Home > Sangean > Radio > Pocket Radio Sangean SR 2 Operating Instruction

Pocket Radio Sangean SR 2 Operating Instruction

    Download as PDF Print this page Share this page

    Have a look at the manual Pocket Radio Sangean SR 2 Operating Instruction online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 22 Sangean manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    							   
              
           AM/FM/FM STEREO 2 BANDS
           RECEIVER
           AM/FM STEREO 2 BANDS RADIO
           RADIO 2 GAMMES DONDES
           AM/FM STEREO
           AM-/FM-/FM-STEREO
           -EMPF\NGER MIT 2
           RADIO RECEPTOR AM/FM
           STEREOSR-27
    6
    FM STEREO FM STEREO53 7
    .0 
    9
    0
     
    120 1
    60
    88 
    94 
    98 1
    02 1
    8
    0 
    MHMHzAMX1
    0 KHz
    DBB DEEP BASS BOOST SR-2
    5
    FMSTFMSTFMFMAMAM
    1
    VOLUME VOLUME
     OFF
     OFF
    3P
    OWE
    R 
    ON P
    OWE
    R 
    ON
    2
    PHONES
    PHONES
    DB
    B DB
    B
    4
    TUNING TUNING
    1 
    						
    							EARPHONES1.VOLUME KNOB
    2.POWER OFF/POWER ON/DBB(DEEP Bass Boost)SWITCH3.EARPHONE JACK4.TUNING KNOB5.AM/FM/FM/STEREO BAND SELECTOR6.DIAL POINTER7.BATTERY COMPARTMENT
    The battery cover is located on the left side of the unit.
    Open it by sliding it in the direction of the arrow.
    Insert one AAA(UM-4) size battery in the battery compartment   
    An earphone jack    is located on the right side of the radio.
    Plug the earphones supplied with the unit into this jack to hear the
    program.
    The earphones also act as the FM antenna when plugged into the
    earphones jack. There is a separate antenna built into the radio for
    AM signals, position the radio for best reception.
    Turn on the radio by switching the power switch   to the On position.
    While using earphones you may also set the switch to DBB position to
    have a stronger sound bass. LOCATION CONTROLS.
    POWER SUPPLY
    7
    3
    ANTENNA
    POWER OFF/POWER ON/DBB
    (Deep Bass) SWITCH
     2
    TUNING KNOB2 
    						
    							TUNING KNOB
    T
    urn the tuning knob     slowly to  select the desired station.
    Adjust the volume knob     by rotating  it clockwise for a
    comfortable listening level.
    Whenever th AM or FM frequency is tune in, the dial pointer
          will correspond to the dial scale on the front of the radio.
    this switch    selects the AM broadcast band or the FM 
    broadcast band as indicated. While receiving FM broadcasting,
     set the switch to FM STEREO at normal time,  if the signal 
    becomes weak and distorted, you may select MONO mode 
    by switching to FM position.
    Power Supply:          : 1xAAA(UM-4)battery
    Frequency               :   AM 530-1710kHz
                                    FM  87.5-108.0MHz
    Semiconductors       :   3 Integrated Circuits 3 Diodes
    Output Power           :  0.5mW
    Earphone jack           :  3.5 32ohm (STEREO)
    Design and specifications are subject to
    change without prior notice. 4
    VOLUME KNOB
    1
    DIAL POINTER
    6
    AM/FM/FM STEREO BAND SELECTOR  5
    SPECIFICATIONS3 
    						
    All Sangean manuals Comments (0)

    Related Manuals for Pocket Radio Sangean SR 2 Operating Instruction