Philips Hts3540 User Manual

9
Use video options
   
Access several useful features while viewing 
video.
Note
  • 
Available video options depend on the video 
source.
Button  Action
 
  
 /   
Searches slow-backward or 
slow-for ward. Press repeatedly to 
change the search speed.
   
For VCD/SVCD, slow-back ward 
search is not available.
   
AUDIO 
SYNC  Selects an audio language or 
channel.
   
SUBTITLE 
Selects subtitle language for video.
   
 
 
 INFO  Displays information about what 
is playing.
   
REPEAT 
Repeats a chapter...

10
Note
  • 
If the USB storage device does not  t into the 
connector, use a USB ex tension cable.
  • 
 
The home theater does not suppor t digital 
cameras that need a computer program to 
display photos.
  • 
 
The USB storage device must be FAT or DOS -
format ted, and Mass Storage Class compliant.
More play features for disc or 
USB
   
 
Several advanced features are available for video 
or picture playback from a disc or USB storage 
device.
Play a musical slideshow
   
Play music and pictures...

11
Note
  • 
AM and digital radio are not suppor ted.
  • 
 
If no stereo signal is detected, you are 
prompted to install the radio stations again.
  • 
 
For the best reception, place the antenna away 
from the T V or other sources of radiation.
Change tuning grid
   
In some countries, you can switch the FM tuning 
grid between 50 kHz and 100 kHz. Changing 
tuning grid erases all preset radio stations.
1 Press  RADIO 
.
2 Press   
.
3  Press and hold   
 until ‘GRID 9’ (50 kHz) 
or ‘GRID 10’ (100 kHz)...

12
6 Change settings
   
This section helps you to change the settings of 
your home theater. 
Caution
  • 
Most of the set tings are already con gured 
with the best value for the home theater. 
Unless you have a speci c reason to change a 
set ting, it is best to leave it at the default value.
Access the setup menu
1 Press     
SETUP 
.
  » 
 
 
 
The following menu appears.
Symbol  Description
 
 
[General Setup]
   
[Audio Setup]
   
[Video Setup]
   
[Preference Setup]
2  Select a setup menu, then...

13
•    
 
 
 
[HDMI Audio] 
 : Enables or disables 
HDMI audio output for the T V.
•    
 
 
 
[Audio Sync] 
 : Sets a delay for audio 
output when you play a video disc.
4 Press  OK 
 to con rm your choice.
Note
  • 
For set tings related to HDMI, the T V must be 
connected through HDMI.
Change video settings
1 Press     
SETUP 
.
2 Select  [Video Setup] 
, then press  OK 
.
3  Select and adjust the following set tings:
•  
 
 
 
 
[TV System] 
 : Selects a T V system that 
is compatible with the TV....

14
7 Update software
   
To check for new updates, compare the current 
software version of your home theater with the 
latest software version (if available) on the Philips 
web site.
Check software version
1 Press     
SETUP 
.
2 Select  [Preference Setup] 
 >  [Version Info.] 
, 
then press  OK 
.
  » 
 
 
 
The software version is displayed.
Update software from a CD-R 
or USB
1  Check for the latest sof tware version on 
www.philips.com/support.
•    
 
 
Search for your model and click on...

15
   
 
 
 
 
 
Video 
  • 
 
Signal system: PAL / NTSC
  • 
 
HDMI output: 480i/576i, 480p/576p, 720p, 
1080 i, 1080 p
   
 
 
 
Audio 
  • 
 
Sampling frequency:
•  
 
 
 
MP3: 32 kHz, 44.1 kHz, 48 kHz
•  
 
 
 
WMA: 44.1 kHz, 48 kHz
  • 
 
 
 
Constant bit rate:
•  
 
 
 
MP3: 112 kbps - 320 kbps
•  
 
 
 
WMA: 64 kbps - 192 kbps
   
 
 
 
 
 
Radio 
  • 
 
Tuning range: FM 87. 5-108 MHz (50/100 
kHz)
  • 
 
Signal-to-noise ratio: FM 50 dB
  • 
 
Frequency response: FM 180 Hz-10 kHz
   
 
 
 
USB...

16
9 Troubleshooting
Warning
  • 
Risk of electric shock . Never remove the 
casing of the product. 
   
To keep the warranty valid, never tr y to repair the 
product yourself. 
   
If you have problems using this product, check the 
following points before you request ser vice. If you 
still have a problem, register your product and get 
suppor t at www.philips.com/welcome. 
   
 
If you contact Philips, you will be asked for the 
model and serial number of your product. The 
model number and serial...

17
The contents of a USB storage device cannot be 
read.
  • 
 
Ensure that the format of the USB storage 
device is  compatible with the home theater  
 
(see ‘Product speci cations’ on page   
15  
) .
  • 
 
Ensure that the USB storage device 
is format ted with a  le system that is 
suppor ted by the home theater (note that 
NTFS is not suppor ted).
‘No entry’ or ‘x’ sign appears on the TV.
  • 
 
The operation is not possible.Sound
No sound.
  • 
 
Ensure that the audio cables are connected 
and...

18
M
MP3 
   
create MP3  les   12 
O
overview 
   
connectors  6 
   
main unit   4 
   
remote control   5 
P
password  14 
picture 
   
slide show   11  
   
troubleshooting  17 
play 
   
disc  9 
   
options  9 
   
radio  11  
   
troubleshooting  17 
   
USB storage device   10 
product care  3 
product specifi cations  15 
progressive scan  2 
R
radio 
   
play  11  
   
program  11  
   
tune  11  
   
tuning grid   12 
recycle  3 
region code  15 
remote control  5 
repeat  9 ,  11  
10 Index...