Philips Hts3300 User Manual

English
11
3139 115 2xxx1
Basic Connections (continued)
1Connect the supplied MW loop antenna
to the MW socket.  Place the MW loop
antenna on a shelf, or attach it to a stand
or wall.
2Connect the supplied FM antenna to the
FM socket.  Extend the FM antenna and
fix its ends to the wall.
For better FM stereo reception, connect
an external FM antenna (not supplied).
Helpful Hints:
– Adjust the position of the antennas for
optimal reception.
– Position the antennas as far as possible
from your TV, VCR or...

12
3139 115 2xxx1
English
Connection to External Devices
Connecting a audio/video
device
L
R
AUDIO OUT
Audio/Video
Device
DVD System
You can connect other audio/video device
to the DVD system in order to use the
Home Theatre Audio System’s surround
sound capabilities.
Use an audio cable (red/white, not
supplied) to connect the DVD system’s
AUX IN (R/L) sockets to the AUDIO
OUT sockets on the audio/video device.
To listen to the sound, press AUX/DI to
select “AUX” as the source to play.
Helpful Hint:
–...

English
13
3139 115 2xxx1
Main Unit
1STANDBY ON (B)
– Switches to Eco Power standby mode, or
turns on the system.
2Disc tray
3OPEN CLOSE 0
– Opens/Closes the disc tray.
4 ECO POWER indicator
– Lights up when in Eco Power standby
mode.
5iR
– Point the remote control towards this
sensor.
6System display panel
7VOLUME
– Adjusts the volume level.
123647
890!
5
8SOURCE
– Selects the relevant active source mode:
DISC, TUNER  (FM/MW), TV  or AUX.
9ÉÅ PLAY/PAUSE
– DISC: starts/pauses playback.
– TUNER: starts...

14
3139 115 2xxx1
English
Remote Control
* = Press and hold the button for more than two seconds.
1
2
3
4
5
6
7
8
9
0
!
1B
– Switches to Eco Power standby mode, or
turns on the system.
2VOL +-
– Adjusts the volume level.
31 2 3 4
– DISC: selects movement direction in the
menu.
– TUNER: use  3 4 to start auto searching,
use 1 2 to tune the radio frequency up/
down.
4S  /  T
– DISC: *searches backward/forward or
selects a track.
– TUNER: selects a preset radio station.
5PAUSE Å
– DISC: pauses playback....

English
15
3139 115 2xxx1
Remote Control (continued)
* = Press and hold the button for more than two seconds.
@Numeric Keypad (0-9)
– DISC: enters a track/title number.
– TUNER: enters the preset radio station
number.
#DISC MENU
– DISC: enters or exits disc contents menu.
For VCD, selects various preview
function.
$DISPLAY
– DISC: displays the current status or disc
information.
%OK
– Confirms a selection.
^PLAYÉ
– DISC: starts playback.
&STOPÇ
– Exits an operation.
– DISC: stops playback.
– DISC:...

16
3139 115 2xxx1
English
Getting Started
Step 1:Inserting batteries into
the remote control
1
3
2
1Open the battery compartment.
2Insert two batteries type R06 or AA,
following the indications (+-) inside
the compartment.
3Close the cover.
CAUTION!
–Remove batteries if they are
exhausted or if the remote control
is not to be used for a long time.
–Do not use old and new, or
different types of batteries in
combination.
–Batteries contain hazardous
chemical substances, so they should
be disposed of...

English
17
3139 115 2xxx1
Getting Started (continued)
Selecting the matching colour
system
The colour system of the DVD system,
DVD and TV should match. Only then will
it be possible to play a DVD on this
system.  Before changing the TV system,
determine the colour system of your TV.
1In disc mode, press SETUP.
2Press 2 repeatedly to select { Video Setup
Page }.
3Press 34 to highlight { TV Type }, then
press 2.
Video Setup Page
TV Type
TV Display
Picture SettingPAL
NTSC
Multi
4Press 34 to highlight one...

18
3139 115 2xxx1
English
Getting Started (continued)
Step 4: Setting language
preferences
You can select your preferred language
settings so that this DVD system will
automatically switch to the language for
you whenever you load a disc.  If the
language selected is not available on the
disc, the disc’s default language will be
used instead.
The OSD (On-Screen Display) language
for the system menu will remain as you
set it, regardless of the default and
optional disc languages.
On-screen display (OSD)...

English
19
3139 115 2xxx1
Disc Operations
IMPORTANT!
–If the inhibit icon (ø or X) appears
on the TV screen when a button is
pressed, it means the function is not
available on the current disc or at
the current time.
–DVD discs and players are designed
with regional restrictions. Before
playing a disc, make sure the disc is
for the same zone as your player.
–Do not push on the disc tray or
put any objects other than discs on
the disc tray.  Doing so may cause
the disc player to malfunction.
Playable...

20
3139 115 2xxx1
EnglishAuto Eco Power standby mode
This is a power-saving feature, the system
will automatically switch to Eco Power
standby mode if you do not press any
buttons within 30 minutes after a disc has
stopped playing.
Basic playback controls
Pausing playback
During playback, press 2; (or ; on the
remote).
➜To resume normal playback,
press 2; (or PLAY B on the remote).
Selecting another track/chapter
Press S / T or use the numeric
keypad (0-9) to key in a track/chapter
number.
➜If repeat...