Philips Hts3377 User Manual

							22
   
EasyLink 
   
You can turn off or turn on all EasyLink 
features.
   
One-touch play  
   
When you connect your Home Theater 
System to devices that suppor t one-touch play, 
you can control your Home Theater System 
and the devices with one remote control. For 
example, when you press Play on your Home 
Theater System remote control, your TV 
automatically switches to the correct channel 
to show the DVD content. 
   
To enable One-touch play, a video disc must 
be placed in the disc compar tment before 
operation.
   
One-touch standby 
   
When you connect your Home Theater 
System to devices that suppor t standby, you 
can use your Home Theater System remote 
control to put your Home Theater System and 
all connected HDMI devices in standby mode. 
You can perform one-touch standby using the 
remote control from any of the connected 
HDMI devices.
   
System Audio  Control 
   
When you connect your Home Theater 
System to HDMI CEC compliant devices, your 
Home Theater System can switch automatically 
to play audio from the connected device. 
   
To use one-touch audio, you must map the 
audio input from the connected device to your 
Home Theater  System.
   
Audio Input Mapping 
   
When you map the audio input correctly, this 
Home Theater System switches to the audio 
from the played device automatically.   
 
 
 
 
Use Philips EasyLink
 
 
Your Home Theater System suppor ts 
Philips EasyLink, which uses the HDMI CEC 
(Consumer Electronics Control) protocol. 
EasyLink-compliant devices that are connected 
through HDMI connectors can be controlled by 
a single remote control. 
  Note
 
Philips does not guarantee 100% interoperability with   •
all HDMI CEC devices.
 
 
 
 
1  Turn on the HDMI CEC operations on the 
TV and other connected devices. See TVs/
devices manual for details.
   
 
 
2  You can now enjoy the following Philips 
EasyLink controls.
   
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
EN
 
						

							23
   
  
 
 
For example, if the TV audio is 
connected to the  AUX1 
 jack on this 
Home Theater System, select  [Aux1] 
 
and map with the TV (brand name) at 
the right panel.
   
 
 
 
 
6  Select the audio input of this Home 
Theater System that is used to connect to 
other HDMI device (e.g. AUX1, AUX2), 
then press  
  . 
 
 
 
 
7  Select the correct connected device, then 
press  OK 
.
   
 
 
Repeat steps 5~7 to map other    »
connected devices.
   
 
 
 
 
8   Press   
 
 SETUP 
 to exit the menu.
   
 
 
 
 
 
 
Aux 2
Audio Input Mapping
Aux 1[TV]
other (Non-HDMI) [DVD 3400]Coaxial In
Optical In
   
 
 
Map the audio inputs to the 
connected devices
  Note
 
Before you star t, ensure that the audio output of   •
the HDMI TV and other HDMI devices have been 
connected to the audio input jacks on this Home 
Theater System. 
   
  
 
 
 
 
1 Press  DISC 
.
 
 
 
 
2 Press   
 
 SETUP 
.
   
 
 
    »[General Setup] 
 menu is displayed.
 
 
 
 
 
 
3 Press   
.
 
 
 
 
4 Select  [EasyLink Setup] 
, then press   
.
   
 
 
  • [One Touch  Play] 
 and  [One Touch 
Standby] 
 functions are turned on by 
default in the factor y. 
   
 
 
 
 
5 Select  [System Audio  Control] 
 >  [On] 
, 
then press  OK 
 to star t scanning devices.
   
 
 
Once complete, audio input mapping    »
menu is displayed.
OSD Language
Sleep Timer Screen Saver Disc Lock
Display Dim
General Setup
DivX(R) VOD CodeEasyLink
One Touch Standby
System Audio Control
Audio Input Mapping
One Touch Play
EasyLink Setup
EN
Get started
English
 
						

							24
Select a play source
   
 
On the main unit 
 
 
  
 
 
 
 
Press   • SOURCE 
 button repeatedly to 
select:  DISC 
 >  USB 
 
 >   
FM >   
AUX 1 
 
 > 
   
AUX 2 
 
 >   
COAX IN >   
OPTI IN 
 >  MP3 
LINK 
 >  DISC 
 ...
 
 
 
 
  
 
 
 
 
 
On the remote control 
 
 
  
 
 
 
 
Press   • AUDIO SOURCE 
 repeatedly to 
switch to the connected audio source:
   
Display   
Device connected to
 
 
AUX 1 
AUDIO IN-AUX1 jacks
   
AUX 2 
AUDIO IN-AUX2 jacks
   
COAX IN 
COAXIAL DIGITAL IN jack
   
OPTI IN 
OPTICAL DIGITAL IN jack
   
MP3 LINK 
MP3 LINK jack
   
 
 
Press   • RADIO 
 to switch to FM band.
   
 
 
Press   • USB 
 to switch to USB mode.
   
 
 
Press   • DISC 
 to switch to disc mode.
EN
 
						

							25
   
 
 
 
 
Play video
 
Note
 
For video disc, playback always resumes from the   •
point where it was last stopped. To star t play from the 
beginning, press  
   while the message is displayed.
 
 
 
 
Control video play
 
 
 
 
1  Play a title.
 
 
 
 
2  Use the remote control to control the title. 
 
Button  Action
 
  
Star ts, pauses or resumes disc play.
   
 
Stops disc play.
   
 
Skips to the next title or chapter.
   
 
Skips to the beginning of the 
current title or chapter. Press twice 
to jump to the previous title or 
chapter.
   
 
 /   
Searches fast-forward (right) 
or fast-backward (left). Press 
repeatedly to change the search 
speed.
   
In pause mode, slow motion 
backward or forward play.
   
 
 /   
Searches slow-forward (down) 
or slow-backward (up). Press 
repeatedly to change the search 
speed.
   
For VCD, only slow-forward play is 
possible.
   
 
 
 
 
 
 
 
 
 
 
 
5 Play
 
 
 
 
Play a disc
 
Caution
 
Never place any objects other than discs into the disc   •
compar tment.
   
Never touch the disc optical lens inside the disc 
  •
compar tment.
 
 
 
 
1 Press   
 to open the disc compar tment.
 
 
 
 
2  Inser t a disc with its label facing up.
   
 
 
For double-sided disc, load the side to  • 
play faces up.
   
 
 
 
 
3 Press   
 to close the disc compar tment and 
star t disc play.
   
 
 
To view disc play, turn on the TV to  • 
the correct viewing channel for this 
Home Theater  System.
   
 
 
To stop disc play, press   • 
 
.
 
Note
 
Check the types of discs suppor ted. (see ‘Speci cations’   •
> ‘Playback  media’).
   
If the password entr y menu is displayed, enter the 
  •
password before you can play the locked or restricted 
disc.
   
If you pause or stop a disc for about 5 minutes, the 
  •
screen saver activates. To deactivate the screen saver, 
press  DISC 
.
   
After you pause or stop a disc and no buttons are 
  •
pressed within 15 minutes, this Home Theater System 
automatically switches to standby mode. 
Play
English
EN
 
						

							26
Access DVD menu
   
  
 
 
 
 
1 Press  DISC 
 to access disc main menu.
 
 
 
 
2  Select a play option, then press  OK 
.
   
 
 
In some menus, press the   • Numeric 
buttons 
 to input your selection.
   
 
 
To return to the title menu during  • 
play, press  
   
 BACK 
.
   
 
 
 
 
 
 
 
Change video play
 
 
 
 
1  Play a title.
 
 
 
 
2  Use the remote control to change the 
video play. 
  Button  Action
 
 
AUDIO 
SYNC  Selects an audio language or 
channel on a disc.
   
SUBTITLE 
Selects the subtitle language on 
a disc.
   
REPEAT 
Selects or turns off repeat or 
shuf e mode. 
   
Repeat options var y depending 
on the disc type. 
   
For VCDs, repeat play is only 
possible if the PBC mode is 
turned off.
   
ZOOM 
Zooms in or out of the picture.
   
To pan through the zoomed 
image, press the  Navigation 
buttons 
.
   
 
 
 INFO 
Displays the current status or 
disc information.
   
You can change the video 
play options here without 
interrupting disc play.
  Note
 
Some operations may not work with some discs. See   •
the information accompanying the disc for details.
 
 
 
 
 
EN
 
						

							27
Sync audio output with video play
   
If the video play is slower than the audio output 
(sound does not match with the pictures), you 
can delay the audio output to match the video.
   
  
 
 
 
 
1  Press and hold  AUDIO SYNC 
 until 
‘AUDIO SYNC’ is displayed.
   
 
 
2  Within  ve seconds, press  VOL +/- 
 to set 
the delay time for audio output.
  Note
 
If the volume control is not used within  ve seconds, it   •
resumes normal volume control function. 
 
 
 
 
 
Quick skip play to a speci c time
 
 
  
 
 
 
 
1  During play, press   
 
 INFO 
.
   
 
 
The disc status menu is displayed.   »
 
 
 
 
 
 
2 Press   
  
 to view information, then press 
  OK 
.
   
 
 
  • [TT Time] 
 (title time) 
   
 
 
  • [Ch Time] 
 (chapter time) 
   
 
 
  • [Disc Time] 
 (disc time) 
   
 
 
  • [Track Time] 
 (track time) 
 
 
 
 
 
 
3  Press the  Numeric buttons 
 to enter the 
time where you want to skip to, then press 
  OK 
.
 
Note
 
The options are different depending on the disc type.  •
 
 
 
 
 
Access VCD menu or preview menu
 
 
The PBC (Playback Control) for VCD is 
activated by default in the factor y. When you 
load in a VCD, the contents menu is displayed. 
   
 
 
1 Press   
  
 to select a play option, then 
press  OK 
 to star t play.
   
 
 
If PBC is off, it skips the menu and  • 
star ts play from the  rst title.
   
 
 
To return to the menu during play,  • 
press  
   
 BACK 
 (only possible if the 
PBC mode is on).
   
 
 
 
 
2 Press  DISC 
 to preview the contents of the 
disc.
   
 
 
To exit the menu, press   • DISC 
.
 
 
  
 
 
 
 
 
 
3  Select a preview play option, then press 
  OK 
 
 
 
 
  
 
 
 
[Track Digest] 
   
Plays the  rst few seconds of each track in a 
disc.
   
  
 
 
 
[Disc Interval] 
   
Divides the total disc time by six and play the 
 rst few seconds of these inter vals.
   
  
 
 
 
[Track Interval] 
   
Divides the current track by six and play the 
 rst few seconds of these inter vals. 
   
This option is not available in stop mode.
 
Tip
 
You can change the PBC setting (see ‘Adjust settings’ >   •
‘Preferences’ >  [PBC] 
).
 
 
 
 
 
Select Digest Type:
Track Digest
Disc Interval
Track Interval 
EN
Play
English
 
						

							28
Play DivX® video
   
DivX video is a digital media format that retains 
high quality despite a high rate of compression. 
You can enjoy DivX video on this DivX® 
Cer ti ed Home Theater System.
   
 
 
1  Inser t a disc or USB that contains the DivX 
videos.
   
 
 
2 Press  DISC 
 or  USB 
.
   
 
 
A contents menu is displayed.   »
 
 
 
 
 
 
3  Select a title to play, then press   
.
 
 
 
 
4  Use the remote control to control the title. 
 
 
Button   
Action
 
 
AUDIO 
SYNC  Selects an audio language or 
channel.
   
SUBTITLE 
Select DVD or DivX subtitle 
languages.
   
 
Stops play.
   
For DivX Ultra video, press 
this button again to display the 
contents menu.
   
 
 
 INFO 
Displays DivX Ultra video 
information.
  Note
 
You can only play DivX videos that were rented or   •
purchased with the DivX registration code of this 
Home Theater System (see ‘Adjust settings’ > ‘General 
setup’ >  [DivX(R) VOD  Code] 
) .
   
You can play DivX video  les of up to 4GB.
  •
 
 
If the subtitle does not appear correctly, change the   •
character set (see ‘Adjust settings’ > ‘Preferences’ > 
  [DivX Subtitle] 
).
   
This Home Theater System can display up to 45 
  •
characters in the subtitle.
 
 
 
 
 
 
Repeat play a speci c section
 
 
 
 
1  During playback, press   
 
 INFO 
.
   
 
 
The disc status menu is displayed.   »
 
 
 
 
 
 
2 Select  [Repeat] 
 in the menu, then press   
.
 
 
 
 
3  Move to  [ A-B] 
 in the menu, then press 
  OK 
 to set the star ting point.
 
 
 
 
4 Press  OK 
 again to set the ending point.
   
 
 
Repeat play star ts.   »
 
 
 
 
 
 
5  To cancel repeat play, select  [Off] 
 and 
press  OK 
.
 
Note
 
The marked section for repeat play is only possible   •
within a track/title.
 
 
 
 
 
View video play from different camera 
angles
   
 
 
1  During play, press   
 
 INFO 
.
   
 
 
The disc status menu is displayed.   »
 
 
 
 
 
 
2 Select  [Angle] 
, then press   
.
 
 
 
 
3  Press the  Numeric buttons 
 to select an 
angle, then press  OK 
.
   
 
 
Play changes to the selected angle.   »
 
Note
 
Applicable only to discs contain multi-angle scenes.  •
 
 
 
 
 
EN
 
						

							29
Play MP3/WMA music
   
MP3/WMA is a type of highly compressed 
audio  le ( les with .mp3 or .wma extensions).
   
 
 
1  Inser t a disc or USB that contains the MP3/
WMA music.
   
 
 
2 Press  DISC 
 or  USB 
.
   
 
 
A contents menu is displayed.   »
 
 
 
 
 
 
3  Select a folder, then press  OK 
.
 
 
 
 
4  Select a track to play, then press   
.
   
 
 
To return to the main menu, press  • 
 
   
 BACK 
 or press   
 until ‘Previous’ 
folder is selected, then press  OK 
.
 
Note
 
For disc recorded in multiple sessions, only the  rst   •
session is played.
   
This Home Theater System does not suppor t MP3PRO 
  •
audio format.
   
If any special characters are present in the MP3 track 
  •
name (ID3) or album name, it might not be displayed 
correctly on the screen because these characters are 
not suppor ted. 
   
Some WMA  les are protected by Digital Rights 
  •
Management and cannot be played on this Home 
Theater System.
   
Folders/ les that exceed the suppor ted limit of this 
  •
Home Theater System will not be displayed or played.
 
Tip
 
You can select the display of data contents, view folders   •
or  les (see ‘Adjust settings’ > ‘Preferences’ >  [MP3/
JPEG Display] 
).
Play music
 
 
 
 
Control audio track play
 
 
 
 
1  Play a track.
 
 
 
 
2  Use the remote control to control the 
track. 
  Button   Action
 
  
Star ts, pauses or resumes 
disc play.
   
 
Stops disc play.
   
 
Skips to the next track.
   
 
Skips to the beginning of 
the current track. Press 
twice to jump to the 
previous track.
   
 
Selects an item to play.
   
 
 /   
Searches fast-forward 
(right) or fast-backward 
(left). Press repeatedly to 
change the search speed.
   
REPEAT 
Selects or turns off repeat 
or shuf e mode.
   
 
 
 
EN
Play
English
 
						

							30
  Note
 
You may require longer time to display the disc content   •
on the TV due to the large number of songs/photos 
compiled onto one disc.
   
If the JPEG photo is not recorded with an ‘exif ’ type 
  •
 le, the actual thumbnail picture is not be shown on 
the display. It is replaced by a ‘blue mountain’ thumbnail 
picture.
   
This Home Theater System can only display digital 
  •
camera pictures according to the JPEG-EXIF format, 
typically used by almost all digital cameras. It cannot 
display Motion JPEG and pictures in formats other than 
JPEG, or sound clips associated with pictures.
   
Folders/ les that exceed the suppor ted limit of this 
  •
Home Theater System are not displayed or played.
 
 
 
 
 
Control photo play
 
 
 
 
1  Play photo slideshow.
 
 
 
 
2  Use the remote control to control the 
photo. 
  Button  Action
 
  
Skips to the previous photo.
   
 
Skips to the next photo.
   
 
Rotates the photo clockwise.
   
 
Rotates the photo anti-
clockwise.
   
ZOOM 
Zooms in or out of the 
picture.
   
Play pause in zoom mode.
   
 
Stops play.
   
 
 
 
 
 
 
 
 
 
Play photo
 
 
 
 
Play photo as slideshow
 
 
This Home Theater System can play JPEG 
photos ( les with .jpeg or .jpg extensions).
   
 
 
1  Inser t a disc or USB that contains the JPEG 
photos.
   
 
 
2 Press  DISC 
 or  USB 
.
   
 
 
Slideshow begins (for Kodak disc) or    »
a contents menu (for JPEG disc) is 
displayed.
   
 
 
 
 
3  Select the folder/album you want to play.
   
 
 
To preview the photos in the folder/ • 
album, press  
   
 INFO 
.
 
 
  
 
 
 
 
To go to previous or next screen  • 
display, press  
   /   
.
   
 
 
To select a photo, press the  • 
  Navigation buttons 
.
   
 
 
To display the selected photo only,  • 
press  OK 
.
 
 
 
 
 
 
4 Press   
 to star t slideshow play.
   
 
 
To return to the menu, press  • 
 
   
 BACK 
.
EN
 
						

							31
Play from USB device
   
This Home Theater System plays/views MP3, 
WMA, DivX (Ultra) or JPEG  les on the 
following USB devices:
   
 
 
digital camera that complies with the PTP  • 
standard
   
 
 
 ash drive • 
   
 
 
memor y card reader • 
   
 
 
HDD (external power source needed) • 
 
 
 
 
 
 
 
 
 
 
 
 
1  Connect a USB device to the   
 
 (USB) 
 
jack.
   
 
 
2 Press  USB 
.
   
 
 
A contents menu is displayed.   »
 
 
 
 
 
 
3  Select a  le to play, then press   
.
   
 
 
Play star ts.   »
   
 
 
 
 
 
 
To stop play, press  • 
 
 or remove the 
USB device.
  Note
 
If the device does not  t into the USB jack, connect it   •
through a USB extension cable.
   
If you connect a multiple USB card/device reader, only 
  •
one card/device can be accessed. 
 
 
 
 
 
 
/
Play musical slideshow
 
 
Play MP3/WMA music  les and JPEG photo 
 les simultaneously to create musical slideshow. 
The MP3/WMA and JPEG  les must be stored 
on the same disc or USB device.
   
 
 
1  Play MP3/WMA music. 
 
 
 
 
2  Navigate to the photo folder/album and 
press  OK 
 to star t slideshow play.
   
 
 
Slideshow begins and continues till the    »
end of the photo folder or album. 
   
 
 
Audio continues to play till the end of    »
the disc.
   
 
 
 
 
 
 
To stop slideshow play, press  • 
 
.
   
 
 
To stop music play, press   • 
 
 again.
   
 
 
 
 
 
 
EN
Play
English