Polaroid Projector Polaview 330 User Manual
Have a look at the manual Polaroid Projector Polaview 330 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 15 Polaroid manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
English 17 Using the Remote Control Audio ControlsPress the + button on the remote control to increase the audio volume. Press the - button to decrease the audio volume. Press the Mute button to mute the audio. DragUse the Drag button in combination with the joystick to drag an item. You can also use this button to ÒDrag & DropÓ items. Right Mouse and Remote BacklightUse the right mouse button on the remote control just as you use the right mouse button on the mouse attached to your computer. To activate the backlight for the remote control buttons, press and hold the right mouse button on the remote control for several seconds.
18 English Using the Menus Using the Menus Main MenuThis section introduces you to the main menu and explains how to use the projector menu system. 1 Press the Menu button on either the remote control or on the projector keypad to display the main menu. Each menu item has a submenu. Figure 18: Main Menu 2 Press the up and down direction keys to highlight a menu item. When a menu item is highlighted, the system displays a submenu containing a list of choices. 3 Press the right direction key to move the highlight to the submenu. 4 Press the up or down direction keys to highlight a choice. 5 Press the right direction key to display either a slide-rule control used to adjust the level/value of the choice or a second submenu containing a list of additional choices. 6 Press the up or down direction keys to adjust the level/value of the choice or to highlight a submenu choice. 7 If you highlight a submenu choice, press the up or down direction keys to adjust the level/value of the choice. 8 Press the Menu button, or the left direction key repeatedly, to conÞrm your selection and exit the menu system. Audio Picture Source Features Custom Modes Service Reset 4 4 4 Help4 4 4 4 4
English 19 Using the Menus Use the Reset menu item to reset these submenu values to default values: Table 4: Effect of Reset by Submenu Use the Reset item on a submenu to reset values for all submenu items. Audio MenuUse the Audio menu to control presentation sound characteristics. Figure 19: Audio Menu ¥ Once you have highlighted the Audio menu item, press the right direction key to display the Audio submenu. Figure 20: Audio Submenu Submenu Effect of Reset Audio Resets all values. Picture Resets all values. Source Resets to Computer. Features Resets Compression, Ceiling Mount, Rear Projection values. Does not reset Language, Startup Logo, or Curtain values. Custom Modes Clears all saved custom modes. Help Picture Source Features Custom Modes Service Reset 4 4 4 Audio4 4 4 4 4 Bass Treble Stereo Mode Mute Balance Reset4 4 4 Volume4
20 English Using the Menus VolumeUse Volume to increase or decrease the volume level. BassUse Bass to increase or decrease the bass level. TrebleUse Treble to increase or decrease the treble level. Stereo ModeUse Stereo Mode to select mono or stereo audio effects. The choices are: ¥ Mono: Mixes contents of right and left channels ¥ Linear Stereo: Normal stereo sound without any extra processing ¥ Pseudo Stereo: Creates Òlike stereoÓ effect from mono source ¥ Spatial Stereo: Simulates Ò3D spaceÓ sound from stereo source MuteUse Mute to turn off the sound. BalanceUse Balance to adjust the balance of the sound between stereo speakers. ResetUse Reset to reset all values on the Audio menu to default values. Picture MenuUse the Picture menu to control the appearance of the projected image. Figure 21: Picture Menu Help Audio Source Features Custom Modes Service Reset 4 4 4 4 4 Picture4 4 4
English 21 Using the Menus ¥ Once you have highlighted the Picture menu item, press the right direction key to display the Picture submenu. Figure 22: Picture Submenu FrequencyThe Polaview 330 LCD projector automatically adjusts the frequency based on detected input signals. However, in some cases you may need to manually adjust the frequency. Use Frequency to eliminate evenly spaced dark vertical lines or distortions on the projected image. Adjust the frequency until the vertical lines or distortions disappear. If you have adjusted the frequency but there are still vertical lines or distortions on the projected image, follow the Tracking instructions to adjust tracking. Tip:If your computer is running Windows 95, the Shut Down screen is the best place to adjust frequency. To display the Shut Down screen, click on the Start button in the lower left-hand corner of the screen. Click on Shut Down. Adjust the frequency, then click on No to re- turn to the display screen. TrackingThe Polaview 330 LCD projector automatically adjusts the tracking based on the detected input signals. However, in some cases you may need to manually adjust the tracking. Use Tracking to remove distortions or shaded areas that remain on the screen after adjusting the frequency. Do not adjust tracking until you have Þnished adjusting the frequency. You may need to adjust the frequency and tracking values a few times to completely eliminate vertical lines, distortions, and shaded areas. Adjust the tracking until all distortions and/or shaded areas disappear. ContrastUse Contrast to increase or decrease the contrast level. Tracking Contrast Brightness Sharpness Room Light Color Tint Reset Frequency4 4 4 4 4 4 4 4 4
22 English Using the Menus BrightnessUse Brightness to increase or decrease the brightness level. SharpnessUse Sharpness to increase or decrease the sharpness. Room LightUse Room Light to compensate for differences in room lighting conditions. The three Room Light values provide the best levels of brightness, contrast, and color saturation for different lighting conditions. The choices are: ¥ Dark Room ¥ Normal ¥ Bright Room ColorUse Color to adjust the color intensity. TintUse Tint to adjust the red/green tint level. ResetUse Reset to return all values on the Picture menu to default settings. Source MenuUse the Source menu to select the input signal source. The choices include the computer, composite video, or S-video input signals. Figure 23: Source Menu ¥ Once you have highlighted the Source menu item, press the right direction key to display the Source submenu. Figure 24: Source Submenu Help Audio Picture Features Custom Modes Service Reset 4 4 4 4 Source4 4 4 4 Composite S-Video S Vid Computer
English 23 Using the Menus ComputerUse Computer to select the computer as the signal source. CompositeUse Composite to select composite video as the signal source. S-VideoUse S-Video to select s-video as the signal source. Note:If the system does not detect a computer or video source, it displays a message that indicates that the TV/VCR or computer source was not detected. Features MenuUse the Features menu to select top-level usage preferences for the projector. Figure 25: Features Menu ¥ Once you have highlighted the Features menu item, press the right direction key to display the Features submenu. Figure 26: Features Submenu LanguageUse Language to display on-screen menus in English, French, German, Spanish, Italian, or Chinese. Help Audio Picture Source Custom Modes Service Reset 4 4 4 Features4 4 4 4 4 4 4 4 Startup Logo Curtain Style Compression Ceiling Mount Rear Projection Reset Language 4 4 4
24 English Using the Menus Startup LogoUse Startup Logo to select the logo displayed during projector startup. The choices are: ¥ Default Logo ¥ Custom Logo ¥ Blank For more information on how to install a custom logo in projector memory, see ÒInstalling a Custom Startup LogoÓ on page 28. Curtain StyleUse Curtain Style to select curtain appearance. The choices are: ¥ Red ¥ Green ¥ Blue ¥ Yellow ¥ Cyan ¥ Magenta ¥ Black ¥ White ¥ Default Logo ¥ Custom Logo CompressionUse Compression to enable or disable image compression for SXGA image resolution and above. Enabling compression compresses the SXGA image to Þt the XGA screen. Disabling compression displays a 1024x768 window on the SXGA screen. Ceiling MountUse Ceiling Mount to vertically reverse the projected image to allow for an upside down ceiling mount of the projector. Rear ProjectionUse Rear Projection to horizontally reverse the projected image to allow for rear projection. ResetUse Reset to return all values on the Features menu to default settings.
English 25 Using the Menus Custom Modes MenuUse the Custom Modes menu to save the current projector settings as one of four custom modes or to activate a previously saved custom mode. Figure 27: Custom Modes Menu ¥ Once you have highlighted the Custom Modes menu item, press the right direction key to display the Custom Modes submenu. Figure 28: Custom Modes Submenu Saving the current projector settings as a custom mode saves these parameters: ¥ Frequency ¥ Tracking ¥ Vertical position ¥ Horizontal position ¥ Contrast ¥ Brightness ¥ Room light ¥ Zoom setting ¥ Tint ¥ Color ¥ Sharpness Help Audio Picture Source Features Service Reset 4 4 4 Custom Modes4 4 4 4 4 4 Mode 2 Mode 3 Mode 4 Reset4 4 4 4 Mode 14
26 English Using the Menus Mode 1Use Mode 1 to save the current projector settings as a custom mode or to activate the previously saved Mode 1 settings. Mode 2Use Mode 2 to save the current projector settings as a custom mode or to activate the previously saved Mode 2 settings. Mode 3Use Mode 3 to save the current projector settings as a custom mode or to activate the previously saved Mode 3 settings. Mode 4Use Mode 4 to save the current projector settings as a custom mode or to activate the previously saved Mode 4 settings. ResetUse Reset to return all values on the Custom Modes menu to default settings. To save a custom mode from the Custom Modes submenu: 1 Use the up or down direction keys to highlight the mode number under which you want to save the current projector settings. 2 Highlight the Set to Current item. 3 Press the left direction key to exit the menu and save the custom mode. To activate a custom mode from the Custom Modes submenu: 1 Use the up or down direction keys to highlight the mode number that you want to activate. 2 Highlight the Active item. 3 Press the left direction key to exit the menu and activate the custom mode. Service MenuUse the Service menu to display information on the lamp life and/or projector life, to reset the lamp life timer, or to display test patterns. Figure 29: Service Menu Help Audio Picture Source Features Custom Modes Reset 4 4 4 Service4 4 4 4 4