in HD7/HD7XE 3.0. 51.2.4.2.4 Asynchronous Nature HD7/HD7XE 3.0 do not support asynchronous communication (multiple outstanding transactions over a single Association). Table 51.4 ASYNCHRONOUS NATURE AS A SCU FOR AE VERIFICATION Maximum number of outstanding asynchronous transactions 1 51.2.4.2.4 Implementation Identifying Information The implementation information for this Application Entity is: Table 51.5 DICOM IMPLEMENTATION CLASS AND VERSION FOR AE VERIFICATION Implementation Class UID 1.3.46.670589.14.3000.300 Implementation Version Name HD7_300 4.2.4.3 Association Initiation Policy 4.2.4.3.1 Activity – Verify as SCU and SCP 4.2.4.3.2 Description and Sequencing of Activities SCU: The user can verify the existence of a DICOM server on the hospitals network, through a button in the ‘DICOM Setup’ screen. When the user presses this butt on, HD7/HD7XE 3.0 will initiate the association. Only one association is established for each verification attempt. However, the proposed presentation contexts not only includes the ‘Verification SOP class’ but also include s all the SOP classes that HD7/HD7XE 3.0 could possibly be connected to as Servers. This is done in order to retrieve the capabilities of the remote Server.