Planar Pd7130 Projector User Manual

Basic Operation
23
On-Screen Display Menu Items
This list shows the items that can be set in the projector.
Picture Brightness -50 ~ +50
Contrast -50 ~ +50
Color -64 ~ +64 
Tint -64 ~ +64 
SharpnessSoftest, Soft, Normal, Sharp, 
Sharpest
Gamma 1.0/1.5/1.8/2.0/2.2/2.35/2.5/2.8
Color TempColor Temp 5000k ~ 10000k, 
Native
x         -30 ~ +30
y         -30 ~ +30
Reset this CT
Picture SettingMemory1/ Memory2/ Memory3/ 
Customer1/ Customer2
White Balance
R Gain
B Gain
G Gain
R Offset
G Offset
B Offset
Save...

Basic Operation
24
On-Screen Display Menus
Picture Menu
ItemDescriptionDefault
BrightnessPress 
W or X button to adjust the brightness.
0
ContrastPress 
W or X button to adjust the contrast.
0
ColorPress 
W or X button to adjust the screen color.
0
TintPress 
W or X button to adjust the video tint/hue.
Press X to make the image more green.
Press W to make the image ore purple.0
SharpnessPress 
W or X button to adjust the display sharpness. 
Select from Softest, Soft, Normal, Sharp, or Sharpest. Normal...

Basic Operation
25
Layout Menu
Item Description
Aspect RatioPress 
W or X button to toggle between the display formats. Select from 
4:3, 16:9, LetterBox or Native.
4:3
•  
Resolution depends on the input signal
•  4:3 input scaled to fit display height
•  Width scaled to maintain 4:3 aspect ratio
•  Black bars on left and right (taking up 25% of the whole display)
16:9
•  
Resolution: 16:9
•  4:3 input is stretched to fit 16:9 display.
•  Stretches entire image.
LetterBox
•  
Resolution 1280 x 720
•...

Basic Operation
26
H KeystonePress 
W or X button to correct the distortion of the projected image 
Note:
•  When the image is projected at an angle, the image becomes 
distorted trapezoidal.
•  The function for correcting trapezoidal distortion is called Keystone 
Correction.
•  Keystone Correction can be corrected by adjusting the angle of projection.
•  The trapezoidal distortion of the image can be corrected by adjusting the angle of projection. The 
actual screen can also be set at an angle.
•...

Basic Operation
27
Selecting the Picture Display Mode
VIDEO
4:3Letterbox16:9Native
For 4:3
aspect ratio480i
480p
576i
576p
NTSC
PA L
SECAM768X576 1280X720 1280X720640X480i
640X480p
768X576i
768X576p
640X480
768X576
768X576
For 16:9
aspect ratio480p
576p768X576
768X5761280X720
1280X7201280X720720X480
720X576
720p – – 1280x720 –
1080i – – 1280x720 –
Input SignalOutput screen image
4:3Letterbox16:9Native
480i 
480p 
576i 
576p 
NTSC 
PA L  
SECAM  
   
 
   
For 4:3 aspect ratio
Letter box image
1080i
For...

Basic Operation
28
COMPUTER
4:316:9Native
For 4:3
aspect ratioVGA(640X480) 960X720 1280X720 640X480
SVGA(800X600) 960X720 1280X720 800X600
XGA(1024X768) 960X720 1280X720 1024X768
SXGA(1280X1024) 960X720 1280X720 1280X1024
Input Signal
Output screen image
4:316:9Native
VGA
For 4:3 aspect ratio 
(640x480)
SVGA
For 4:3 aspect ratio 
(800x600)
XGA
For 4:3 aspect ratio 
(1024x768)
SXGA
For 4:3 aspect ratio 
(1280x1024) 

Basic Operation
29
Option Menu
Item Description
White EnhanceUse this option to adjust: the color: white bright or dark.
Press 
W or X button to enable or disable white color enhancement of the image. 
Select from ON or OFF.
•  ON: Emphasizes the bright portions of images.
•  OFF: Disables “White Enhance”.
ECO. ModePress 
W or X button to enable or disable the power saving of the projector. 
This mode uses less power and extends the lamp life, but decreases the lamp brightness.
Select from ON or OFF....

Basic Operation
30
DeinterlaceThis function allows you to determine the type of incoming video content-film, static interlaced 
video and moving interlaced video. Different algorithms are applied for each of the content types.
Press 
W or X button to set the deinterlace mode.•  DCTI: This function is useful to enhance video by replacing the edges of the video with edges 
that have steeper rise and fall times. DCTI turns sloped or sinusoidal waveforms into 
rectangular or square waveforms with the same...

Basic Operation
31
Input Source Menu
In the Main menu, press S or T button to 
select Input Source, and press   button to 
confirm.
Language Menu
In the Main menu, press S or T button to select Language menu, and 
press   button to confirm.
Factor y Reset
In the Main menu, press S or T button to select Factory Reset option 
and press   button to confirm. The projector will return to factory 
default setting.
 Notes
•  When a signal is not received, “Searching” is displayed.
•  If you select “Auto” as the...

Basic Operation
32