Home > Ricoh > Printer > Ricoh Aficio MP C2500 User Manual

Ricoh Aficio MP C2500 User Manual

Here you can view all the pages of manual Ricoh Aficio MP C2500 User Manual. The Ricoh manuals for Printer are available online for free. You can easily download all the documents as PDF.

Page 21

Network Settings
13
1 Network Settings
This section describes the network settings you can change with User Tools (Sys-
tem Settings). Make settings according to functions you want to use and the in-
terface to be connected.
Important
❒These settings should be made by the system administrator, or with the ad-
vice the system administrator.
Settings Required to Use the Printer/LAN-Fax
This section lists the settings required for using the printer or LAN-Fax function.
Ethernet
This section lists the...

Page 22

Connecting the Machine
14
1
Note
❒IPv6 can be used only for the printer function.
❒In [Effective Protocol], check that the protocol you want to use is set to [Active].
❒[LAN Type] is displayed when the wireless LAN board is installed. If Ethernet
and IEEE 802.11b (wireless LAN) are both connected, the selected interface
has priority.
Reference
p.58 “Interface Settings”
IEEE 1394 (IPv4 over 1394)
This section lists the settings required for using the printer or LAN-Fax function
with IEEE 1394 interface...

Page 23

Network Settings
15
1
IEEE 802.11b (wireless LAN)
This section lists the settings required for using the printer or LAN-Fax function
with IEEE 802.11b (wireless LAN).
For details about how to specify the settings, see “Interface Settings”.
Note
❒In [Effective Protocol], check that the protocol you want to use is set to [Active].
❒[IEEE 802.11b] and [LAN Type] are displayed when the wireless LAN interface
board is installed. If both Ethernet and wireless LAN (IEEE 802.11b) are con-
nected, the selected...

Page 24

Connecting the Machine
16
1
Settings Required to Use Internet Fax
This section lists the settings required for using Internet Fax.
Ethernet
This section lists the settings required for using Internet Fax.
For details about how to specify the settings, see “Interface Settings” and “File
Transfer”.
Menu User Tool Setting Requirements
Interface Settings/NetworkMachine IPv4 Address Neccessary
Interface Settings/NetworkIPv4 Gateway Address Neccessary
Interface Settings/NetworkDNS Configuration As required...

Page 25

Network Settings
17
1
Note
❒In [Effective Protocol], check that the protocol you want to use is set to [Active].
❒[LAN Type] is displayed when the wireless LAN interface board is installed. If
both Ethernet and wireless LAN (IEEE 802.11b) are connected, the selected in-
terface takes precedence.
❒[SMTP Server] and [Fax E-mail Account] must be specified in order to use the
send function.
❒When [POP before SMTP] is set to [On], also make setting for [Reception Protocol]
and [POP3 / IMAP4 Settings].
❒When...

Page 26

Connecting the Machine
18
1
Note
❒[IEEE 1394] is displayed when the IEEE 1394 interface board is installed.
❒In [Effective Protocol], check that the protocol you want to use is set to [Active].
❒[SMTP Server] and [Fax E-mail Account] must be specified in order to use the
send function.
❒When [POP before SMTP] is set to [On], also make setting for [Reception Protocol]
and [POP3 / IMAP4 Settings].
❒When [SMTP Authentication] is set to [On], also make setting for [Administrators
E-mail Address].
❒[E-mail...

Page 27

Network Settings
19
1
IEEE 802.11b (wireless LAN)
This section lists the settings required for using Internet Fax with IEEE 802.11b
(wireless LAN).
For details about how to specify the settings, see “Interface Settings” and “File
Transfer”.
Menu User Tool Setting Requirements
Interface Settings/NetworkMachine IPv4 Address Neccessary
Interface Settings/NetworkIPv4 Gateway Address Neccessary
Interface Settings/NetworkDNS Configuration As required
Interface Settings/NetworkDDNS Configuration As required...

Page 28

Connecting the Machine
20
1
Note
❒In [Effective Protocol], check that the protocol you want to use is set to [Active].
❒[IEEE 802.11b] and [LAN Type] are displayed when the wireless LAN interface
board is installed. If both Ethernet and wireless LAN (IEEE 802.11b) are con-
nected, the selected interface takes precedence.
❒[SMTP Server] and [Fax E-mail Account] must be specified in order to use the
send function.
❒When [POP before SMTP] is set to [On], also make setting for [Reception Protocol]
and [POP3...

Page 29

Network Settings
21
1
Note
❒In [Effective Protocol], check that the protocol you want to use is set to [Active].
❒[LAN Type] is displayed when the wireless LAN interface board is installed. If
both ethernet and wireless LAN (IEEE 802.11b) are connected, the selected in-
terface takes precedence.
❒When [POP before SMTP] is set to [On], also make setting for [Reception Protocol]
and [POP3 / IMAP4 Settings].
❒When setting [POP before SMTP] to [On], check[POP3] port number in [E-mail
Communication Port]....

Page 30

Connecting the Machine
22
1
IEEE 1394 (IPv4 over 1394)
This section lists the settings required for sending e-mail with IEEE 1394 inter-
face cable.
For details about how to specify the settings, see “Interface Settings” and “File
Transfer”.
Note
❒[IEEE 1394] is displayed when the IEEE 1394 interface board is installed.
❒In [Effective Protocol], check that the protocol you want to use is set to [Active].
❒When [POP before SMTP] is set to [On], also make setting for [Reception Protocol]
and [POP3 / IMAP4...
Start reading Ricoh Aficio MP C2500 User Manual

Related Manuals for Ricoh Aficio MP C2500 User Manual

All Ricoh manuals