Quasar Vm L152 Operating Instructions Manual

Basic Operation
Special Features
For Your Information Getting Started
Camcorder
Operating Instructions
 Model No.
LSQT0598A
VM-L152
For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected]
Please read these instructions carefully before attempting to operate this product.
Please save this manual.
Guía para rápida consulta en español está incluida.
R
01.L152 Getting p01-0702.2.18, 1:38 PM 1 

2For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected]
Things You Should Know
Thank you for choosing Panasonic!
You have purchased one of the most
sophisticated and reliable products on the
market today. Used properly, it will bring
you years of enjoyment. Please take time
to fill in the information to the right.
The serial number is on the tag located on
the rear side of your Camcorder. Be sure
to retain this manual as your convenient
Camcorder information...

3
Getting StartedSafety Precautions
Things You Should Know
WARNING : TO PREVENT FIRE OR SHOCK HAZARD, DO NOT
EXPOSE THIS EQUIPMENT TO RAIN OR MOISTURE.
Your Compact VHS Camcorder is designed to record and play back in Standard Play (SP)
and Super Long Play (SLP) modes. You can also play a Compact VHS Camcorder
recording on your VHS VCR using the supplied VHS PlayPak.
This Camcorder is equipped with the HQ System to provide excellent video pictures, and
is compatible with standard VHS equipment.
It is...

4For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected]
1. Read Instructions – All the safety and
operating instructions should be read before
the unit is operated.
2. Retain Instructions – The safety and
operating instructions should be retained for
future reference.
3. Heed Warnings – All warnings on the unit
and in the operating instructions should be
adhered to.
4. Follow Instructions – All operating and
maintenance instructions should be followed.
5....

5
Getting Started
USE & LOCATION•TO AVOID SHOCK HAZARD ...  Your Camcorder and power supply should not be exposed to rain or moisture.
Do not connect the power supply or operate your Camcorder if it gets wet. Your Camcorder has been designed for
outdoor use, however it is not designed to sustain direct exposure to water, rain, sleet, snow, sand, dust, or a direct
splashing from a pool or even a cup of coffee. This action could permanently damage the internal parts of your
Camcorder. Do not attempt to...

6For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected]
Table of Contents
Viewfinder/LCD Monitor Indications ....................................................... 29~30
Operation Notes 
(Cleaning EVF)......................................................................... 31
Notice ............................................................................................................... 31
Replacing Clock Battery...

7
Getting Started
Quick Operation Guide
See page 19.
1Press LCD-OPEN to unlock the LCD monitor.
Swing it fully open and adjust the angle.
2Set POWER to CAMERA.
3Press RECORD/PAUSE
to start recording.
Press 
RECORD/PAUSE
again to pause recording. See page 16.
1Attach fully
charged 
Battery
(page 8).
2Slide TAPE
EJECT to open
door.
3Insert cassette
(page 10).
4Press here to
close door.
1Press LCD-OPEN to unlock the LCD monitor.
Swing it fully open and adjust the angle (see above).
Charging the Battery...

8For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected]
Supplying Power
To use battery refresh, insert Battery on AC
Adaptor (see steps 1~2 above), then press
BATTERY REFRESH.
The REFRESH Lamp lights, then goes out when
discharge is complete. Battery charging will then
start automatically.
If 
BATTERY REFRESH is pressed by mistake,
remove Battery from AC Adaptor and reinsert it
for normal charging.
Note:
• Charging takes about 5 hours when Battery
Refresh is...

9
Getting Started
Supplying Power
Caution:• Charge only with specified charger.
• Battery can be charged within a temperature range of
10 °C (50 °F) and 35 °C (95 °F).
• Battery is normally warm after charging or just after use.
• Do not use an insufficiently charged or worn-out Battery.
Safety precautions:• Do not get Battery near, or dispose of in, fire.
• Do not directly connect (short circuit) the positive (+)
and negative (–) terminals.
• Never attempt to disassemble or reassemble Battery.
To avoid...

10For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected]
Cassette Information
1Turn Tape Wheel in direction of arrow
until there is no slack.
2Attach Battery (page 8).
3Slide TAPE EJECT to open door.
4Insert cassette as shown.
5Press here to close door.
1
2
3
4• To remove the cassette, slide the TAPEEJECT switch.5
1To prevent accidental erasing,break off tab with screwdriver.
(Or, slide tab open.)
2To record again,
cover hole with adhesive tape.
(Or, slide...