Ricoh Projector PJ WX4152NI User Manual

							Item
Default
Transmission WEP Key Number Select the Key number used to authenticate and encrypt transmissions
when you select [WEP] in [Encryption Method].• 1
•
2
• 3
• 4 1
Network Key Enter the WEP key when you select [Open System] or [WEP Shared
Key] in [Authentication Method] and select [WEP] in [Encryption
Method].
When using 64 bit WEP, up to 10 characters can be used for
hexadecimal and up to 5 characters for ASCII. When using 128 bit
WEP, up to 26 characters can be used for hexadecimal and up to 13
characters for ASCII.
Enter PSK when [WPA/WPA2-PSK] or [WPA2-PSK] is selected in
[Authentication Method].
When using a PSK, up to 64 characters can be used for hexadecimal
and 8 to 63 characters for ASCII. (blank)
EAP Type Specify the WPA/WPA2-EAP type when [WPA/WPA2-EAP] or
[WPA2-EAP] is selected in [Authentication Method]. You can select
EAP-TLS or EAP-PEAP.• EAP-TLS
A client certificate and a CA certificate must be imported to the
projector.
•

EAP-PEAP
A CA certificate must be imported to the projector. EAP-TLS
Import Client Certificate Imports the client certificate used for WPA/WPA2-EAP or WPA2-EAP
when [EAP-TLS] is selected in [EAP Type]. - Network Settings Menu
129  
						

							Item
Default
Client Certificate User Name Enter the client certificate user name used for WPA/WPA2-EAP or
WPA2-EAP when [EAP-TLS] is selected in [EAP Type].
This setting is optional. If it is blank, the default value of the certificate
will be used to decrypt the certificate. (blank)
Client Certificate List Displays a list of imported client certificates. -
Import CA Certificate Imports a CA certificate when [WPA/WPA2-EAP] or [WPA2-EAP] is
selected in [Authentication Method]. -
CA Certificate List Displays a list of imported CA certificates. -
Delete Client/CA Certificate Deletes all imported client and CA certificates. -
MS-CHAP v2 User Name Enter the MS-CHAP v2 user name when [EAP-PEAP] is selected in
[EAP Type]. You can enter up to 31 characters including spaces. (blank)
MS-CHAP v2 Password Enter the MS-CHAP v2 password when [EAP-PEAP] is selected in
[EAP Type]. You can enter up to 128 characters including spaces. (blank)
Windows Domain Name Enter the Windows domain name when [EAP-PEAP] is selected in
[EAP Type]. You can enter up to 64 characters including spaces. “@”
and backslashes cannot be used. (blank)
Server Certificate Authentication Specify whether to enable or disable server certificate authentication. Enable
Intermediate CA Permission Specify whether to enable or disable intermediate CA permission. Enable
WPA/WPA2-EAP Connection Check Checks the WPA/WPA2-EAP connection. -7. Changing the Projector Settings
130  
						

							Reset Wireless LAN Settings
Item
Default
Reset Wireless LAN Settings The following wireless LAN settings are reset to their defaults:
Communication Mode, SSID, Channel, Authentication Method,
Encryption Method, Transmission WEP Key Number, Network Key,
DHCP, IP Address, Subnet Mask, Default Gateway. -LAN Common
Specify the wired LAN and wireless LAN settings.
Preferred Default Gateway
Item
Default
Preferred Default Gateway Select the network interface for the projector that is connected to both
wired and wireless LAN.• Wired LAN
•
Wireless LAN Wired LANDNS Settings
Item
Default
Host Name Display the projector's host name.
The [Projector Name] in [Projector ID] is used as the projector’s host
name. -
Domain Name Enter the projector's domain name. Enter up to 63 characters. (blank) Network Settings Menu
131  
						

							Projector Search Settings
Item
Default
Projector Search Specify whether or not to search for the projector automatically when
the projector and the device connected to the projector are on the
same network. EnableHTTP Server Settings
Item
Default
HTTP Port Enter an HTTP port that is between 1 and 65535. 80Projector ID
Item
Default
Projector Name Enter an ID to identify the projector on the network. Enter up to 16
characters. You can use alphanumeric characters, hyphens, and periods
for projector names. Only a letter can be used for the first character of the
projector's name. Hyphens and periods cannot be entered consecutively
and cannot be used for the last character of the projector's name. RPJxxxxxx
*1
Identification Code Enter the 4-digit identification code for connecting the projector and the
computer using QuickProjection. 0000 to 9999
*2 *1
xxxxxx is the last six digits of the wired LAN's MAC address.
*2 Each projector has a unique identification code as the default setting.
7. Changing the Projector Settings
132  
						

							Setup Wizard
Item
Default
Network Setting Wizard Open Network Setting Wizard. For details about Network Setting
Wizard, see page 66 "Connecting the Projector to a Network". -Display Status
Wired LAN
Item
Default
Current wired LAN settings are displayed. You can confirm the following
items:
Connection Status, MAC Address, Transmission Speed, IP Address,
Subnet Mask, Default Gateway -Wireless LAN
Item
Default
Current wireless LAN settings are displayed. You can confirm the following
items:
Connection Status, Radio Field Intensity, MAC Address, Access Point
BSSID, Communication Mode, Transmission Speed, Channel, SSID,
Authentication Method, Encryption Method, IP Address, Subnet Mask,
Default Gateway -Firmware Version
Item
Default
Network/USB Func. Firmware Version Display the firmware version of the network and USB functions. - Network Settings Menu
133  
						

							Network Application Settings Menu
This section explains the items in the Network Application Settings menu under the Network/USB
Settings menu tab.
You can also specify and check the items in the Network Application Settings menu using Web Image
Monitor. However, the following items are available only on the menu screen.
• [Crestron WebUI User Auth.], [Crestron WebUI User Password], [Crestron WebUI Admin. Auth.],
[Crestron WebUI Admin. Password], [Control System IP Address], [Control System IP ID], and
[Control System Port] in [Administration Tools]
•
[DLNA Certification Mode] in [Server]
On Web Image Monitor, you can check [Network/USB Func. Firmware Version] on the top page.
For details about Web Image Monitor, see page 166 "Managing the Projector Using Web Image
Monitor".
Administration Tools Web Image Monitor
Item
Default
Web Image Monitor Specify whether or not to allow the projector settings to be changed
and checked using a web browser. To enable this setting, you must
restart Web Image Monitor after making the change. For details
about Web Image Monitor, see page 166 "Managing the Projector
Using Web Image Monitor". EnableAMX Device Discovery
Item
Default
AMX Device Discovery Specify whether or not to allow the projector to be controlled and
monitored by AMX Device Discovery. To use this function, an AMX
controller is required in your network environment. For details about
AMX Device Discovery, see the AMX LLC website. Disable7. Changing the Projector Settings
134  
						

							Crestron RoomView
Item
Default
Crestron RoomView Specify whether or not to allow the projector to be controlled and
monitored by Crestron RoomView. For details about Crestron
RoomView, see page 169 "Controlling and Monitoring the Projector
Using Crestron RoomView". Disable
Crestron WebUI User Auth. Specify whether or not to restrict access to Crestron WebUI with a
password. Off
Crestron WebUI User Password Enter the password for Crestron WebUI user authentication up to 26
characters. (blank)
Crestron WebUI Admin. Auth. Specify whether or not to restrict access to the tools screen on
Crestron WebUI with a password. Off
Crestron WebUI Admin. Password Enter the password for Crestron WebUI administrator authentication
up to 26 characters. (blank)
Control System IP Address Enter the IP address of Crestron Control System. 0.0.0.0
Control System IP ID Enter the IP ID to connect to Crestron Control System. 3
Control System Port Enter the port number for communicating to Crestron Control System. 41794PJLink
Item
Default
PJLink Authentication Specify whether or not to set PJLink authentication. Off Network Application Settings Menu
135  
						

							Item
Default
PJLink Password Enter a password used when setting the PJLink authentication. Up to
32 alphanumeric characters can be used. (blank)Security
Item
Default
Administrator Authentication Specify whether or not to set administrator authentication. A administrator
password is required to change this setting.
If administrator authentication is set, a password is required for the
following operations:• Changing [Transmission WEP Key Number], [Network Key], [EAP
Type], [Client Certificate User Name], [MS-CHAP v2 User Name],
[MS-CHAP v2 Password], [Windows Domain Name], [Server
Certificate Authentication], [Intermediate CA Permission], [Crestron
WebUI User Auth.], [Crestron WebUI User Password], [Crestron
WebUI Admin. Auth.], [Crestron WebUI Admin. Password], [PJLink
Authentication], and [PJLink Password]
•
Using the simple wireless LAN setup function and Network Setting
Wizard
• Importing, deleting, or displaying client or CA certificates
• Turning the projector on or off via a network
• Changing the settings using Web Image Monitor
• Executing [Reset Security Settings] Off
Administrator Password Enter the administrator password. Up to 32 alphanumeric characters can
be used. The current password is required to change the administrator
password. (blank)
Application Authentication When projecting images using an application installed on a smart device,
specify whether or not to enter the application password. Off7. Changing the Projector Settings
136  
						

							Item
Default
Application Password Enter the password to be used for Application Authentication.
Up to 32 alphanumeric characters can be used. (blank)
Reset Security Settings Reset the values of the following settings protected by Administrator
Authentication:
[Transmission WEP Key Number], [Network Key], [EAP Type], [Client
Certificate User Name], [MS-CHAP v2 User Name], [MS-CHAP v2
Password], [Windows Domain Name], [Server Certificate
Authentication], [Intermediate CA Permission], [Crestron WebUI User
Auth.], [Crestron WebUI User Password], [Crestron WebUI Admin.
Auth.], [Crestron WebUI Admin. Password], [PJLink Authentication], and
[PJLink Password]. -Miracast
Miracast
Item
Default
Check Connection Terminal Select whether or not to allow connecting to the projector by
operating only on the smart device and not requiring any
confirmation procedure on the projector. Do not Skip Network Application Settings Menu
137  
						

							Server
Remote Projection Control
Item
Default
Remote Projection Control Specify whether or not to enable the Remote Projection Control
function. The Remote Projection Control function allows you to project
images from a tablet computer or a smart device via a network.
For details about how to project images using this function, see
page 76 "Projecting Images Using DLNA-Compatible Devices". EnableStill Image
Item
Default
Display Effect Select the display effect for switching the image.• None
•
Push
The current image is pushed off by the next image.
• Wipe The current image is wiped off by the next image.
• Fade The current image fades out and the next image fades in. None
Display Interval (sec.) Enter the slide show switching interval from 5 to 999 seconds. 5 secondsMoving Image
Item
Default
Repeat Specify whether or not to repeat video playback. Off7. Changing the Projector Settings
138