Philips Hts3115 User Manual

							31
English
Playing from USB fl ash drive 
or USB memory card reader
This DVD system is able to access and 
view the data fi les (JPEG, MP3 or 
Windows Media™ Audio) in the USB 
fl ash drive or USB memory card reader. 
Editing and copying the data are not 
possible.
A Insert a USB fl ash drive or USB memory 
card reader into the USB port on the 
front panel. 
B A message will appear on the TV for 5 
(fi ve) seconds when the device is 
detected.
Press DISC/USB to select device
C Press DISC/USB on the remote control 
to access the data in the drive. 

						

							32
English
Audio Setup Page
Speakers Volume
Speakers Delay
Night Mode
HDMI Audio
CD Upsampling
Lip Sync
General Setup Page
Disc Lock
Display Dim
Program
OSD Language
Screen Saver
DivX(R) VOD Code
Video Setup Page
TV Type
TV Display
Picture Setting
HDMI Setup
DVD Setup Menu Options
Preference Page
Audio
Subtitle
Disc Menu
PBC
MP3/JPEG Nav
Password
DivX Subtitle
Default
Accessing the DVD setup 
menu
This DVD system setup is carried out via 
the TV, enabling you to customise the 
DVD system to suit your particular 
requirements. 
SETUPOK
A In ‘DISC’ mode, press SETUP on the 
remote control.

						

							33
English
General Setup Page (underlined options are the factory default settings)
Disc Lock  Not all discs are rated or coded by the disc maker.  You can 
prevent a specifi c disc from playing by locking the disc.  Up to 40 
discs can be locked.
{ Lock }  –  Selects this to block the playback of the 
current disc.  Subsequent access to a locked 
disc requires a six-digit password.  The 
default password is ‘136900’ (see ‘Preference 
Setup Page - { Password }).
{ Unlock }  –  All discs can be played.
Display Dim  Selects the brightness of the DVD system display panel.
{ 100% }  –  Full brightness.
{ 70% }  –  Medium brightness.
{ 40% }  –  Dimmest display.
Program  Access the track programming menu.  See ‘Programming disc 
tracks’ chapter.
OSD language  Selects the preferred language for the DVD system on-screen 
display menu.
Screen Saver  The screen saver will help prevent damage to your TV display 
device.
{ On }  –  Turns off the TV to screen saver mode when 
playback has been stopped or paused for 
more than 15 minutes.
{ Off }  –  Turns off the screen saver function.
DivX(R) VOD code  Philips provides you with the DivX® VOD (Video On Demand) 
registration code that allows you to rent and purchase videos 
using the DivX® VOD service.  Press X to see the registration 
code and press OK to exit.
  Use the registration code to purchase or rent the videos from 
DivX® VOD service at www.divx.com/vod.  Follow the 
instructions and copy the video from your computer onto a 
CD-R/RW disc for playback on this DVD system. 
Note:  All the downloaded videos from DivX® VOD can only be played 
back on this DVD system.  For more information, visit us at www.divx.
com/vod.
DVD Setup Menu Options (continued)
 
						

							34
EnglishAudio Setup Page (underlined options are the factory default settings)
Speakers Volume  Access the speaker’s level setup menu.  Use W X keys to adjust 
the volume level for each connected speaker between -6dB to 
+6dB.  
Speakers Delay  Access the speaker’s distance setup menu.  Use W X keys to set 
the delay times for the centre and rear speakers based on the 
listening position and distance.
Note:  1 ms increase/decrease of delay time is equivalent to 30 cm 
change in distance.  Use the longer delay time settings when the rear 
speakers are closer to the listener than the front speakers.
Night Mode  This mode optimises playback of sound at low volume.  High 
volume outputs will be softened and low volume outputs will be 
enhanced to an audible level.  This feature is only applicable for 
DVD video discs with Dolby Digital mode.
{ On }  –  Turns on night mode.
{  Off }  –  Turns off night mode feature. Selects this to 
enjoy the surround sound with its full 
dynamic range.
HDMI Audio  This setting is only required if you are using the DVD system’s 
HDMI OUT socket to connect your TV or other display device 
(see ‘Option 2: Connecting to a HDMI-compatible TV’).  
 Note:  It may take a while for the DVD system and the input device to 
communicate and initialise.
{ Off }  –  Select this if the playback audio format is not 
supported by HDMI connection (e.g. 
projector, SACD).  It will turn off the HDMI 
audio output.
{ PCM }  –  Select this to downmix the audio signals to 
linear-PCM (2-channel). 
{ All }  –  Select this to enjoy the multi-channel audio 
output through the HDMI connection.  
Note:  It is not possible to listen to SACDs or copy-controlled DVD-
Audio CPPM (Content Protection for Playable Media) sources using the 
HDMI connection.
DVD Setup Menu Options (continued)
 
						

							35
EnglishCD Upsampling  This feature enables you to convert your music CD to a higher 
sampling rate using sophisticated digital signal processing for 
better sound quality.  If you have activated the CD upsampling 
feature, the system will automatically switch to stereo mode.
{ Off }  –  Turns off CD-upsampling.
{  88.2 kHz (X2) }  –  Select this to convert the sampling rate of 
the CDs twice as high as the original rate.
Note:  If you press the SURR button on the remote control to select 
multi-channel mode, it will turn off the CD upsampling feature.
Lip Sync  This feature allows you to delay the sound output in order to 
synchronise it with the video playback.  This may be necessary 
when you use certain LCD monitors or projectors.
  Access the lip sync setup menu.  Use W X keys to set the delay 
times (0 ~ 200 ms) for the audio output.
Audio Setup Page (underlined options are the factory default settings)
DVD Setup Menu Options (continued)
 
						

							36
EnglishVideo Setup Page (underlined options are the factory default settings)
TV Type  Selects the colour system that matches the connected TV.  It will 
enable playback of a different type of disc (PAL or NTSC disc) on 
this DVD system.
{ PAL }  –  For PAL-system TV.
{ NTSC }  –  For NTSC-system TV.
{ Multi }  –  For TV that is compatible with both PAL and 
NTSC.
TV Display  The picture shape can be adjusted to fi t your TV. 
{ 4:3 Letter Box } – For a ‘wide-screen’ display 
with black bars on the top and 
bottom.
{ 4:3 Pan Scan } –  For a full-height picture with the 
sides trimmed.
{ 16:9 Wide Screen } – For wide-screen TV 
(frame ratio 16:9). 
Picture Setting  This DVD system provides three predefi ned sets of picture 
colour settings and one personal setting which you can defi ne 
yourself. 
{ Standard }  –  Original colour setting.  
{  Bright }  –  Vibrant colour setting.
{ Soft }  –  Warm colour setting.
{ Personal }  –  Selects this to personalise your picture colour 
setting.  Use W X keys to adjust to the 
setting that best suits your personal 
preference and press OK to confi rm.  For an 
average setting, select { 0. }
{ Brightness }  
Increase this value to brighten the picture colour 
or vice versa. 
{ Contrast }
 Increase this value to sharpen the picture colour or 
vice versa.  
{ Tint }
Increase or decrease this value to change the 
colour phase of the picture.  
{ Color }
Increase this value to enhance the picture colour 
or vice versa. 
Brightness
Contrast
Tint
ColorPersonal Picture Setup
DVD Setup Menu Options (continued)
 
						

							37
English
DVD Setup Menu Options (continued)
HDMI Setup   It provides the picture settings to enhance the appearance and 
picture quality for disc playback.  This feature is only applicable if 
you have connected this DVD system to a HDMI-compatible TV/
device.
{ HDMI Video }–  Selects a suitable video resolution depending 
on the capability of the connected TV/device 
to further enhance the HDMI video output.
{ 480p }
Progressive output in 480 lines for NTSC TV.
{ 576p }
Progressive output in 576 lines for PAL TV.
{ 720p } - (if a HDMI TV is connected)
Progressive output upscale to 720 lines.
{ 1080i } - (if a HDMI TV is connected)
Interlaced output upscale to 1080 lines. 
{ Auto } 
The video output will automatically follow the 
display’s supported resolution.
Note:  If no display appears on the TV due to unsupported resolution, 
use the composite video cable to connect the DVD system and your TV. 
Turn on your TV to the correct input channel for the composite video 
and adjust the resolution setting to 480p/576p.
  { Wide Screen Format } – Selects a suitable screen display. 
This feature is only available if you have 
selected { TV Display - 16:9 Wide Screen }.
{ Superwide }  
Selects this to display the 4:3 picture disc on the 
wide-screen TV with non-linear stretching (centre 
position of the screen is stretched less than the 
side).
{ 4:3 Pillar Box }
Selects this to display 4:3 picture disc on the wide-
screen TV without stretching.  Black bars will be 
shown on the both sides of the TV screen. 
{ Off }
No aspect ratio adjustment is made when this 
option is selected.
Note:  The { Wide Screen Format } feature will be disabled if your 
HDMI TV has been preset to { 480p } or { 576p } settings.
Video Setup Page (underlined options are the factory default settings)
 
						

							38
EnglishPreference Setup Page (underlined options are the factory default settings)
Audio  Selects the preferred audio language for DVD playback.  
Subtitle  Selects the preferred subtitle language for DVD playback.
Disc Menu  Selects the preferred disc menu language for DVD playback.
Note:  If the selected audio/subtitle/disc menu language is not available 
on the DVD, the disc’s default language will be used instead.
PBC  Play Back Control feature is applicable for VCD/SVCD only.  It 
allows you to play Video CDs (2.0) interactively, following the 
menu on the display.  
{ On }   –  The index menu (if available) will appear on 
the TV when you load a VCD/SVCD.
{ Off }   –  The VCD/SVCD will skip the index menu and 
playback directly from the beginning.
MP3/JPEG Nav  MP3/JPEG Navigator can only be set if the disc is recorded with a 
menu.  It allows you to select different display menus for easy 
navigation.
{ Without Menu}  – Displays all the fi les contained in the MP3/
Picture disc.
{ With Menu }  –  Displays the folder menu of the MP3/Picture 
disc.
Note:  This DVD system can only display 648 fi les/folder in the directory.
Password  The password is used for the Disc Lock.  Enter your six-digit 
password to play a locked disc or when prompted for a 
password.  The default password is ‘136900’.  To change the 
password:
1) Press OK to access the change password menu.
2) Use the numeric keypad 0-9 on the remote control to 
enter your existing six-digit password at { Old Password }.
Note:  When doing this for the fi rst time or if you forget your existing  
password, key in ‘136900’.
3)  Enter the new six-digit password at { New Password }.
4)  Enter the new six-digit password again at { Confi rm PWD }.
5) Press OK to confi rm and exit the menu.
 
DVD Setup Menu Options (continued)
Change Password
Old Password
New Password
Confirm PWD
OK
 
						

							39
English
Preference Setup Page (underlined options are the factory default settings)
DivX Subtitle  Selects the font type that supports the recorded DivX subtitle.
{ Standard }   –  Displays a standard list of Roman subtitle 
fonts provided by this DVD system.
{ Others }   –  Displays other subtitle fonts.
Default  This feature enables you to reset all the setup menu options and 
your personal settings to the factory defaults, except your 
password for the Disc Lock.  Press OK to confi rm the default 
reset.
DVD Setup Menu Options (continued)
 
						

							40
English
Tu n e r  O p e r a t i o n s
IMPORTANT!
Make sure the FM and MW 
antennas are connected.
Tuning to radio stations
A Press SOURCE repeatedly until “FM” 
appears on the display panel (or press 
TUNER on the remote control).
B Press W / X briefl y on the remote 
control to start tuning.