Proxima Pro Av 9350 Projector User Manual

®
Pro AV 9350
PRESENTATIONS
WORKING SESSIONS
TRAINING
MULTIMEDIA
ANIMATION
VIDEO
English
Deutsch
Italiano
EspañolFrançaisE
D
F
I
ES
THIS IS TENTATIVE
SAMPLE.
✽ Projection lens is optional. 

2
CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK).  NO USER-
SERVICEABLE PARTS INSIDE EXCEPT LAMP REPLACEMENT.  REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
THIS SYMBOL INDICATES THAT DANGEROUS
VOLTAGE CONSTITUTING A RISK OF ELECTRIC
SHOCK IS PRESENT WITHIN THIS UNIT.THIS SYMBOL INDICATES THAT THERE ARE IMPORTANT
OPERATING AND MAINTENANCE INSTRUCTIONS IN THE
OWNERS MANUAL WITH THIS UNIT.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
Before operating this projector, read this...

3
SAFETY PRECAUTIONS
All the safety and operating instructions should be read before
the product is operated.
Read all of the instructions given here and retain them for later
use.  Unplug this projector from AC power supply before
cleaning.  Do not use liquid or aerosol cleaners.  Use a damp
cloth for cleaning.
Follow all warnings and instructions marked on the projector.
For added protection to the projector during a lightning storm,
or when it is left unattended and unused for long periods of
time,...

4
COMPLIANCES
Federal Communication Commission Notice
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part
15 of FCC Rules.  These limits are designed to provide reasonable protection against harmful interference when
the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful
interference...

5
TABLE OF CONTENTS
FEATURES AND DESIGN 6
BEFORE OPERATION 16COMPUTER MODE 27
VIDEO MODE 35
SETTING 39
APPENDIX 42 PREPARATION 7
NAME OF EACH PART OF THE PROJECTOR 7
SETTING-UP THE PROJECTOR 8
CONNECTING THE AC POWER CORD 8
LENS INSTALLATION 9
POSITIONING THE PROJECTOR 9
LENS SHIFT ADJUSTMENT 9
PICTURE LEVEL AND TILT ADJUSTMENT 10
MOVING THE PROJECTOR 10
CONNECTING THE PROJECTOR11
TERMINALS OF THE PROJECTOR 11
CONNECTING TO THE COMPUTER 14
CONNECTING TO THE VIDEO EQUIPMENT 15
SIDE  CONTROLS AND...

6
FEATURES AND DESIGN
This Multimedia Projector is designed with the most advanced technology for portability, durability, and ease of
use.  The projector utilizes built-in multimedia features, a palette of 16.77 million colors, and matrix liquid crystal
display (LCD) technology.
Compatibility
This projector widely accepts various video and
computer input signals including;
Computers
IBM-compatible and Macintosh computers up to
1280 x 1024 resolution.
6 Color Systems
NTSC, PAL, SECAM, NTSC 4.43, PAL-M...

7
PREPARATION
NAME OF EACH PART OF THE PROJECTOR
BOTTOM OF THE CABINET
BACK OF THE CABINET
HOT AIR EXHAUSTED !
Air blown from the exhaust vent is hot.
When using or installing the projector, the
following precautions should be taken.
Do not put a flammable object near this vent.  
Keep the rear grills at least 3’ (1m) away
from any object, especially heat-sensitive
object.
Do not touch this area, especially screws
and metallic parts.  This area will become
hot while the projector is used.
This...

8
SETTING-UP THE PROJECTOR
This projector uses nominal input voltages of 100-120 V
or 200-240 V AC.  The projector automatically selects the
correct input voltage.  It is designed to work with single-
phase power systems having a grounded neutral
conductor.  To reduce the risk of electrical shock, do not
plug into any other type of power system.
Consult your authorized dealer or service station if you
are not sure of the type of power supply being in use.
Connect the projector with the peripheral...

9
POSITIONING THE PROJECTORPREPARATION
Before setting up the projector, install the Projection Lens on the Projector.
1. Before installation, check where the projector is used and prepare suitable lens. For specifications of the
Projection Lens, refer to the manual separately attached or contact the sales dealer where you purchased the
projector.
2. For installation, refer to the installation manual supplied to the Projector.
LENS INSTALLATION
When moving or setting up the projector, be sure to replace...

10
PREPARATION
PICTURE LEVEL AND TILT ADJUSTMENT
Picture tilt and projection angle can be adjusted with
handles on both sides of the projector.  Projection angle
can be adjusted to 5.7 degrees upper way. 
1
2
3
MOVING THE PROJECTOR
CAUTION IN CARRYING OR TRANSPORTING THE PROJECTOR
Do not drop or bump the projector, otherwise damages or malfunctions may result.
When carrying the projector, use a suitable carrying case.
Do not transport the projector by using a courier or transport service in an...