Ricoh Projector PJ LW3000ST User Manual

							39
 Sharpness
Adjust the sharpness of the image.
Press the ◄ button to decrease the sharpness.
Press the ► button to increase the sharpness.
 Saturation
Adjust a video image from black and white to fully saturated color.
Press the ◄ button to decrease the amount of saturation in the 
image.
Press the ► button to increase the amount of saturation in the 
image.
 Hue
Adjust the color balance of red and green.
Press the ◄ button to increase the amount of green in the im-
age.
Press the ► button to increase the amount of red in the image.
 Gamma
 Adjust the gamma table when the dark areas or bright areas of the 
image are not clear.
Press the ► to emphasize details in dark areas of the image.
Press the ◄ to emphasize details in bright areas of the image.
 Color Temp
 
Select the color temperature. This function is only available when 
the “Color Mode” setting is set to “PC”.
  
Low: The screen image looks warmer.
  
High: The screen image looks colder.
	“Sharpness”, “Sat-uration” and “Hue” functions are only supported under video mode.
English 
English
User Settings
English   
						

							40
Screen
 Aspect Ratio
Auto: Keep the image with original width-height ratio and maxi-
mize the image to fit native horizontal or vertical pixels.
4:3: The image will be scaled to fit the screen and displayed 
using a 4:3 ratio.
16:9: The image will be scaled to fit the width of the screen and 
the height adjusted to display the image using a 16:9 ratio.
16:10: The image will be scaled to fit the width of the screen 
and the height adjusted to display the image using a 16:10 ratio.
Fill Screen : The image will be scaled to fit full screen.
 Phase
Synchronize the signal timing of the display with the graphic card. 
If the image appears to be unstable or flickers, use this function to 
correct it.
 Clock
Adjust to achieve an optimal image when there is a vertical flicker 
in the image.
 H. Position
Press the ◄ button to move the image left.
Press the ► button to move the image right.
 V. Position
Press the ◄ button to move the image down.
Press the ► button to move the image up.
	“H. Position” and “V. Position” rang-es will depend on input source. 
English
User Settings   
						

							41
 Digital Zoom
Press the ◄ button to reduce the size of an image.
Press the ► button to magnify an image on the projection 
screen.
 V Keystone
Press the ◄ or ► button to adjust image distortion vertically. If 
the image looks trapezoidal, this option can help make the image 
rectangular.
 Ceiling Mount
Front: The image is projected straight on the screen.
Front Ceiling: This is the default selection. When selected, the 
image will turn upside down.
Rear: When selected, the image will appear reversed.
Rear Ceiling: When selected, the image will appear reversed in 
upside down position.
English 
English
User Settings
English   
						

							42
Setting
 Language
Choose the multilingual OSD menu. Press the ◄ or ► button 
into the sub menu and then use the ▲ or ▼ button to select your 
preferred language. Press ► on the remote control to finalize the 
selection.
 Menu Location
Choose the menu location on the display screen.
 Closed Caption
Use this function to enable close caption menu. Select an appropri-
ate closed captions option: Off, CC1, CC2, CC3, and CC4.
 VGA Output (Standby)
Choose “On” to enable VGA OUT connection. 
English
User Settings   
						

							43
 VGA-2 (Function)
Input: Choose “Input” to let the VGA port works as a VGA input 
function.
Output: Choose “Output” to enable the VGA Out function once 
the projector is powered on.
 Test Pattern
Display a test pattern.
 Reset
Choose “Yes” to return the parameters on all menus to the factory 
default settings.
English 
English
User Settings
English   
						

							44
Volume
 Speaker
Choose “On” to enable the speaker.
Choose “Off” to disable the speaker.
 Line Out
Choose “On” to enable the line out function.
Choose “Off” to disable the line out function.
 Microphone
Choose “On” to enable the microphone.
Choose “Off” to disable the microphone.
 Mute
Choose “On” to turn mute on.
Choose “Off” to turn mute off.
 Volume
Press the ◄ button to decrease the volume.
Press the ► button to increase the volume.
 Microphone Volume
Press the ◄ button to decrease the microphone volume.
Press the ► button to increase the microphone volume. 
English
User Settings   
						

							45
Options
 Logo
Use this function to set the desired startup screen. If changes are 
made they will take effect the next time the projector is powered 
on.
Default: The default startup screen.
User: Use stored picture from “Logo Capture” function.
 Logo Capture
Press ► button to capture an image of the picture currently dis-
played on screen.
 Auto Source
On: The projector will search for other signals if the current input 
signal is lost.
Off: The projector will only search current input connection.
 Input
Press ► button to enable/disable input sources. The projector will 
not search for inputs that are not selected.
	For successful logo capture, please ensure that the on-screen image does not exceed the projector’s native resolution. (WXGA:1280x800).
	“Logo Capture” is not available when 3D is enabled.
	Before active this function, it is recommended that “Aspect Ratio” is set to the “Auto”.
English 
English
User Settings
English   
						

							46
 Auto Power Off (Min)
Sets the countdown timer interval. The countdown timer will start, 
when there is no signal being sent to the projector. The projector 
will automatically power off when the countdown has finished (in 
minutes).
 LASER Settings
Refer to page 47.
 High Altitude
On: The built-in fans run at high speed. Select this option when 
using the projector at altitudes above 5000 feet/1524 meters or 
higher.
Off: The built-in fans automatically run at a variable speed ac-
cording to the internal temperature.
 Filters Remind (Hour)
Filters Remind (Hour): Set the filter reminder time.
Cleaning Up Remind: Select “Yes” to reset the dust filter hour 
counter after replacing or cleaning the dust filter.
 Information
Display the projector information for source, resolution, software 
version, and aspect ratio on the screen. 
English
User Settings   
						

							47
Options |  
LASER Settings
 LASER Hours Used (Normal)
Display the projection time of normal mode.
 LASER Hours Used (ECO)
Display the projection time of ECO mode.
 LASER Power Mode
Normal: Normal mode.
ECO: Use this function to dim the projector light source which 
will lower power consumption and extend the light source life.
English 
English
User Settings
English   
						

							48
3D
 3D
Auto: When a HDMI 1.4a 3D timing identification signal is de-
tected, the 3D image is selected automatically.
Choose “On” to enable 3D function.
Choose “Off” to disable 3D function.
 3D Invert
If you see a discrete or overlapping image while wearing DLP 3D 
glasses, you may need to execute “Invert” to get best match of left/
right image sequence to get the correct image.
 3D Format
Use this feature to select the 3D format. Options are: “Frame 
Packing”, “Side-by-Side (Half)”, “Top and Bottom”, “Frame Sequen-
tial”, and “Field Sequential”.
 1080p@24
Use this feature to select 96 or 144Hz refresh rate as using 3D 
glasses in the1080p @ 24 frame packing.
	“Frame Packing” is supported the DLP Link 3D input signals from VGA / HDMI connector.
	“Frame Se-quential” / “Field Sequential” are supported the HQFS 3D input signals from Composite/S-Video connector connector.
	“Frame Pack-ing” / “Side-by-Side(Half)” / “Top and Bottom” are supported from HDMI 1.4a 3D input signals. 
English
User Settings