Home > Ricoh > Printer > Ricoh Aficio MP C3500 User Manual

Ricoh Aficio MP C3500 User Manual

    Download as PDF Print this page Share this page

    Have a look at the manual Ricoh Aficio MP C3500 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 127 Ricoh manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    							Network Settings
    31
    1
    Reference
    p.59 “Interface Settings”
    p.69 “File Transfer”
    Settings Required to Use Network TWAIN Scanner
    This section lists the settings required for using TWAIN Scanner under the net-
    work environment.
    Ethernet
    This section lists the settings required for using network TWAIN Scanner with
    an Ethernet connection.
    For details about how to specify the settings, see Interface Settings.
    Note
    ❒For the Effective Protocol setting, check that the protocol you want to use is
    set to [Active].
    ❒[LAN Type] is displayed when the wireless LAN interface board is installed.
    When both Ethernet and wireless LAN (IEEE 802.11b) are connected, the se-
    lected interface takes precedence.
    Reference
    p.59 “Interface Settings”
    Menu User Tool Setting Requirements
    Interface Settings/Network Machine IPv4 Address Necessary
    Interface Settings/Network IPv4 Gateway Address As required
    Interface Settings/Network DNS Configuration As required
    Interface Settings/Network DDNS Configuration As required
    Interface Settings/Network Domain Name As required
    Interface Settings/Network WINS Configuration As required
    Interface Settings/Network Effective Protocol Necessary
    Interface Settings/Network LAN Type Necessary
    Interface Settings/Network Ethernet Speed As required
    Interface Settings/Network Permit SNMPv3 Communication As required
    Interface Settings/Network Permit SSL/TLS Communication As required
    Interface Settings/Network Host Name As required
    Downloaded From ManualsPrinter.com Manuals 
    						
    							Connecting the Machine
    32
    1
    IEEE 1394 (IPv4 over 1394)
    This section lists the settings required for using network TWAIN Scanner with
    an IEEE 1394 connection.
    For details about how to specify the settings, see Interface Settings and File
    Transfer.
    Note
    ❒[IEEE 1394] is displayed when the IEEE 1394 interface board is installed.
    ❒For the Effective Protocol setting, check that the protocol you want to use is
    set to [Active].
    Reference
    p.59 “Interface Settings”
    Menu User Tool Setting Requirements
    Interface Settings/IEEE 1394 IPv4  Address Necessary
    Interface Settings/IEEE 1394 DDNS  Configuration As  required
    Interface Settings/IEEE 1394 Host  Name As  required
    Interface Settings/IEEE 1394 Domain  Name As  required
    Interface Settings/IEEE 1394 WINS  Configuration As  required
    Interface Settings/IEEE 1394 IPv4  over  1394 Necessary
    Interface Settings/Network IPv4 Gateway Address As required
    Interface Settings/Network DNS Configuration As required
    Interface Settings/Network Effective Protocol Necessary
    Downloaded From ManualsPrinter.com Manuals 
    						
    							Network Settings
    33
    1
    IEEE 802.11b (wireless LAN)
    This section lists the settings required for using network TWAIN Scanner with
    an IEEE 802.11b (wireless LAN) connection.
    For details about how to specify the settings, see Interface Settings.
    Note
    ❒For the Effective Protocol setting, check that the protocol you want to use is
    set to [Active].
    ❒[IEEE 802.11b] and [LAN Type] are displayed when the wireless LAN interface
    board is installed. When both Ethernet and wireless LAN (IEEE 802.11b) are
    connected, the selected interface takes precedence.
    Reference
    p.59 “Interface Settings”
    Menu User Tool Setting Requirements
    Interface Settings/Network Machine IPv4 Address Necessary
    Interface Settings/Network IPv4 Gateway Address As required
    Interface Settings/Network DNS Configuration As required
    Interface Settings/Network DDNS Configuration As required
    Interface Settings/Network Domain Name As required
    Interface Settings/Network WINS Configuration As required
    Interface Settings/Network Effective Protocol Necessary
    Interface Settings/Network LAN Type Necessary
    Interface Settings/Network Permit SNMPv3 Communication As required
    Interface Settings/Network Permit SSL/TLS Communication As required
    Interface Settings/Network Host Name As required
    Interface Settings/
    IEEE 802.11bCommunication Mode Necessary
    Interface Settings/
    IEEE 802.11bSSID Setting As required
    Interface Settings/
    IEEE 802.11bChannel As required
    Interface Settings/
    IEEE 802.11bSecurity Method As required
    Interface Settings/
    IEEE 802.11bTransmission Speed As required
    Downloaded From ManualsPrinter.com Manuals 
    						
    							Connecting the Machine
    34
    1
    Settings Required to Use Document Server
    This section lists the settings required for using Document Server function under
    the network environment.
    Ethernet
    This section lists the settings required for using Document Server function with
    an Ethernet connection.
    For details about how to specify the settings, see Interface Settings.
    Note
    ❒For the Effective Protocol setting, check that the protocol you want to use is
    set to [Active].
    ❒[LAN Type] is displayed when the wireless LAN interface board is installed.
    When both Ethernet and wireless LAN (IEEE 802.11b) are connected, the se-
    lected interface takes precedence.
    Reference
    p.59 “Interface Settings”
    Menu User Tool Setting Requirements
    Interface Settings/Network Machine IPv4 Address Necessary
    Interface Settings/Network IPv4 Gateway Address As required
    Interface Settings/Network DNS Configuration As required
    Interface Settings/Network DDNS Configuration As required
    Interface Settings/Network Domain Name As required
    Interface Settings/Network WINS Configuration As required
    Interface Settings/Network Effective Protocol Necessary
    Interface Settings/Network Ethernet Speed As required
    Interface Settings/Network LAN Type Necessary
    Interface Settings/Network Permit SNMPv3 Communication As required
    Interface Settings/Network Permit SSL/TLS Communication As required
    Interface Settings/Network Host Name As required
    Downloaded From ManualsPrinter.com Manuals 
    						
    							Network Settings
    35
    1
    IEEE 1394 (IPv4 over 1394)
    This section lists the settings required for using Document Server function with
    an IEEE 1394 connection.
    For details about how to specify the settings, see Interface Settings.
    Note
    ❒[IEEE 1394] is displayed when the IEEE 1394 interface board is installed.
    ❒For the Effective Protocol setting, check that the protocol you want to use is
    set to [Active].
    Reference
    p.59 “Interface Settings”
    Menu User Tool Setting Requirements
    Interface Settings/IEEE 1394 IPv4  Address Necessary
    Interface Settings/IEEE 1394 DDNS  Configuration As  required
    Interface Settings/IEEE 1394 Host  Name As  required
    Interface Settings/IEEE 1394 Domain  Name As  required
    Interface Settings/IEEE 1394 WINS  Configuration As  required
    Interface Settings/IEEE 1394 IPv4  over  1394 Necessary
    Interface Settings/Network IPv4 Gateway Address As required
    Interface Settings/Network DNS Configuration As required
    Interface Settings/Network Effective Protocol Necessary
    Downloaded From ManualsPrinter.com Manuals 
    						
    							Connecting the Machine
    36
    1
    IEEE 802.11b (wireless LAN)
    This section lists the settings required for using Document Server function with
    an IEEE 802.11b (wireless LAN) connection.
    For details about how to specify the settings, see Interface Settings.
    Note
    ❒For the Effective Protocol setting, check that the protocol you want to use is
    set to [Active].
    ❒[IEEE 802.11b] and [LAN Type] are displayed when the wireless LAN interface
    board is installed. When both Ethernet and wireless LAN (IEEE 802.11b) are
    connected, the selected interface takes precedence.
    Reference
    p.59 “Interface Settings”
    Menu User Tool Setting Requirements
    Interface Settings/Network Machine IPv4 Address Necessary
    Interface Settings/Network IPv4 Gateway Address As required
    Interface Settings/Network DNS Configuration As required
    Interface Settings/Network DDNS Configuration As required
    Interface Settings/Network Domain Name As required
    Interface Settings/Network WINS Configuration As required
    Interface Settings/Network Effective Protocol Necessary
    Interface Settings/Network LAN Type As required/Necessary
    Interface Settings/Network Permit SNMPv3 Communication As required
    Interface Settings/Network Permit SSL/TLS Communication As required
    Interface Settings/Network Host Name As required
    Interface Settings/
    IEEE 802.11bCommunication Mode Necessary
    Interface Settings/
    IEEE 802.11bSSID Setting As required
    Interface Settings/
    IEEE 802.11bChannel As required
    Interface Settings/
    IEEE 802.11bSecurity Method As required
    Interface Settings/
    IEEE 802.11bTransmission Speed As required
    Downloaded From ManualsPrinter.com Manuals 
    						
    							Network Settings
    37
    1
    Using Utilities to Make Network Settings
    You can also specify network settings using utilities such as Web Image Monitor,
    SmartDeviceMonitor for Admin, and telnet.
    Note
    ❒For details about using Web Image Monitor, see Using Web Image Monitor,
    Network Guide.
    ❒For details about using SmartDeviceMonitor for Admin, see Using SmartDe-
    viceMonitor for Admin, Network Guide.
    ❒For Details about using telnet, see Remote Maintenance, Network Guide.
    Reference
    Using Web Image Monitor, Network Guide
    Using SmartDeviceMonitor for Admin, Network Guide
    Remote Maintenance by telnet, Network Guide
    Interface Settings
    Change settings by using Web Image Monitor, SmartDeviceMonitor for Admin,
    and telnet.
    ❖[Network] → [Machine IPv4 Address] → [Auto-Obtain (DHCP)]
     Web Image Monitor: Can be used for specifying the setting.
     SmartDeviceMonitor for Admin: Can be used for specifying the setting.
     telnet: Can be used for specifying the setting.
    ❖[Network] → [Machine IPv4 Address] → [Specify] → [IPv4 Address]
     Web Image Monitor: Can be used for specifying the setting.
     SmartDeviceMonitor for Admin: Can be used for specifying the setting.
     telnet: Can be used for specifying the setting.
    ❖[Network] → [Machine IPv4 Address] → [Specify] → [Sub-net Mask]
     Web Image Monitor: Can be used for specifying the setting.
     SmartDeviceMonitor for Admin: Can be used for specifying the setting.
     telnet: Can be used for specifying the setting.
    ❖[Network] → [IPv4 Gateway Address]
     Web Image Monitor: Can be used for specifying the setting.
     SmartDeviceMonitor for Admin: Can be used for specifying the setting.
     telnet: Can be used for specifying the setting.
    Downloaded From ManualsPrinter.com Manuals 
    						
    							Connecting the Machine
    38
    1
    ❖[Network] → [Machine IPv6 Address] → [Manual Configuration Address]
     Web Image Monitor: Can be used for specifying the setting.
     SmartDeviceMonitor for Admin: Cannot be used for specifying the setting.
     telnet: Can be used for specifying the setting.
    ❖[Network] → [IPv6 Stateless Address Autoconfiguration]
     Web Image Monitor: Can be used for specifying the setting.
     SmartDeviceMonitor for Admin: Cannot be used for specifying the setting.
     telnet: Can be used for specifying the setting.
    ❖[Network] → [DNS Configuration] → [Auto-Obtain (DHCP)]
     Web Image Monitor: Can be used for specifying the setting.
     SmartDeviceMonitor for Admin: Cannot be used for specifying the setting.
     telnet: Can be used for specifying the setting.
    ❖[Network] → [DNS Configuration] → [Specify] → [DNS Server 1-3]
     Web Image Monitor: Can be used for specifying the setting.
     SmartDeviceMonitor for Admin: Cannot be used for specifying the setting.
     telnet: Can be used for specifying the setting.
    ❖[Network] → [DDNS Configuration]
     Web Image Monitor: Can be used for specifying the setting.
     SmartDeviceMonitor for Admin: Cannot be used for specifying the setting.
     telnet: Can be used for specifying the setting.
    ❖[Network] → [Domain Name] → [Auto-Obtain (DHCP)]
     Web Image Monitor: Can be used for specifying the setting.
     SmartDeviceMonitor for Admin: Cannot be used for specifying the setting.
     telnet: Can be used for specifying the setting.
    ❖[Network] → [Domain Name] → [Specify] → [Domain Name]
     Web Image Monitor: Can be used for specifying the setting.
     SmartDeviceMonitor for Admin: Cannot be used for specifying the setting.
     telnet: Can be used for specifying the setting.
    ❖[Network] → [WINS Configuration] → [On] → [Primary WINS Server]
     Web Image Monitor: Can be used for specifying the setting.
     SmartDeviceMonitor for Admin: Cannot be used for specifying the setting.
     telnet: Can be used for specifying the setting.
    Downloaded From ManualsPrinter.com Manuals 
    						
    							Network Settings
    39
    1
    ❖[Network] → [WINS Configuration] → [On] → [Secondary WINS Server]
     Web Image Monitor: Can be used for specifying the setting.
     SmartDeviceMonitor for Admin: Cannot be used for specifying the setting.
     telnet: Can be used for specifying the setting.
    ❖[Network] → [WINS Configuration] → [On] → [Scope ID]
     Web Image Monitor: Can be used for specifying the setting.
     SmartDeviceMonitor for Admin: Cannot be used for specifying the setting.
     telnet: Can be used for specifying the setting.
    ❖[Network] → [Effective Protocol] → [IPv4]
     Web Image Monitor: Can be used for specifying the setting.
     SmartDeviceMonitor for Admin: You can specify the TCP/IP settings if
    SmartDeviceMonitor for Admin is communicating with the machine using
    IPX/SPX.
     telnet: Can be used for specifying the setting.
    ❖[Network] → [Effective Protocol] → [IPv6]
     Web Image Monitor: Can be used for specifying the setting.
     SmartDeviceMonitor for Admin: Cannot be used for specifying the setting.
     telnet: Can be used for specifying the setting.
    ❖[Network] → [Effective Protocol] → [NetWare]
     Web Image Monitor: Can be used for specifying the setting.
     SmartDeviceMonitor for Admin: You can specify the IPX/SPX settings if
    SmartDeviceMonitor for Admin is communicating with the machine using
    TCP/IP.
     telnet: Can be used for specifying the setting.
    ❖[Network] → [Effective Protocol] → [SMB]
     Web Image Monitor: Can be used for specifying the setting.
     SmartDeviceMonitor for Admin: Can be used for specifying the setting.
     telnet: Can be used for specifying the setting.
    ❖[Network] → [Effective Protocol] → [AppleTalk]
     Web Image Monitor: Can be used for specifying the setting.
     SmartDeviceMonitor for Admin: Can be used for specifying the setting.
     telnet: Can be used for specifying the setting.
    ❖[Network] → [NCP Delivery Protocol]
     Web Image Monitor: Can be used for specifying the setting.
     SmartDeviceMonitor for Admin: Can be used for specifying the setting.
     telnet: Cannot be used for specifying the setting.
    Downloaded From ManualsPrinter.com Manuals 
    						
    							Connecting the Machine
    40
    1
    ❖[Network] → [NW Frame Type] → [Auto Select]
     Web Image Monitor: Can be used for specifying the setting.
     SmartDeviceMonitor for Admin: Cannot be used for specifying the setting.
     telnet: Can be used for specifying the setting.
    ❖[Network] → [NW Frame Type] → [Ethernet II]
     Web Image Monitor: Can be used for specifying the setting.
     SmartDeviceMonitor for Admin: Cannot be used for specifying the setting.
     telnet: Can be used for specifying the setting.
    ❖[Network] → [NW Frame Type] → [Ethernet 802.2]
     Web Image Monitor: Can be used for specifying the setting.
     SmartDeviceMonitor for Admin: Cannot be used for specifying the setting.
     telnet: Can be used for specifying the setting.
    ❖[Network] → [NW Frame Type] → [Ethernet 802.3]
     Web Image Monitor: Can be used for specifying the setting.
     SmartDeviceMonitor for Admin: Cannot be used for specifying the setting.
     telnet: Can be used for specifying the setting.
    ❖[Network] → [NW Frame Type] → [Ethernet SNAP]
     Web Image Monitor: Can be used for specifying the setting.
     SmartDeviceMonitor for Admin: Cannot be used for specifying the setting.
     telnet: Can be used for specifying the setting.
    ❖[Network] → [SMB Computer Name]
     Web Image Monitor: Can be used for specifying the setting.
     SmartDeviceMonitor for Admin: Cannot be used for specifying the setting.
     telnet: Can be used for specifying the setting.
    ❖[Network] → [SMB Work Group]
     Web Image Monitor: Can be used for specifying the setting.
     SmartDeviceMonitor for Admin: Cannot be used for specifying the setting.
     telnet: Can be used for specifying the setting.
    ❖[Network] → [Ethernet Speed]
     Web Image Monitor: Cannot be used for specifying the setting.
     SmartDeviceMonitor for Admin: Cannot be used for specifying the setting.
     telnet: Cannot be used for specifying the setting.
    Downloaded From ManualsPrinter.com Manuals 
    						
    All Ricoh manuals Comments (0)

    Related Manuals for Ricoh Aficio MP C3500 User Manual