ProForm 720e Manual

USER’S MANUAL
    CAUTION
Read all precautions and 
instructions in this manual before 
using this equipment. Keep this 
manual for future reference.
Model No. PFEL57916.1
Serial No.                                        
Write the serial number in the space 
above for reference.
www.proform.com
To register your product and 
activate your warranty today, 
go to www.proformservice.com/
registration.
For service at any time, go to 
www.proformservice.com.
Or call 1-888-533-1333
Mon.–Fri. 6 a.m.–6 p.m. MT...

2
TABLE OF CONTENTS
WARNING DECAL PLACEMENT
This drawing shows the location(s) of the warning 
decal(s). If a decal is missing or illegible, see 
the front cover of this manual and request a 
free replacement decal. Apply the decal in the 
location shown. Note: The decal(s) may not be 
shown at actual size.
258871 
WARNING DECAL PLACEMENT. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . \
. . . . . . . . . . . . . . . . . . . . . . . . . . .2
IMPORTANT PRECAUTIONS...

3
    WARNING: To reduce the risk of burns, fire, electric shock, or injury to persons, read 
all important precautions and instructions in this manual and all warnings on your elliptical before 
using your elliptical. ICON assumes no responsibility for personal injury or property damage sus-
tained by or through the use of this product.
1. It is the responsibility of the owner to ensure 
that all users of the elliptical are adequately 
informed of all precautions.
2. Before beginning any exercise...

4
SAVE THESE INSTRUCTIONS
18. The elliptical does not have a freewheel; the 
pedals will continue to move until the fly-
wheel stops. Reduce your pedaling speed in 
a controlled way.
19. Keep your back straight while using the 
elliptical; do not arch your back.
20. Over exercising may result in serious injury 
or death. If you feel faint, if you become short 
of breath, or if you experience pain while 
exercising, stop immediately and cool down. 

5
 
 
 
 
 
 
 
 
  all 
 
 
S TAND ARD SERVICE PLANS   

6
Thank you for selecting the revolutionary PROFORM® 
ENDURANCE 720 E elliptical. The ENDURANCE 720 E 
elliptical provides an impressive selection of features 
designed to make your workouts at home more effec-
tive and enjoyable.
For your benefit, read this manual carefully before 
you use the elliptical. If you have questions after 
reading this manual, please see the front cover of this 
manual. To help us assist you, note the product model 
number and serial number before contacting us. The 
model...

7
PART IDENTIFICATION CHART
Use the drawings below to identify the small parts needed for assembly. The number in parentheses below each 
drawing is the key number of the part, from the PART LIST near the end of this manual. The number following the 
key number is the quantity needed for assembly. Note: If a part is not in the hardware kit, check to see if it 
has been preassembled. Extra parts may be included.
M8 x 20mm 
Screw (126)–2
M10 x 122mm 
Screw (104)–4
M8 Locknut  (102)–4M10 Split 
W asher...

8
• To hire an authorized service technician to 
assemble this product, call 1-800-445-2480.
• Assembly requires two persons.
• Place all parts in a cleared area and remove the 
packing materials. Do not dispose of the packing 
materials until you finish all assembly steps.
• Left parts are marked “L” or “Left” and right parts 
are marked “R” or “Right.”
• To identify small parts, see page 7.
• In addition to the included tool(s), assembly 
requires the following tools:
one Phillips screwdriver 
two...

9
3
2
106
15
3. Press the Cover Mounts (106) on the underside 
of the Rear Stabilizer Cover (15) into the Rear 
Stabilizer (2). 
44. With the help of a second person, place some 
of the packing materials (not shown) under the 
front of the Frame (1). Have the second per-
son hold the Frame to prevent it from tipping 
while you complete this step.
 Attach the Front Stabilizer (6) to the Frame (1)
with two M10 x 122mm Screws (104) and two 
M10 Split Washers (105).
 Then, remove the packing materials from...

10
6. See the inset drawing. Locate the wire tie (B) 
in the lower end of the Upright (4). Tie the wire 
tie to the Main Wire (110). Then, pull the upper 
end of the wire tie until the Main Wire is routed 
through the Upright.
 Tip: To prevent the Main Wire (110) from 
falling into the Upright (4), secure the Main 
Wire with the wire tie (B).
4
4
11 0
B
5
6
5. Tip: Avoid pinching the Main Wire (110). 
Avoid damaging the indicated plastic tabs 
(A). Have a second person hold the Upright (4) 
on the Frame...