Philips Hts3274 User Manual

11
   
 
 
 
 
Connect speakers and 
subwoofer
   
 
 
 
 
 
 
 
 
1  Connect the speakers and subwoofer to 
the matching jacks on this Home Theater 
System.
  Note
 
Ensure that the colors of the plugs and jacks   •are matched.
 
 
 
 
 
Option 3: Connect to the Video 
(CVBS) jack
   
 
 
 
 
 
1  Connect a composite video cable to 
the  VIDEO 
 jack on this Home Theater 
System and the VIDEO input jack on the 
TV.
  Note
 
The video input jack on the T V might be   •labeled as  A/V IN 
,  VIDEO IN 
,...

12
   
 
 
 
 
Connect audio cables/other 
devices
   
Route the audio from other devices to this 
Home Theater System to enjoy audio play with 
multi-channel surround capabilities.
   
 
 
Connect audio from TV
 
 
(also used for EasyLink control)
 
 
 
 
 
 
 
1  Connect the audio cables (not supplied) 
to the  AUDIO IN-AUX1 
 jacks on this 
Home Theater System and the AUDIO 
output jacks on the T V. 
  Note
 
To listen to the audio output from this   •connection, press  AUDIO SOURCE 
 
repeatedly...

13
   
 
Connect to coaxial jack  
 
 
  
 
 
 
 
1  Connect a coaxial cable (not supplied) 
to the  DIGITAL-IN-COAXIAL 
 jack 
on this Home Theater System and the 
COA XIAL /DIGITAL output jack on the 
device.
  Note
 
To listen to the audio output from this   •connection, press  AUDIO SOURCE 
 repeatedly 
until ‘COA X IN’ is displayed on the display panel.
   
  
 
 
 
Connect to optical jack 
 
 
  
 
 
 
 
1  Connect an optical cable (not supplied) 
to the  DIGITAL-IN 
- OPTICAL  
jack 
on this Home...

14
   
 
 
 
Connect USB device
 
 
 
 
 
 
 
1  Connect the USB device to   
 
 
 
USB 
 jack 
on this Home Theater System.
  Note
 
This Home Theater System can only play/view   •MP3, WMA, DivX (Ultra) or JPEG fi les that are 
stored on such devices.
   
Press  
  •USB 
 to access the content and play the 
fi les.
 
 
 
 
 
 
Connect power cord
 
Warning
 
Risk of product damage! Ensure that the   •power supply voltage corresponds to the 
voltage printed on the back or the underside 
of the product....

15
   
 
 
 
 
 
Navigate through the menu
 
 
  
 
 
 
 
1  Point the remote control directly at the 
remote sensor on the Home Theater 
System and select the desired function.
   
 
 
2  Press the following buttons on the 
remote control to navigate through the 
on-screen menus.
  Button  Action
 
  
  
Move up or down
   
 
Move lef t or right
   
OK 
Confi rm a selection
 
 
 
Enter numbers
 
 
 
 
 
 
Find the correct viewing 
channel
   
 
 
1 Press   
 to turn on this product.
 
 
 
 
2 Press  DISC...

16
  Tip
 
You can set the default language for DVD disc   •menu (see ‘Adjust set tings’ > ‘Preferences’ > 
  [Disc Menu] 
).
 
 
 
 
 
 
Turn on Progressive Scan
 
 
If the TV suppor ts progressive scan output, you 
can connect this Home Theater System and the 
TV using component video connection. (see 
‘Connect video cables’ > ‘Option 2: Connect to 
the component video jack’).
   
 
  
 
 
 
 
 
 
1  Turn on the T V and ensure that the T V 
progressive scan mode is deactivated (see 
the T V user...

17
   
 
 
 
 
 
To set the speakers level 
 
 
 
 
1 Select  [Speakers Volume] 
 in the menu, 
then press  
  .
 
 
  
 
 
 
 
2 Press   
  
 to change the volume level, 
then press  OK 
.
   
 
 
The test tone is emitted from the    »
speaker.
   
 
 
 
 
 
 
Repeat the above setting for other  • 
speakers until all the speakers output 
level sounds equally balance.
   
 
 
To exit the menu, press   • 
 
 
 SETUP 
.
 
 
  
 
 
 
 
 
To set the output delay time (center and rear 
speakers only)...

18
   
One-touch standby 
   
When you connect your product to devices 
that suppor t one-touch standby, you can use 
your product remote control to switch your 
product and all connected HDMI devices to 
standby mode. You can per form one-touch 
standby using the remote control from any of 
the connected HDMI devices.
   
System audio control 
   
When you connect your product to HDMI 
CEC compliant devices, your product can 
switch automatically to play audio from the 
connected device. 
   
To use...

19
   
 
 
 
 
 
 
Select a play source
 
 
 
On the main unit 
 
 
  
 
 
 
 
Press   • SOURCE 
 button repeatedly to 
select:  DISC 
 >  USB 
 
 >  
 
FM 
 >  
 
AUX 1 
 
 > 
   
AUX 2 
 
 >  
 
COA X IN 
 
 
>  OPTI IN 
 >  MP3 
LINK 
 >  DISC 
 ...
 
 
 
 
  
 
 
 
 
 
On the remote control 
 
 
  
 
 
 
 
Press   • AUDIO SOURCE 
 repeatedly to 
switch to the connected audio source:
   
Display   
Device connected to
 
 
AUX 1 
AUDIO IN-AUX1 jacks
   
AUX 2 
AUDIO IN-AUX2 jacks
   
COA X IN 
DIGITAL...

20
   
 
 
 
 
Play video
 
Note
 
For video disc, playback always resumes from   •the point where it was last stopped. To star t 
play from the beginning, press     while the 
message is displayed.
   
 
 
Control video play
 
 
 
 
1  Play a title.
 
 
 
 
2  Use the remote control to control the 
title. 
  Button  Action
 
  
Star ts, pauses or resumes 
playback.
   
 
Stops play.
   
 
Skips to the nex t title or chapter.
   
 
Skips to the beginning of the 
current title or chapter. Press 
twice to...