Philips Hts3270 User Manual

11
   
Place the Home Theater 
System
   
 
 
Place the Home Theater System where it  • 
cannot be pushed, pulled over or knocked 
down. Do not place it in an enclosed 
cabinet.
   
 
 
Be sure that you have full access to the  • 
power cord for easy disconnection of the 
Home Theater System from the power 
supply.
   
 
 
 
  
 
 
 
 
Wireless receiver is for HTS3377 W only.
   
Different set of speakers for HTS3270. (see 
‘Speci cations’ > ‘Speakers’).
    
 
 
 
 
 
1  Place this Home Theater System...

12
   
 
 
 
Option 2: Connect to the HDMI jack
 
 
 
 
 
 
 
1  Connect an HDMI cable (not supplied) 
to the  HDMI OUT 
 jack on this Home 
Theater System and the HDMI input jack 
on the T V.
  Note
 
If your device suppor ts HDMI CEC , you can control   •
compliant devices with a single remote control. (see 
‘Get star ted’ > ‘ Use Philips EasyLink ’).
  Tip
 
If the T V has a DVI connec tion only, connec t via   •
a HDMI/DVI adaptor. Connec t an audio cable for 
sound output.
   
You can optimise the...

13
Connect speaker cables to 
speakers
   
 
For the rear speakers of HTS3377 and 
HTS3377W only
   
 
 
  
 
 
 
 
1  Connect the speaker cables to the 
matching color jacks on the speakers (or 
speaker stands).
   
 
 
 
 
 
 
Connect speaker to speaker 
stand
   
 
For the rear speakers of HTS3377 and 
HTS3377W only
   
 
  
 
 
 
1  Attach the speakers to the speaker stands 
and secure the position with screws.
   
 
 
 
 
 
 
 
 
 
 
Option 3: Connect to the Video 
(CVBS) jack
   
 
 
 
 
 
1...

14
For HTS3270 and HTS3377 (HTS3270 has a 
different set of speakers)
   
 
 
  
 
 
 
 
 
 
1  Connect the speakers and subwoofer to 
the matching jacks on the Home Theater 
System.
  Note
 
Ensure that the color s of the plugs and jack s are   •
matched.
Connect speakers and 
subwoofer
   
 
For HTS3377 W only
 
 
 
 
  
 
 
 
 
EN
1_hts3270-3377-3377W_12_en3.indd   142009-03-30   11:43:24 AM
 

15
Connect radio antenna
   
 
  
 
 
 
 
 
 
1  Connect the FM antenna to the  FM75 
  
 
jack on this Home Theater System 
(for some models, this cable is already 
connected).
   
 
 
2  Ex tend the FM antenna and  x its ends to 
the wall.
  Tip
 
For bet ter FM stereo reception, connec t to an   •
ex ternal FM antenna.
FM (75 Ω) 
ANTENNA
   
 
 
 
 
Connect rear speakers to 
wireless receiver
   
 
For the rear speakers of HTS3377W only
 
 
 
 
  
 
 
 
 
 
 
1  Connect the rear lef t and right...

16
Connect audio from cable box/
recorder/game console
   
You can choose to connect to analog or digital 
jack depending on the device capabilities.
   
  
 
 
 
Connect to analog jacks 
 
 
  
 
 
 
 
1  Connect the audio cables (not supplied) 
to the  AUDIO IN-AUX 
 jacks on the 
Home Theater System and the AUDIO 
output jacks on the device. 
  Note
 
To listen to the audio output from this connec tion,   •
press  AUDIO SOURCE 
 repeatedly until ‘AUX’ is 
displayed on the display panel.
   
 
AUDIO...

17
Connect to optical jack 
 
 
  
 
 
 
 
1  Connect an optical cable (not supplied) 
to the  OPTICAL DIGITAL-IN 
 jack 
on the Home Theater System and the 
OPTICAL /SPDIF output jack on the 
device.
  Note
 
To listen to the audio output from this connec tion,   •
press  AUDIO SOURCE 
 repeatedly until ‘OPTI IN’ is 
displayed on the display panel.
DIGITAL INOPTICAL
DIGITAL OUTOPTICAL
Connect to coaxial jack  
 
 
  
 
 
 
 
1  Connect a coaxial cable (not supplied) 
to the  COA XIAL DIGITAL-IN 
 jack...

18
Connect power cord
  Warning
 
Risk of produc t damage! Ensure that the power   •
supply voltage corresponds to the voltage printed 
on the back or the under side of the Home Theater 
System.
   
 
 
1  Connect the power cords from the 
Home Theater System, wireless receiver 
and other devices to the power outlets 
when all the required connections are 
done.
   
 
 
The wireless indicator on the wireless    »
receiver light up. (Only applicable for 
HTS3377W)
   
 
 
The Home Theater System is ready...

19
Control a play source
   
 
 
1 Press   
 
RADIO 
,  USB 
 or  DISC 
 button to 
select the source you wish to control.
   
 
 
2  Select the desired function (for example  
 
,   
). 
 
 
 
 
 
 
 
Navigate through the menu
 
 
  
 
 
 
 
1  Point the remote control directly at the 
remote sensor on the Home Theater 
System and select the desired function.
   
 
 
2  Press the following buttons on the 
remote control to navigate through the 
on-screen menus.
  Button  Action
 
  
  
Move up or down...

20
   
 
 
 
Select menu display language
 
Note
 
Skip this set ting if this Home Theater System is   •
connec ted to a HDMI CEC compliant T V. It switches 
automatically to the same OSD menu language as 
per your T V set ting.
   
 
  
 
 
 
 
 
 
1 Press  DISC 
.
 
 
 
 
2 Press   
 
 SETUP 
.
   
 
 
    »[General Setup] 
 menu is displayed.
 
 
 
 
 
 
3 Press   
.
 
 
 
 
4 Press   
  
 to select  [OSD Language] 
 in 
the menu, then press  
  .
   
 
 
The language options are different  •...