Plus He 3100 Projector User Manual

E – 21
Input Screen and Aspect Ratio Selection Screen
XXXXX••••••
Select Full
The image is projected to fill the entire
screen.
Aspect 16:9 screens will be longer than wide.
Video signalProjection image with
Through selectionProjection image when
selected
Select Auto (only with DVI selection)
While maintaining the aspect ratio of the per-
sonal computer, the image is enlarged or
reduced so that no parts protrude beyond
the screen and the image is projected to fill
the screen. Aspect 16:9 screens will be...

E – 22
Operation with the Remote Control
Point the remote control toward the remote control sensor of the main unit and operate.
ASPECT
VIDEOON / STANDBY
SET
ESC
MENU
S-VIDEO YCbCr
DVI
ASPECT buttonThis button selects the vertical and horizontal
ratio of the screen of the input video.
These buttons are used for the
selection of the input signal.
For further information about input selection.VIDEO buttonThis switches the input to the VIDEO signal.S-VIDEO buttonThis switches the input to the S-VIDEO...

E – 23
Input Selection
Press the desired input selection button.
VIDEOS-VIDEO YCbCr
DVI
S-VIDEO
S-VIDEO
VIDEO
YCbCrDVI
Input selection display
A press of the button will result in the unit switching to the
desired input connector.
The display will remain on for a while before disappearing.
To change the duration of the display, see → Page E-35
On-Screen Display Duration Setting.
Note:
* When the power is switched on, the input
selection conditions that existed when the
power was switched off will be in...

E – 24
Using the On-Screen Menu
Only menu operation methods will be described here.
Refer to this page should you need to clarify matters during menu operations.
See the various pages for information about menu functions and performing adjustments and settings.
To perform adjustments and settings, the video is projected and adjustments are made to the optimum condition.
The remote control should be pointed toward the remote control sensor of the projector and operated.
To return the various items that...

E – 25
1
Press the MENU button and display
the menu.
Display of the Menu
Picture1
Brightness 0Contrast 0Color 0Tint 0Sharpness 0
Color Temp. LowNormalHigh Custom Picture2 Setup Info.VIDEO
OptionMENU
2
Press the button again and select the
menu name.
The selected menu name will appear in navy
blue.
Selection of the Menu Name
Picture1
Keystone ModeNormalFull
BlueBlack
´ Keystone
OffOn OffOn - Installation -
Background
Auto Power Off
LEDPicture2SetupInfo.VIDEO
Option
MENU
Each press of the MENU button...

E – 26
5
Press the ESC button and close the
menu display.
The selected menu name will appear in navy
blue.
Exit
Sub menu items
Items that display only an item name have a
sub menu.
Picture1
Keystone Mode
Keystone
- Installation -
Background
Auto Power Off
LEDPicture2SetupInfo.VIDEO
OptionFloor-Front
Floor-Rear
Ceiling-Front
Ceiling-Rear
Picture1
Keystone ModeNormalFull
BlueBlack
+0 Keystone
OffOn OffOn - Installation -
Background
Auto Power Off
LEDPicture2SetupInfo.VIDEO
Option
SET
Press the SET button...

E – 27
Menu List
This is a list of menu item names. See the reference page for information about the ad-
justment and setting method.
The display contents of the item name will differ depending on the input selection.
Picture 1
Picture1
Brightness 0
Contrast0
Color 0
Tint 0
Sharpness1
Color Temp. Low Normal High
Custom
Picture2 Setup Info.
VIDEO
Option
Adjusting the Picture → Page E-29
[VIDEO, S-VIDEO, and YCbCr Input Selection]
[DVI Input Selection]
Adjusting the White Balance → Page E-29
Picture1...

E – 28
Option
On-Screen Display Language Settings → Page E-35
Moving the Menu Display Position → Page E-35
On-Screen Display Duration Adjustment → Page E-35
[Common Inputs]
Picture1
Language En    De    Fr    It    Es    Sv
- Menu Position -
Duration 10 sec.Picture2 Setup Info.VIDEO
Option
Info.
[VIDEO, S-VIDEO, and YCbCr Input Selection]
Saving and Loading of Video Adjustments → Page E-36
Returning to Standard Settings → Page E-37
Resetting the Lamp Timer → Page E-37
Picture1
- Default -
- Lamp Timer...

E – 29
Video Adjustments [Picture 1]
These are picture-related adjustments.
For information about performing menu operations, see → Page E-24
Using the On-Screen Menus.
Picture1
Brightness 0
Contrast 0Color 0Tint 0Sharpness 1
Color Temp. LowNormalHigh Custom Picture2 Setup Info.VIDEO
Option
Preparation
* Project the image.
* Press the MENU button to display the menu, then select [Picture 1].
Brightness / Contrast / Color / Tint / Sharpness
Picture1
Brightness 0
Contrast 0Color 0Tint 0Sharpness 1
Color...

E – 30
Input Video Adjustments [Picture 2]
These functions adjust the input video signal.
See → Page E-24 Using the On-Screen Menu for information about performing
menu operations.
Picture1
Video Filter 2
2 Zoom Filter
VideoAuto ProScan Mode
Gamma CustomGraphics Film Video
Color SystemAuto Picture2Setup Info.VIDEO
Option
Picture1
Zoom Filter 0
Gamma - Pan -
Custom Graphics Film Video Picture2Setup Info.DVI
Option
Preparation
* Project an image.
* Press the MENU button to display the menu, then select...