Philips Hes2800 User Manual

							12
oZOOM
For pictures or video: zoom in/out. •
pREPEAT A-B 
Repeat a specifi c section within a  •
track/disc.
qREPEAT /PROGRAM 
Selects or turns off repeat or shuffl e  •
mode. 
Program radio stations. •
rSUBTITLE
Select DVD or DivX subtitle language. •
sSURROUND 
Enable/disable Dolby Vir tual Speakers  •
(DVS) sound effect.
t
 +/- 
Adjust volume. •
u
Mute or restore volume. •
vMENU/BACK 
Return to the previous screen. •
For video discs: access or exit the disc  •
menu.
For video discs with playback  •
control(PBC): turn on/off PBC .
wAUDIO 
For VCD, select stereo, mono-left or  •
mono-right channel.
For DVD/DivX video, select an audio  •
language.
EN
 
						

							13
Attach speakers to the main 
unit
Note
Ensure that the colors of the speaker plug and •
terminals are matched.
1  Inser t red plug of right speaker into “ FR”.
2  Inser t white plug of left speaker into “ FL”.
3  Inser t black plug of subwoofer in to “ SW”.
Connect TV
Connect video cables
With this connection, you can watch video from 
the unit on the TV screen.
You can select the best video connection that 
your TV  suppor ts.
Option 1: Connect through HDMI  •
(for a HDMI, DVI or HDCP-compliant 
TV).
Option 2: Connect through composite  •
AV cable and SCART adaptor (for a 
standard TV).
Option 3: connect through  •
component video (for a Progressive 
Scan TV).
FRFLSW
SUBWOOFER
3 Connect
Place the unit
1
  Place the unit near to the TV.
2  Keep the speakers at the normal listening 
ear-level and directly parallel to the 
listening area.
3  Place the subwoofer at the corner of the 
room or at least one meter away from the 
TV.
Note
To avoid magnetic interference or unwanted noise, •
never place this apparatus and speakers too close to 
any radiation devices.
Never place this unit in an enclosed cabinet.
•
Install this unit near the AC outlet where the AC power •
plug can be easily reached.
English
EN
 
						

							14
Option 2: Connect through SCART
1  Connect the black plug of the composite 
AV cable to “ AV OUT” on the unit.
2  Connect other plugs to the SCART 
adaptor, ensure the colors are matched.
3  Connect the SCART adapter to the TV.
Option 3: Connect through 
component video
Connect a progressive scan TV through the 
black composite AV cable (supplied) for higher 
quality video.
Note
The progressive scan video quality is only available •
when a progressive scan TV is connected.
If your TV does not suppor t progressive scan, you 
•
cannot view the picture.
For how to activate progressive scan on your TV, refer 
•
to the TV user manual.
TVSCART IN
Option 1: Connect through HDMI
Connect HDMI (High Defi nition Multimedia 
Interface), DVI (Digital Visual Interface), or 
HDCP (High-bandwidth Digital Contents 
Protection)-compliant TVs through HDMI 
for the best picture quality. This connection 
transmits both video and audio signals. Through 
this connection, you can watch DVDs that 
contain HD (High-Defi nition) content.
Note
Some TVs do not suppor t HDMI audio transmission.•
This connection provides the best video quality.•
1  Connect an HDMI cable (not supplied) to:
the “  •HDMI” socket on this unit.
the HDMI input socket on the TV. •
Note
This unit is HDMI CEC compatible. It enables the •
connected TV/device to control each other over HDMI.
If your TV has only a DVI connection, connect through 
•
a HDMI/DVI adaptor. An extra audio connection is 
needed to complete this connection.
FRFLSW
TV
HDMI IN
EN
 
						

							15
2  Connect the MP3 link cable (not supplied) 
to:
the MP3 LINK socket on the main  •
unit.
the headphone socket on an external  •
device.
3  Star t to play the device (see the device 
user manual). 
For audio players with red/white audio output 
sockets
1 Press  AUX repeatedly to select the AUX 
source.
2  Connect the composite audio cable (not 
supplied) to:
the •AUX socket on the back of the 
main unit.
the AUDIO OUT sockets on an  •
external device.
3  Star t to play the device (see the device 
user manual). 
FRFLSW1  Connect the single side plug of the 
composite AV cable to “  Component “  on 
the unit.
2  Connect other plugs to the TV 
Component Video Input sockets (yellow 
plug to green socket, red plug to blue 
socket, white plug to red socket). 
Connect audio cables
You can listen to audio players through this unit.
For audio players with headphone sockets
1 Press  MP3 LINK repeatedly to select the 
MP3 link source.
TV
English
EN
 
						

							16
2  Connect the other end to the wall outlet.
FRFLSW
b
c
Connect FM antenna
Note
This unit does not suppor t MW radio reception.•
1  Connect the supplied FM antenna to the 
“FM ANT” socket on the unit.
Connect power
Caution
Risk of product damage! Ensure that the power supply •
voltage corresponds to the voltage printed on the back 
or the underside of the product.
Risk of electric shock! When you unplug the AC power, 
•
always pull the plug from the socket. Never pull the 
cord.
Note
Before connecting AC power, ensure you have •
completed all other connections.
1  Connect one end of the power plug to the 
“DC IN” socket on the main unit.
FRFLSW
FM ANT
EN
 
						

							17
Switch to standby mode
Press to turn on the unit.
Letters is displayed under 2 different standby 
modes:
Mode  Normal Standby  Low 
Power
Turn on  [POWER ON] [PHILIPS]
Turn off  [NORMAL
STANDBY][Low 
Power]
Find the correct viewing 
channel
1
 Press  DISC to switch to disc mode.
2  Press the source button repeatedly on the 
remote control of your TV.
Tip
The video-in channel may be called AV, VIDEO, HDMI •
etc. See the TV user manual on how to select the 
correct input on the TV.
3
1
2
4 Get started
Caution
Use of controls or adjustments or performance of •
procedures other than herein may result in hazardous 
radiation exposure or other unsafe operation.
Always follow the instructions in this chapter in 
sequence.
If you contact Philips, you will be asked for the 
model and serial number of this apparatus. The 
model number and serial number are on the 
back of the apparatus. Write the numbers here: 
Model No. __________________________
Serial No. ___________________________
Prepare the remote control
Caution
Risk of explosion! Keep batteries away from heat, •
sunshine or fi re. Never discard batteries in fi re.
Risk of decreased batter y life! Never mix different 
•
brands or types of batteries.
Risk of product damage! When the remote control is 
•
not used for long periods, remove the batteries.
Note
Perchlorate Material - special handling may apply. See •
www.dtsc.ca.gov/hazardouswaste/perchlorate.
1  Open the batter y compar tment.
2  Inser t two R03 or AAA batteries with 
correct polarity (+/-) as indicated.
3  Close the batter y compar tment.
English
EN
 
						

							18
4 Press  DISC.
5 Press   OPTIONS.
6 Press  / to select[Video Setup] in the 
menu, then press  
.
7 Select  [Progressive] >[On], then press 
OK.
A warning message is displayed. »
8  To proceed, select  [Ok] and pressOK.
The progressive setup is complete. »
Note
If a blank/distor ted screen is displayed, wait for 15 •
seconds for auto recover y or turn off progressive scan 
manually.
9  Turn on the progressive scan mode on the 
TV.
Turn off progressive scan manually
1  Turn off the progressive scan mode on the 
TV.
2 Press   OPTIONS.
3 Press  / to select[Video Setup] in the 
menu, then press  
.
4 Select  [Progressive] >[Off], then press 
OK.
5  To exit the menu, press   OPTIONS.
Select the correct TV system
Change this setting if the video does not appear 
correctly. By default, this setting matches the 
most common setting for TVs in your countr y.
1 Press   OPTIONS.
2 Select  [Video Setup].
3 Select  [TV Type] and then press.
4  Select a setting and then press  OK.
•[PAL] - For TV with PAL color system.
•[NTSC] - For TV with NTSC color 
system. 
•[Multi] - For TV that is compatible 
with both PAL and NTSC .
5  To exit the menu, press   OPTIONS.
Select menu display language
1
 Press   OPTIONS.
2 Select  [General Setup].
3 Select  [OSD Language] and then press.
4  Select a setting and then press  OK.
5  To exit the menu, press   OPTIONS.
Turn on Progressive Scan
Progressive scan displays twice the number of 
frames per seconds than interlaced scanning 
(ordinar y TV system). With nearly double the 
number of lines, progressive scan offers higher 
picture resolution and quality.
Before you turn on this feature, ensure that:
The TV suppor ts progressive scan  •
signals.
You have connected this unit with the  •
TV through component video.
1  Turn on the TV.
2  Ensure that the TV progressive scan mode 
is deactivated (see the TV user manual).
3  Switch the TV to the correct viewing 
channel for this unit.
EN
 
						

							19
To return to the menu during play:
1 Press  MENU/BACK.
Note
To see the disc menu of a VCD disc, you must turn on •
PlayBack Control (PBC) feature of the disc.
Select an audio language
You can select an audio language on DVDs, 
DiVx video or VCDs.
1  During disc play, press  AUDIO.
The language options appear. If the  »
selected audio channels is unavailable, 
the default disc audio channel is used.
Note
For some DVDs, the language can only be changed •
from the disc menu. Press  MENU/BACK to access the 
menu.
Select a subtitle language
You can select a subtitle language on DVDs or 
DivX® Ultra discs.
During play, press   •SUBTITLE.
Tip
For some DVDs, the language can only be changed •
from the disc menu. Press  MENU/BACK to access the 
menu.
Sync audio output with video play
If the video play is slower than the audio output 
(sound does not match with the pictures), you 
can delay the audio output to match the video.
1  Press and hold  AUDIO SYNC until 
‘AUDIO SYNC XXX’ is displayed.
‘XXX’ denotes the delay time. »
5 Play
Note
With some disc/fi le types, play may differ.•
Play discs
Caution
Never look at the laser beam inside the unit.•
Risk of product damage! Never play discs with •
accessories such as disc stabilizer rings or disc 
treatment sheets. 
Never put any objects other than discs into the disc 
•
compar tment.
1 Press  DISC to select the DISC source.
2 Press   on the main set to open the disc 
compar tment.
3  Place a disc into the disc compar tment and 
press
.
Ensure that the label faces outwards. »
4  Play star ts automatically.
To stop play, press   •
.
To pause or resume play, press   •
.
To skip to the previous/next title/ •
chapter/track, press  
/.
If play does not start automatically:
Select a title/chapter/track and then press  •
.
Tip
To play a locked DVD, enter the 4-digit parental control •
password.
Use the disc menu
When you load a DVD/(S)VCD disc, a menu 
may be displayed on the TV screen.
English
EN
 
						

							20
2  Select a source:
For discs, press   •DISC.
For USB devices, press   •USB.
3  Select a title to play, then press  .
To stop play, press   •
.
To pause or resume play, press   •
.
To change a subtitle language, press  •
SUBTITLE.
Note
You can only play DivX videos rented or purchased •
through the DivX registration code of this unit.
Subtitle fi les with the following fi lename extensions (.sr t, 
•
.smi, .sub, .ssa, .ass) are suppor ted but do not appear on 
the fi le navigation menu.
The subtitle fi lename has to be the same as the fi le 
•
name of the video.
Play MP3/WMA/picture fi les
You can play MP3/WMA/picture fi les copied 
onto a CD-R/RW, recordable DVD or USB 
device.
1  Inser t a disc or connect a USB device.
2  Select a source:
For discs, press   •DISC.
For USB devices, press   •USB.
A contents menu is displayed. •
3  Select a folder, then press  OK.
4  Select a fi le to play, then press  .
To return to the main menu, press   •
until the ‘Previous’ folder is selected, 
then pressOK.
To stop play, press   •
.
To pause or resume play, press   •
.
To skip to the previous/next fi le, press  •
/.
2  Within fi ve seconds, press   +/- to set 
the delay time for audio output.
Play from USB
Note
Ensure that the USB device contains playable music, •
pictures or video.
1  Plug the USB device to the   socket.
2 Press  USB to select the USB source.
A contents menu is displayed. »
3  Select a folder, then press  OK.
4  Select a fi le to play, then press  .
To return to the main menu, press   •
until the ‘Previous’ folder is selected, 
then pressOK.
To stop play, press   •
.
To pause or resume play, press   •
.
To skip to the previous/next fi le, press  •
/.
Play DivX video
You can play DivX fi les copied onto a CD-R/
RW, recordable DVD or USB device.
1  Inser t a disc or connect a USB device.
EN
 
						

							21
To cancel resume mode and stop play 
completely:
1  In stop mode, press  .
Play options
Display play information
1  During play, press   INFO repeatedly to 
display play information.
Zoom in/out image
1  During video/picture play, press  ZOOM
repeatedly to zoom in/out the image.
When the image is zoomed in, you  •
can press
/// to pan through 
the image.
Change the audio channel
Note
This feature is only available for VCD/DivX play.•
1  During play, press  AUDIO repeatedly to 
select an audio channel available on the 
disc:
Mono Left •
Mono Right •
Stereo •
Select an audio language
Note
This feature is only available for DVDs/DivX videos •
recorded with multiple audio languages.
1 Press  AUDIO repeatedly to select an 
audio language.
Play control
Select repeat/shuffl e play options
1  During play, press  REPEAT/PROGRAM
repeatedly to select a repeat option or the 
shuffl e play mode.
To resume normal play, press  •
REPEAT/PROGRAM repeatedly until 
[Repeat Off] is displayed.
Repeat A-B  (DVD/VCD/CD/MP3/
WMA)
1  During music or video play, press  REPEAT 
A-B at the star t point.
2 Press  REPEAT A-B at the end point.
The selected section star ts to play  »
repeatedly.
To cancel repeat play, press   •REPEAT 
A-B again.
Note
The section A and B can be set only within the same •
track/title.
Search forward/backward
1  During play, press  / ( /) repeatedly 
to select a search speed.
To resume play at normal speed, press  •
.
Resume video play from last stopped 
point
Note
This feature is only available for video play. •
1  In stop mode and when the disc has not 
been removed, press  OK.
English
EN