Planet Technology Router XRT-412 User Manual

 
 
Parameters   Description 
 
Enable DMZ   Enable/disable DMZ 
 
Note: If there is a conflict between the Virtual Server and the 
DMZ setting, then Virtual Server function will have priority over 
the DMZ function. 
    
Public IP Address The IP address of the WAN port or any other Public IP 
addresses given to you by your ISP  
 
Client PC IP Address Input the IP address of a particular host in your LAN that will 
receive all the packets originally going to the WAN port/Public IP 
address above...

3.6 Print Server 
The print server provides LPR and IPP printing methods. You can enable/disable the print server 
function and change the print server name here. Please assign printer queue name for each 
printer connected to the USB port. 
 
  
 
Note: XRT-412 does not support the GDI interface printer.  
 
 
 
Example: Print server setup with utility 
 
1. Execute Client.exe and the “PrintServer Network driver Setup program” window will be 
displayed. 
 
47  

2. Click “Next” and specify the destination folder where the utility will be installed. 
  
 
3. Click “Next” and specify the program folder where the program icons will be added. 
 
 
 
 
 
 
 48 

 
4. Click “Next” to start installation. 
  
 
5. In a while, the program will finish installing all the utilities and drivers. Thus far you have 
completed the installation phase and prepare to use the print server. 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 49 

 
6. Click “Continue”, and all the print server’s network ports detected on the network will be 
added to your PC. 
 
 
 
7. Finally, the “Installation complete” window is displayed to indicate that the Client Installation 
procedure is finished. 
 
 
Add a Network Printer
 
After installing the print server client tool, you can then perform the standard “Add Printer” 
procedure to add network printer to your PC. Take WinXP as the example: 
 
1. Click “Start” button, choose “Settings Î Printers and...

  
 
4. Select “Use following port”, and choose XRT-412 printer name and Queue name, then to 
click “Next”. 
 
 
 
 
 
 51 

5. Select the suitable printer manufacturer and model, then click “Next” 
 
 
6. Complete the rest of the questions to finish the network printer setup. 
 
 
 52 

Chapter 4 Status 
The Status section allows you to monitor the current status of your router. You can use the Status 
page to monitor: the connection status of XRT-412s WAN/LAN interfaces, the current firmware 
and hardware version numbers, any illegal attempts to access your network, and information on 
all DHCP client PCs currently connected to your network.   
Parameters   Description 
 
4.1 Status and Information Shows the router’s system information  
 
4.2 Internet Connection View XRT-412’s...

Parameters   Description 
 
Information You can see the router’s system information such as the router’s: 
LAN MAC Address, WAN MAC Address, Hardware version, 
Serial Number, Boot code Version, Runtime code Version 
 
 
 
4.2 Internet Connection 
View XRT-412’s current Internet connection status and other related information 
 
 
 
Parameters   Description 
 
Internet Connection This page displays whether the WAN port is connected to a 
Cable/DSL connection. It also displays the router’s WAN port: 
WAN...

 
 
Parameters   Description 
 
Device Status This page shows XRT-412’s current device settings. This page 
displays XRT-412 LAN port’s current LAN IP Address, MAC 
Address and Subnet Mask. It also shows whether the DHCP 
Server function is enabled or disabled. 
 
 
 
4.4 System Log 
View XRT-412’s system operation information. You can see the system start up time, connection 
process...etc. here. 
 
 
 
 
Parameters   Description 
 
System Log This page shows XRT-412’s system operation information,...