Home > Ranger > Radio > Ranger_tr936966 Cb Tranciever_service Manual

Ranger_tr936966 Cb Tranciever_service Manual

Add to Favourites
    Download as PDF

    View the Ranger_tr936966 Cb Tranciever_service Manual for free. All the Ranger manuals and user’s guides are available for free view without any registration. You can also download the manual as PDF to your computer.

    Overview View all the pages Comments
    Page 1 - 1 - TR-936 TR-966 TABLE OF CONTENTS PAGE CHAPTER 1 SPECIFICATIONS 1.0 General . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 1.1 Transmitter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 1.2 Receiver . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ....
    Page 2 - 2 - TR-966 SPECIFICATIONS 1.0 GENERAL Model TR-936 / TR-966 Frequency Range 26.965 ~ 27.405MHz. Emission Modes TR-936 : AM. TR-966 : AM/SSB. Frequency Control Phase Lock Loop (PLL) synthesizer. Frequency Tolerance ± 0.005 % Frequency Stability ± 0.001 % Operating Temperature Range -30°C to +50°C Microphone Plug-in dynamic; with push-to-talk switch and coiled cord. Input Voltage 13.8V DC nominal ±15%. Current Drain : Transmit (AM full mod.)
    Page 3 - 3 -   Figure 2-1 Front Panel 2.0 INTRODUCTION This section explains the basic operating procedures for the TEXAS RANGER TR-936 / TR-966 mobile transceiver. 2.1 CONTROL AND CONNECTIONS 2.1.1 FRONT PANEL Refer to the above Figure 2-1 for the location of the following controls. 1. MIC GAIN/ANF CONTROL Adjust the microphone gain in the transmit and PA modes. This controls the gain to the extent that full talk power is available several inches away from...
    Page 4 - 4 - fully counterclockwise, and then turn clockwise until the background noise is just eliminated. Further clockwise rotation will increase the threshold level and only strong signals will be heard. 4. RF GAIN CONTROL This control is used to reduce the gain of the RF amplifier under strong signal conditions. 5. SWR CAL CONTROL This SWR CAL control allows the user to calibrate the SWR meter. 6. S-RF/CAL/SWR SWITCH In the S-RF position, the meter will indicate the strength of the signal...
    Start reading Ranger_tr936966 Cb Tranciever_service Manual

    Related Manuals for Ranger_tr936966 Cb Tranciever_service Manual

    All Ranger manuals