Pocket Radio Sangean Dt300vw Operating Instruction

							     1 53 6 7 8 9 11 12 13 14 2410 
2 
						

							3                  Location Of Controls
Welcome to SANGEAN World of Listening.
To ensure proper operation please familianrize yourself with
These instructions before using your new receiver.
Location of Controls
Volume Control---------------------------------------------------------
LCD Display------------------------------------------------------------Lock switch-------------------------------------------------------------Tuning LED-------------------------------------------------------------
On/Off Button----------------------------------------------------------Earphone jack-----------------------------------------------------------Speaker On/Off Slector------------------------------------------------ 
Band Selection Button/Time Set Button------------------------------
Mono / Selection Button / Time (Alarm) Set Button-----------------
Battery Compartment--------------------------------------------------Standby Set / Memory Button-----------------------------------------
Select Button-----------------------------------------------------------Tuning Control/Memory Selection/Time Adjust--------------------1 2 3 145 67 8910111213
-14 
						

							1 2 3 4 5 6 7 8 9
ABCDEF
I
J
K
L
4
GH 
						

							5                        Display Icons
 Band Selected/ PM----------------------------------------------------------
 Timer / (Alarm)--------------------------------------------------------------
 FM Stereo lndicator---------------------------------------------------------
 System Lock----------------------------------------------------------------- Low Battery---------------------------------------------------------------- -
 Standby Set------------------------------------------------------------------ Time /Frequency------------------------------------------------------------
 Digit for Memory Slot------------------------------------------------------
 Memory Delete-------------------------------------------------------------- Auto Preset-------------------------------------------------------------------
 Memory Set------------------------------------------------------------------
 Select Cursor----------------------------------------------------------------A
B
C
D
E
F
G
H
I
J
K
L 
						

							                   Battery Installation
The battery cover is located on the back of the unit. Slide the cover in the 
direction of the arrow to gain access to the battery compartment 
insert 2 AAA(UM-4) batteries into the compartment.Make sure that
batteries are positioned in accordance with the diagram located below
batteries in battery compartment. Replace cover.
Note:
[1]  A low battery icon E appearing on the LCD display indicates a weak
       and replacement is necessary.
[2]  To ensure that the preset memory and time are not lost during battery
       replacement make sure that power on/off switch      is in the off
       position and that the batteries are replaced within 3 minutes.6105  
						

							73 8131488Setting Time
When batteries are installed for the first time the LCD display time digit will
flash indicating that the time needs to be set. The clock can be set with
the power off but the lockswitch       must be off. To set time press Time
Set Button      for more then 2 seconds until hour digit flashes. While
hour digit is flashing use Time Adjust Buttons        and        to select the
correct hour. Pressing Time Set Button        again will cause the minite digit 
to flash. Use same procedure as hour set to set minite set. Press Time Set 
Button       to finalize time setting.
Long Term Alarm Set
Press Standby Button      for more than 2 seconds until hour digit flashes. 
Press Time Adjust Button       and      to set the required hour and then 
Press the Standby Button       again to cause the minute button to flash.
Set minute desired same way as hour was set. Press Standby Button 
again to finalize setting.13141111 
						

							813141499LCD will return to real time and Standby Set icon    will appear in display .
A buzzer will sound when set time is reached and will continue for at least 3
mimutes or until it is stopped by pressing the Power On/Off Button.
Short Term Alarm Set
This receiver is equipped with a short term 1-180minute timer.To set timer 
Press the Alarm Set Button      for more than 2 seconds until LCD alarm
set icons    appears time digit flashes.During flashing press Time Adjust
Button           to adjust to desired time . Press Alarm Set Button       again
to finalize setting . A buzzer will sound when set time is reached and will
continue for at least 3 minutes or until it is stopped by pressing the Power On
/Off Button.F
B 
						

							9                RADIO OPERATION
Antenna/Earphone Use
The earphone cord acts as an antenna during  reception of FM/TV/Weather
Band(DT-300/300V/300VW)channels and should be extended as much as
possible to improve sensitivity. Insert the earphone into the earphone jack
for earphone operation . When listening with the built-in speaker the enclosed 
pig tail trailing antenna should be inserted into the earphone jack       which
will provide antenna function.
A built-in Ferrite Antenna is used for AM reception and it is only necessary to
rotate the radio for maximum dignal strength . No other external antenna is 
repuired .
Speaker On/Off Switch
The built-in speaker may be turned on or off using the Speaker Switch       .
The speaker switch must be in the off position with the earphone plugged 
into the earphone jack to receive FM stereo programs. Stereo icon      will
appear in the display.C7 6 
						

							Volume Control
The volume may be adjusted by using the Volume Control Adjustment 
Tuning the Radio
Band        Frequency                        Antenna
AM           520-1710kHz/                   Internal-Rotate radio for best 
                  522-1629kHz                    reception
FM            87.5-108MHz                   External-Make sure earphone or 
                                                               pig tail antenna is inserted into 
                                                              earphone jack.
TV            CH.2-13(VHF)                  External-Make sure earphone or 
                  (DT-300V/DT-300VW)   pigtail antenna is inserted into 
                                                               earphone jack.101