Home > Ricoh > Printer > Ricoh Aficio MP C2500e1 User Manual

Ricoh Aficio MP C2500e1 User Manual

    Download as PDF Print this page Share this page

    Have a look at the manual Ricoh Aficio MP C2500e1 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 127 Ricoh manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    							Network Settings
    33
    1
    Note
    ❒In [Effective Protocol], check that the protocol you want to use is set to [Active].
    ❒[LAN Type] is displayed when the wireless LAN interface board is installed.
    When both Ethernet and wireless LAN (IEEE 802.11b) are connected, the se-
    lected interface takes precedence.
    Reference
    p.58 “Interface Settings”
    IEEE 1394 (IPv4 over 1394)
    This section lists the settings required for using Document Server function with
    IEEE 1394 interface cable.
    For details about how to specify the settings, see “Interface Settings”.
    Note
    ❒[IEEE 1394] is displayed when the IEEE 1394 interface board is installed.
    ❒In [Effective Protocol], check that the protocol you want to use is set to [Active].
    Reference
    p.58 “Interface Settings”
    Menu User Tool Setting Requirements
    Interface Settings/IEEE 1394IPv4 Address Neccessary
    Interface Settings/IEEE 1394DDNS Configuration As required
    Interface Settings/IEEE 1394Host Name As required
    Interface Settings/IEEE 1394Domain Name As required
    Interface Settings/IEEE 1394WINS Configuration As required
    Interface Settings/IEEE 1394IPv4 over 1394 Neccessary
    Interface Settings/NetworkIPv4 Gateway Address As required
    Interface Settings/NetworkDNS Configuration As required
    Interface Settings/NetworkEffective Protocol Neccessary
    Downloaded From ManualsPrinter.com Manuals 
    						
    							Connecting the Machine
    34
    1
    IEEE 802.11b (wireless LAN)
    This section lists the settings required for using Document Server function with
    IEEE 802.11b (wireless LAN).
    For details about how to specify the settings, see “Interface Settings”.
    Note
    ❒In [Effective Protocol], check that the protocol you want to use is set to [Active].
    ❒[IEEE 802.11b] and [LAN Type] are displayed when the wireless LAN interface
    board is installed. When both Ethernet and wireless LAN (IEEE 802.11b) are
    connected, the selected interface takes precedence.
    Reference
    p.58 “Interface Settings”
    Menu User Tool Setting Requirements
    Interface Settings/NetworkMachine IPv4 Address Neccessary
    Interface Settings/NetworkIPv4 Gateway Address As required
    Interface Settings/NetworkDNS Configuration As required
    Interface Settings/NetworkDDNS Configuration As required
    Interface Settings/NetworkDomain Name As required
    Interface Settings/NetworkWINS Configuration As required
    Interface Settings/NetworkEffective Protocol Neccessary
    Interface Settings/NetworkLAN Type As required/Neccessary
    Interface Settings/NetworkPermit SNMPv3 Communication As required
    Interface Settings/NetworkPermit SSL/TLS Communication As required
    Interface Settings/NetworkHost Name As required
    Interface Settings/IEEE 802.11bCommunication Mode Neccessary
    Interface Settings/IEEE 802.11bSSID Setting As required
    Interface Settings/IEEE 802.11bChannel As required
    Interface Settings/IEEE 802.11bSecurity Method As required
    Interface Settings/IEEE 802.11bTransmission Speed As required
    Downloaded From ManualsPrinter.com Manuals 
    						
    							Network Settings
    35
    1
    Using Utilities to Make Network Settings
    You can also specify network settings using utilities such as Web Image Monitor,
    SmartDeviceMonitor for Admin, and telnet.
    Note
    ❒For details about using Web Image Monitor, see “Using Web Image Moni-
    tor”, Network Guide.
    ❒For details about using SmartDeviceMonitor for Admin, see “Using SmartDe-
    viceMonitor for Admin”, Network Guide.
    ❒For Details about using telnet, see “Remote Maintenance”, Network Guide.
    Reference
    “Using Web Image Monitor”, Network Guide
    “Using SmartDeviceMonitor for Admin”, Network Guide
    “Remote Maintenance by telnet”, Network Guide
    Interface Settings
    Change settings by using Web Image Monitor, SmartDeviceMonitor for Admin,
    and telnet.
    ❖[Network] → [Machine IPv4 Address] → [Auto-Obtain (DHCP)]
     Web Image Monitor:Can be used for specifying the setting.
     SmartDeviceMonitor for Admin:Can be used for specifying the setting.
     telnet:Can be used for specifying the setting.
    ❖[Network] → [Machine IPv4 Address] → [Specify] → [IPv4 Address]
     Web Image Monitor:Can be used for specifying the setting.
     SmartDeviceMonitor for Admin:Can be used for specifying the setting.
     telnet:Can be used for specifying the setting.
    ❖[Network] → [Machine IPv4 Address] → [Specify] → [Sub-net Mask]
     Web Image Monitor:Can be used for specifying the setting.
     SmartDeviceMonitor for Admin:Can be used for specifying the setting.
     telnet:Can be used for specifying the setting.
    ❖[Network] → [IPv4 Gateway Address]
     Web Image Monitor:Can be used for specifying the setting.
     SmartDeviceMonitor for Admin:Can be used for specifying the setting.
     telnet:Can be used for specifying the setting.
    Downloaded From ManualsPrinter.com Manuals 
    						
    							Connecting the Machine
    36
    1
    ❖[Network] → [Machine IPv6 Address] → [Manual Configuration Address]
     Web Image Monitor:Can be used for specifying the setting.
     SmartDeviceMonitor for Admin:Cannot be used for specifying the setting.
     telnet:Can be used for specifying the setting.
    ❖[Network] → [IPv6 Stateless Address Autoconfiguration]
     Web Image Monitor:Can be used for specifying the setting.
     SmartDeviceMonitor for Admin:Cannot be used for specifying the setting.
     telnet:Can be used for specifying the setting.
    ❖[Network] → [DNS Configuration] → [Auto-Obtain (DHCP)]
     Web Image Monitor:Can be used for specifying the setting.
     SmartDeviceMonitor for Admin:Cannot be used for specifying the setting.
     telnet:Can be used for specifying the setting.
    ❖[Network] → [DNS Configuration] → [Specify] → [DNS Server1-3]
     Web Image Monitor:Can be used for specifying the setting.
     SmartDeviceMonitor for Admin:Cannot be used for specifying the setting.
     telnet:Can be used for specifying the setting.
    ❖[Network] → [DDNS Configuration]
     Web Image Monitor:Can be used for specifying the setting.
     SmartDeviceMonitor for Admin:Cannot be used for specifying the setting.
     telnet:Can be used for specifying the setting.
    ❖[Network] → [Domain Name] → [Auto-Obtain (DHCP)]
     Web Image Monitor:Can be used for specifying the setting.
     SmartDeviceMonitor for Admin:Cannot be used for specifying the setting.
     telnet:Can be used for specifying the setting.
    ❖[Network] → [Domain Name] → [Specify] → [Domain Name]
     Web Image Monitor:Can be used for specifying the setting.
     SmartDeviceMonitor for Admin:Cannot be used for specifying the setting.
     telnet:Can be used for specifying the setting.
    ❖[Network] → [WINS Configuration] → [On] → [Primary WINS Server]
     Web Image Monitor:Can be used for specifying the setting.
     SmartDeviceMonitor for Admin:Cannot be used for specifying the setting.
     telnet:Can be used for specifying the setting.
    Downloaded From ManualsPrinter.com Manuals 
    						
    							Network Settings
    37
    1
    ❖[Network] → [WINS Configuration] → [On] → [Secondary WINS Server]
     Web Image Monirot:Can be used for specifying the setting.
     SmartDeviceMonitor for Admin:Cannot be used for specifying the setting.
     telnet:Can be used for specifying the setting.
    ❖[Network] → [WINS Configuration] → [On] → [Scope ID]
     Web Image Monitor:Can be used for specifying the setting.
     SmartDeviceMonitor for Admin:Cannot be used for specifying the setting.
     telnet:Can be used for specifying the setting.
    ❖[Network] → [Effective Protocol] → [IPv4]
     Web Image Monitor:Can be used for specifying the setting.
     SmartDeviceMonitor for Admin:You can make the TCP/IP settings if
    SmartDeviceMonitor for Admin is communicating with the machine using
    IPX/SPX.
     telnet:Can be used for specifying the setting.
    ❖[Network] → [Effective Protocol] → [IPv6]
     Web Image Monitor:Can be used for specifying the setting.
     SmartDeviceMonitor for Admin:Can be used for specifying the setting.
     telnet:Can be used for specifying the setting.
    ❖[Network] → [Effective Protocol] → [NetWare]
     Web Image Monitor:Can be used for specifying the setting.
     SmartDeviceMonitor for Admin:You can make the IPX/SPX settings if
    SmartDeviceMonitor for Admin is communicating with the machine using
    TCP/IP.
     telnet:Can be used for specifying the setting.
    ❖[Network] → [Effective Protocol] → [SMB]
     Web Image Monitor:Can be used for specifying the setting.
     SmartDeviceMonitor for Admin:Can be used for specifying the setting.
     telnet:Can be used for specifying the setting.
    ❖[Network] → [Effective Protocol] → [AppleTalk]
     Web Image Monitor:Can be used for specifying the setting.
     SmartDeviceMonitor for Admin:Can be used for specifying the setting.
     telnet:Can be used for specifying the setting.
    ❖[Network] → [NCP Delivery Protocol]
     Web Image Monitor:Can be used for specifying the setting.
     SmartDeviceMonitor for Admin:Can be used for specifying the setting.
     telnet:Cannot be used for specifying the setting.
    Downloaded From ManualsPrinter.com Manuals 
    						
    							Connecting the Machine
    38
    1
    ❖[Network] → [NW Frame Type] → [Auto Select]
     Web Image Monitor:Can be used for specifying the setting.
     SmartDeviceMonitor for Admin:Cannot be used for specifying the setting.
     telnet:Can be used for specifying the setting.
    ❖[Network] → [NW Frame Type] → [Ethernet II]
     Web Image Monitor:Can be used for specifying the setting.
     SmartDeviceMonitor for Admin:Cannot be used for specifying the setting.
     telnet:Can be used for specifying the setting.
    ❖[Network] → [NW Frame Type] → [Ethernet 802.2]
     Web Image Monitor:Can be used for specifying the setting.
     SmartDeviceMonitor for Admin:Cannot be used for specifying the setting.
     telnet:Can be used for specifying the setting.
    ❖[Network] → [NW Frame Type] → [Ethernet 802.3]
     Web Image Monitor:Can be used for specifying the setting.
     SmartDeviceMonitor for Admin:Cannot be used for specifying the setting.
     telnet:Can be used for specifying the setting.
    ❖[Network] → [NW Frame Type] → [Ethernet SNAP]
     Web Image Monitor:Can be used for specifying the setting.
     SmartDeviceMonitor for Admin:Cannot be used for specifying the setting.
     telnet:Can be used for specifying the setting.
    ❖[Network] → [SMB Computer Name]
     Web Image Monitor:Can be used for specifying the setting.
     SmartDeviceMonitor for Admin:Cannot be used for specifying the setting.
     telnet:Can be used for specifying the setting.
    ❖[Network] → [SMB Work Group]
     Web Image Monitor:Can be used for specifying the setting.
     SmartDeviceMonitor for Admin:Cannot be used for specifying the setting.
     telnet:Can be used for specifying the setting.
    ❖[Network] → [Ethernet Speed]
     Web Image Monitor:Cannot be used for specifying the setting.
     SmartDeviceMonitor for Admin:Cannot be used for specifying the setting.
     telnet:Cannot be used for specifying the setting.
    Downloaded From ManualsPrinter.com Manuals 
    						
    							Network Settings
    39
    1
    ❖[Network] → [LAN Type] → [Ethernet]
     Web Image Monitor:Can be used for specifying the setting.
     SmartDeviceMonitor for Admin:Cannot be used for specifying the setting.
     telnet:Can be used for specifying the setting.
    ❖[Network] → [LAN Type] → [IEEE 802.11b]
     Web Image Monitor:Can be used for specifying the setting.
     SmartDeviceMonitor for Admin:Cannot be used for specifying the setting.
     telnet:Can be used for specifying the setting.
    ❖[Network] → [Host Name]
     Web Image Monitor:Can be used for specifying the setting.
     SmartDeviceMonitor for Admin:Can be used for specifying the setting.
     telnet:Can be used for specifying the setting.
    ❖[Network] → [Machine Name]
     Web Image Monitor:Can be used for specifying the setting.
     SmartDeviceMonitor for Admin:Cannot be used for specifying the setting.
     telnet:Can be used for specifying the setting.
    ❖[IEEE 1394] → [IPv4 Address] → [Auto-Obtain (DHCP)]
     Web Image Monitor:Can be used for specifying the setting.
     SmartDeviceMonitor for Admin:Cannot be used for specifying the setting.
     telnet:Can be used for specifying the setting.
    ❖[IEEE 1394] → [IPv4 Address] → [Specify] → [Machine IPv4 Address]
     Web Image Monitor:Can be used for specifying the setting.
     SmartDeviceMonitor for Admin:Cannot be used for specifying the setting.
     telnet:Can be used for specifying the setting.
    ❖[IEEE 1394] → [IPv4 Address] → [Specify] → [Sub-net Mask]
     Web Image Monitor:Can be used for specifying the setting.
     SmartDeviceMonitor for Admin:Cannot be used for specifying the setting.
     telnet:Can be used for specifying the setting.
    ❖[IEEE 1394] → [DDNS Configuration]
     Web Image Monitor:Can be used for specifying the setting.
     SmartDeviceMonitor for Admin:Cannot be used for specifying the setting.
     telnet:Can be used for specifying the setting.
    Downloaded From ManualsPrinter.com Manuals 
    						
    							Connecting the Machine
    40
    1
    ❖[IEEE 1394] → [IPv4 over 1394]
     Web Image Monitor:Can be used for specifying the setting.
     SmartDeviceMonitor for Admin:Cannot be used for specifying the setting.
     telnet:Can be used for specifying the setting.
    ❖[IEEE 1394] → [WINS Configuration] → [On] → [Primary WINS Server]
     Web Image Monitor:Can be used for specifying the setting.
     SmartDeviceMonitor for Admin:Cannot be used for specifying the setting.
     telnet:Can be used for specifying the setting.
    ❖[IEEE 1394] → [WINS Configuration] → [On] → [Secondary WINS Server]
     Web Image Monitor:Can be used for specifying the setting.
     SmartDeviceMonitor for Admin:Cannot be used for specifying the setting.
    ❖[IEEE 1394] → [WINS Configuration] → [On] → [Scope ID]
     Web Image Monitor:Can be used for specifying the setting.
     SmartDeviceMonitor for Admin:Cannot be used for specifying the setting.
     telnet:Can be used for specifying the setting.
    ❖[IEEE 1394] → [Host Name]
     Web Image Monitor:Can be used for specifying the setting.
     SmartDeviceMonitor for Admin:Cannot be used for specifying the setting.
     telnet:Can be used for specifying the setting.
    ❖[IEEE 1394] → [Domain Name]
     Web Image Monitor:Can be used for specifying the setting.
     SmartDeviceMonitor for Admin:Cannot be used for specifying the setting.
     telnet:Can be used for specifying the setting.
    ❖[IEEE 802.11b] → [Communication Mode]
     Web Image Monitor:Can be used for specifying the setting.
     SmartDeviceMonitor for Admin:Cannot be used for specifying the setting.
     telnet:Can be used for specifying the setting.
    ❖[IEEE 802.11b] → [SSID Setting]
     Web Image Monitor:Can be used for specifying the setting.
     SmartDeviceMonitor for Admin:Cannot be used for specifying the setting.
     telnet:Can be used for specifying the setting.
    Downloaded From ManualsPrinter.com Manuals 
    						
    							Network Settings
    41
    1
    ❖[IEEE 802.11b] → [Channel]
     Web Image Monitor:Can be used for specifying the setting.
     SmartDeviceMonitor for Admin:Cannot be used for specifying the setting.
     telnet:Can be used for specifying the setting.
    ❖[IEEE 802.11b] → [Security Method]
     Web Image Monitor:Can be used for specifying the setting.
     SmartDeviceMonitor for Admin:Cannot be used for specifying the setting.
     telnet:Can be used for specifying the setting.
    ❖[IEEE 802.11b] → [Transmission Speed]
     Web Image Monitor:Cannot be used for specifying the setting.
     SmartDeviceMonitor for Admin:Cannot be used for specifying the setting.
     telnet:Can be used for specifying the setting.
    ❖[File Transfer] → [SMTP Server]
     Web Image Monitor:Can be used for specifying the setting.
     SmartDeviceMonitor for Admin:Cannot be used for specifying the setting.
     telnet:Cannot be used for specifying the setting.
    ❖[File Transfer] → [SMTP Authentication]
     Web Image Monitor:Can be used for specifying the setting.
     SmartDeviceMonitor for Admin:Cannot be used for specifying the setting.
     telnet:Cannot be used for specifying the setting.
    ❖[File Transfer] → [POP before SMTP]
     Web Image Monitor:Can be used for specifying the setting.
     SmartDeviceMonitor for Admin:Cannot be used for specifying the setting.
     telnet:Cannot be used for specifying the setting.
    ❖[File Transfer] → [Reception Protocol]
     Web Image Monitor:Can be used for specifying the setting.
     SmartDeviceMonitor for Admin:Cannot be used for specifying the setting.
     telnet:Cannot be used for specifying the setting.
    ❖[File Transfer] → [POP3 / IMAP4 Settings]
     Web Image Monitor:Can be used for specifying the setting.
     SmartDeviceMonitor for Admin:Cannot be used for specifying the setting.
     telnet:Cannot be used for specifying the setting.
    Downloaded From ManualsPrinter.com Manuals 
    						
    							Connecting the Machine
    42
    1
    ❖[File Transfer] → [Administrators E-mail Address]
     Web Image Monitor:Can be used for specifying the setting.
     SmartDeviceMonitor for Admin:Cannot be used for specifying the setting.
     telnet:Cannot be used for specifying the setting.
    ❖[File Transfer] → [E-mail Communication Port]
     Web Image Monitor:Can be used for specifying the setting.
     SmartDeviceMonitor for Admin:Cannot be used for specifying the setting.
     telnet:Cannot be used for specifying the setting.
    ❖[File Transfer] → [E-mail Reception Interval]
     Web Image Monitor:Can be used for specifying the setting.
     SmartDeviceMonitor for Admin:Cannot be used for specifying the setting.
     telnet:Cannot be used for specifying the setting.
    ❖[File Transfer] → [Max. Reception E-mail Size]
     Web Image Monitor:Can be used for specifying the setting.
     SmartDeviceMonitor for Admin:Cannot be used for specifying the setting.
     telnet:Cannot be used for specifying the setting.
    ❖[File Transfer] → [E-mail Storage in Server]
     Web Image Monitor:Can be used for specifying the setting.
     SmartDeviceMonitor for Admin:Cannot be used for specifying the setting.
     telnet:Cannot be used for specifying the setting.
    ❖[File Transfer] → [Default User Name/Password (Send)]
     Web Image Monitor:Can be used for specifying the setting.
     SmartDeviceMonitor for Admin:Cannot be used for specifying the setting.
     telnet:Cannot be used for specifying the setting.
    ❖[File Transfer] → [Fax E-mail Account]
     Web Image Monitor:Cannot be used for specifying the setting.
     SmartDeviceMonitor for Admin:Cannot be used for specifying the setting.
     telnet:Cannot be used for specifying the setting.
    Downloaded From ManualsPrinter.com Manuals 
    						
    All Ricoh manuals Comments (0)

    Related Manuals for Ricoh Aficio MP C2500e1 User Manual