Polaroid Projector Polaview 220 User Manual

True-to-life color Examine the projected image for true-to-life color rendition.
renditionUse the TINT option to make the adjustments:
1From the projector control panel or remote control, press
the IMAGE menu key.
2Using the cursor pad, scroll through the menu selections
and highlight TINT on the on-screen menu display.
3Use the left () arrow keys on the cursor pad to
adjust the color balance of the projected image.
Restoring factory If desired, you can restore the original factory settings by...

Storage, cleaning and care
Store the Polaview Model 220 Projector either in its original
shipping container or carrying case to guard it against dust
and lint. Use a non-abrasive, lint-free cloth and non-abrasive
cleaning solution, such as an eyeglass or camera-lens clean-
ing solution, on the lens to keep it clean. Spray the cleaning
solution directly on the cleaning cloth, never on the lens.
Warning:Always disconnect your projector from its electri-
cal supply before performing any maintenance on it....

Replacing the lamp assembly
When you notice that the output from the projector lamp
starts to weaken, you need to replace the lamp assembly
(part number 623374).
Caution:Replace the lamp assembly at the first sign of the
bulb weakening. Do not wait for bulb to burn out as it is
possible for the failing bulb to burst. 
1Turn off the projector.
2Unplug the projector power cord from the wall socket and
from the power receptacle.
Remove the lamp-Depress the latch on the top center edge of the door and...

Remove theUnlock the lamp assembly by rotating the locking key on 
lamp assembly the right side of the lamp assembly counter-clockwise one-
half revolution. Grasp the wire handle and gently pull the
lamp assembly straight out of the unit. 
Replace the Align the lamp-assembly slide rails with the slide-rail 
lamp assemblychannels inside the projector and gently slide the lamp
assembly into the projector. When the lamp assembly is
properly in seated in the projector, rotate the locking key
clockwise...

Troubleshooting guide
Symptom Cause Solution
Projector does not Lamp-assembly door   Refer to lamp assembly 
turn on;  not closed correctly replacement procedure 
no lights or fan and verify proper installation
No power to unit Try another electrical outlet
Blown input power fuse(s) Call Polaroid Technical Support
Vertical bars appear  Nonstandard computer  Press the IMAGE key and 
across the image clock rate scroll to PHASE; 
press < > cursor keys
to remove the bars
Image is upside down Incorrect...

Symptom Cause Solution
Solid-color screen is  Projector is initializing If screen is displayed for 
displayed more than 15 seconds, 
press a source button 
associated with an active 
source
Lamp does not light,  Unit is in Standby mode  Wait approximately 
green LED on rear  and bulb-restrike timer  3 minutes, if bulb does not 
control panel is flashing has not elapsed light press the LAMP key
Image is not in color Incorrect computer video Reboot your computer
No projected image Improper cables/ Check...

Troubleshooting35
Polaroid Offices and Service Centers
Australia
Polaroid Australia Pty. Ltd.
13–15 Lyonpark Road
P.O. Box 163
North Ryde, N.S.W. 2113
Tel.: (02) 9 950 7000
Fax: (02) 887 2209
Belgique/België
Polaroid (Belgium) N.V.–S.A.
Rue Colonel Bourg 111
Kolonel Bourgstraat 111
1140 Bruxelles–1140 Brussel
Tel.: 32 2 702 86 20
Fax: 32 2 726 92 99
Toll free: 32 78 155 905
Brasil
Polaroid do Brasil Ltda.
Av. Paulista, 1776–11º andar
Cerqueira Cesar
São Paulo–Capital
01310-921
Tel.: 55.11.285.6411
Fax:...

36Troubleshooting
New Zealand
Polaroid New Zealand Ltd.
Camera Services
24-26 Anzac Avenue
Auckland
Tel.: (09) 377 3773
Norge
Polaroid (Norge) A/S
Industriveien 8B, 1473 Skårer
Postboks 80, 1471 Skårer
Tlf:   67 90 47 10
Fax: 67 90 51 73
Österreich
Polaroid Ges.m.b.H.
Eitnergasse 5A
1231 Wien
Tel.: 869 86 27
Fax: 869 81 00
Portugal
Polaroid (España) S.A.
Sucursal em Portugal
Edificio Monumental
Avenida Praia da Vitória, 71-A 4º B
1050 Lisboa
Tel.: (01) 316.10. 52
Puerto Rico
Polaroid Caribbean...

Troubleshooting37
One Year Warranty
Polaroid Corporation warrants your Polaview Projector
equipment against defects in manufacture for a period of
one year from the date of purchase. To verify the warranty
period, you should keep the sales slip or other proof of the
purchase date.
Should this product, or any component or accessory 
included with it, become defective at any time during the
warranty period, Polaroid Corporation will, at its discretion,
either replace or repair this item, without charge,...

SOME STATES DO NOT ALLOW THE EXCLUSION OR 
LIMITATION OF INCIDENTAL OR CONSEQUENTIAL 
DAMAGES OR THE DURATION OF IMPLIED WARRANTIES
SO THE ABOVE LIMITATIONS MAY NOT APPLY TO YOU.
THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS,
AND YOU MAY ALSO HAVE OTHER RIGHTS WHICH MAY
VARY FROM STATE TO STATE.
Outside the U.S.A.THIS WARRANTY EXCLUDES ALL INCIDENTAL AND 
and CanadaCONSEQUENTIAL DAMAGES AND DOES NOT AFFECT
YOUR STATUTORY RIGHTS.
Note: No user-serviceable parts inside, with the exception
of the lamp...