Home > Proxima > Projector > Proxima Dp5800 Projector User Manual

Proxima Dp5800 Projector User Manual

Here you can view all the pages of manual Proxima Dp5800 Projector User Manual. The Proxima manuals for Projector are available online for free. You can easily download all the documents as PDF.

Page 21

21
Connecting to a Control Signal (continued)
PS/2 mouse
ADB (Mac) mouse
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
CLK
DATA
SEL1 SEL0
GND
1
2
3
4
5
6
DATA
+5V GND
CLK
Computer Projector
6
3 4
21 Mini Din 6pin
PS/2 cable +5V5
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
SDATA
SEL1 SEL0
GND
1
2
3
4
ADB
+5V GND
Computer Projector
3 4
21 Mini Din 4pin
ADB cable +5V
(POWER ON)
Serial mouse
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
GND
1
2
3
4
5
6
7
8
9
CD
RD
TD
DTR
GND
DSR
RTS
CTS
RI
Computer Projector
12345
67
89 D-sub 9pin...

Page 22

22
Connecting to a Control Signal (continued)
3 . Communication settings
(1) Connect the projector and computer using an RS 232C cable.
(2) Turn on the computer. After the computer is fully started, turn on the projector.
(3) Start communication.
4 . Control command codes
Control command table
Item
MOUSE
COMMUNICATE
POWER
ZOOM
FOCUS
MIRROR
INPUT
(VIDEO) SYSTEM
VOLUME
MUTE
BRIGHT
CONTRAST
COLOR
TINT
SHARPNESS
H.PHASE
H.POSIT
H.SIZE
V.POSIT
BLANK
REVEAL
Projector®Computer
Reply code
1st 2nd data
11h 05h...

Page 23

23
Connecting to a Control Signal (continued)
Control data table
Item
MOUSE
COMMUNICATE
POWER
ZOOM
FOCUS
MIRROR
INPUT
VIDEO SYSTEM
VOLUME
MUTE
BRIGHT
CONTRAST
COLOR
TINT
SHARPNESS
H.PHASE
H.POSIT
H.SIZE
V.POSIT
BLANK
REVEAL
NOTE:If the computer sends an undefined command code or data code the projector
may not operate properly.
Data code
00h=stop mouse emulation.  01 ~ 7Fh=start mouse emulation
0Xh=8N1
1Xh=7N1
X0h=1200bps, X1h=2400bps, X2h=4800bps, X3h=9600bps, X4h=19200bps
1Eh=Power off, 1Fh=Power on...

Page 24

24
Connecting to a Control Signal (continued)
Procedure for checking projector status.
1. The computer sends the command Õ20HÕ + ÔyyHÕ to the projector.
2. The projector replies with the command Ô1xHÕ + ÔyyHÕ + data bytes.
Procedure for setting projector status
1. The computer sends the command Ô3xHÕ + ÔyyHÕ + data bytes.
2. The projector changes its status.
3. The projector replies with the command Ô1xHÕ + ÔyyHÕ + data bytes to indicate its newstatus.
CautionData bytes in step 3 are not always same as...

Page 25

25
System Setup
Typical system connections:
CautionTurn power off to all devices before connecting.
Refer to the instruction manual for each device before connecting.
AC Outlet
VCR with S-VHS out (video models only)
VCR, etc. (video models only)
CRT Display Computer (Notebook type)
Computer (Desktop type) 

Page 26

3Clean the air filter using a vacuum cleaner.
If dirt is still present, wipe the air filter with a cloth moistened with water, or use a neutral detergent and
wipe the filter dry with a dry cloth.
4Re-install the air filter.
CautionIf the air filter is filled with dust, etc., the protection circuit will turn the projector power off.
Lamp Replacement
The estimated operating time of the lamp is approximately 700 hours. The following symptoms indicate that the
lamp should be replaced:
¥ A dark picture.
¥...

Page 27

Troubleshooting
Check the following before asking for service.
If trouble continues, call your dealer or Proxima Technical Support.
Phone: 619-457-5500, Worldwide Web: http://www.proxima.com
Problem
No picture or sound.
Sound is heard with
no  picture.
Color is weak and tint is
incorrect.
Picture is dark.
Picture is not clear.
LAMP indicator glows
red.
TEMP indicator glows
red.
LAMP indicator blinks
red.
Possible Cause
¥ The Main power is not turned on.
¥ The power cord is disconnected.
¥ The setting of...

Page 28

Specifications¥ All specifications are subject to change without notice.
Product type
Model name
Display system
Panel size
Drive system
Number of pixels
Lens
Lamp
Speaker
Power supply
Power consumption
Usable temperature range
Dimensions
Weight
video signal input
terminal
RGB input/output
signal terminal
Control terminal
Accessories
Liquid crystal projector
DP5800
3 sheets of liquid crystal panels, 3 primary color lights shutter system
1.3 inches
TFT active matrix
(H800 x V600) 480,000 pixels
Zoom lens...

Page 29

Warranty and Servicing
Please read this operating guide before calling for service.
For warranty and service claims, please contact Proxima Corporation
7/97 Part Number: 710-00519-1Printed in USA
Proxima Corporation
Main OfficeProxima Europe LTD.
9440 Carroll Park Drive St. Thomas House
San Diego, CA 92121-2298 28-32 Spittal Street
U.S.A. Marlow Bucks SL7 1DB
Phone (619) 457-5500 United Kingdom
Fax (619) 457-9647 Phone +44 (0) 1628 481 555
http://www.proxima.com Fax +44 (0) 1628 487 744 
Start reading Proxima Dp5800 Projector User Manual

Related Manuals for Proxima Dp5800 Projector User Manual

All Proxima manuals