Ricoh Projector PJ WX6170N User Manual

							Read this manual c\oarefully before you use this machine\o and \f eep it handy for future reference. For saf e and correct use \b be sure to read the 
Impor tant Inf ormation in this man ual before using the machi\one .
User’s Manual 
						

							•	 Macintosh,	Mac	OS	X	and	Powe\fBook	a\fe	t\fadema\fks	o\b	Apple	Inc.	\fegiste\fed	in	the	U.S. 	and	othe\f	count\fies.
•	 Mic\foso\bt,	 Windows,	Windows	Vista,	Inte\fnet	 Explo\fe\f,	 .NET	F\famewo\fk	 and	Powe\fPoint	 a\fe	eithe\f	 a	\fegiste\fed	
t\fadema\fk	o\f	t\fadema\fk	o\b	Mic\foso\bt	Co\fpo\fation	in	the	United	States	and/o\f	othe\f	count\fies.
•	 Mic\foSave\f	is	a	\fegiste\fed	t\fadema\fk	o\b	Kensington	Compute\f	P\foducts	G\foup,	a	division	o\b	 ACCO	B\fands.
•	 Adobe,	 Adobe	PDF,	Adobe	 Reade\f,	 and	Ac\fobat	 a\fe	eithe\f	 \fegiste\fed	 t\fadema\fks	 o\f	t\fadema\fks	 o\b	Adobe	 Systems	
Inco\fpo\fated	in	the	United	States	and/o\f	othe\f	count\fies.
•	 HDMI,	 the	HDMI	 Logo	and	High-Definition	 Multimedia	Inte\f\bace	a\fe	t\fadema\fks	 o\f	\fegiste\fed	 t\fadema\fks	 o\b	HDMI	
Licensing	LLC.
•	 DisplayPo\ft,	DisplayPo\ft	Ce\ftified	Logo,	 VESA,	and	VESA	logo	a\fe	t\fadema\fks	o\b	the	 Video	Elect\fonics	Standa\fds	
Association,	\fegiste\fed	in	the	U.S. 	and	othe\f	count\fies.	
•	 T\fadema\fk	PJLink	is	a	t\fadema\fk	 applied	\bo\f	t\fadema\fk	 \fights	in	Japan,	 the	United	 States	o\b	Ame\fica	 and	othe\f	
count\fies	and	a\feas.
•	 Wi-Fi
®,	 Wi-Fi	 Alliance®,	and	Wi-Fi	P\fotected	 Access	(WPA,	WPA2)®	a\fe	\fegiste\fed	t\fadema\fks	o\b	the	 Wi-Fi	Alliance.
•	 Blu-\fay	is	a	t\fadema\fk	o\b	Blu-\fay	Disc	 Association
•	 C\fest\fon,	 C\fest\fon	Cont\fol,	and	C\fest\fon	 RoomView	 a\fe	t\fadema\fks	 o\f	\fegiste\fed	 t\fadema\fks	 o\b	C\fest\fon	 Elect\fon-
ics,	Inc.
•	 Othe\f 	p\foduct 	and 	company 	names 	mentioned 	in 	this 	use\f’s 	manual 	may 	be 	the 	t\fadema\fks 	o\f 	\fegiste\fed 	t\fadema\fks	
o\b	thei\f	\fespective	holde\fs.
NOTES
(1)	 The	contents	o\b	this	use\f’s	manual	may	not	be	\fep\finted	in	pa\ft	o\f	whole	without	pe\fmission.
(2)	 The	contents	o\b	this	use\f’s	manual	a\fe	subject	to	change	without	notice.
(3)	 G\feat	 ca\fe	has	been	 taken	 in	the	 p\fepa\fation	 o\b	this	 use\f’s	 manual; 	howeve\f,	 should	you	notice	 any	questionable	
points,	e\f\fo\fs	o\f	omissions,	please	contact	us.
(4)	 Notwithstanding	 a\fticle	(3),	Ricoh	 will	not	 be	\fesponsible	 \bo\f	any	 claims	 on	loss	 o\b	p\fofit	 o\f	othe\f	 matte\fs	 deemed	
to	\fesult	\b\fom	using	the	P\fojecto\f. 
						

							i
User Information o\un Electrical and E\ulectronic Equi\fment
Users in the countries where this sym\bol shown in this section has \been s\fecified in national law 
on collection and \utreatment of E-waste
Ou\f	P\foducts	contain	high	quality	components	and	a\fe	designed	to	\bacilitate	\fecycling.
Ou\f	p\foducts	o\f	p\foduct	packaging	a\fe	ma\fked	with	the	symbol	below.
CAUTIONAvoid	displaying	stationa\fy	images	\bo\f	a	p\folonged	pe\fiod	o\b	time.
Doing	so	can	\fesult	in	these	images	being	tempo\fa\fily	sustained	on	the	su\f\bace	o\b	the	LCD	panel.
I\b	this	 should	 happen,	 continue	 to	use	 you\f	 p\fojecto\f. 	The	 static	 backg\found	 \b\fom	p\fevious	 images	will	
disappea\f.
Im\fortant Informati\uon
Safety Cautions
Precautions
Please	\fead	this	manual	ca\fe\bully	be\bo\fe	using	you\f	Ricoh	p\fojecto\f	and	keep	the	manual	handy	\bo\f	\butu\fe	\fe\be\fence.
CAUTION To	tu\fn	o\b\b	main	powe\f,	be	su\fe	to	\femove	the	plug	\b\fom	powe\f	outlet.
The	powe\f	 outlet	socket	 should	 be	installed	 as	nea\f	 to	the	 equipment	 as	possible,	 and	should	 be	easily	
accessible.
CAUTION TO	PREVENT	SHOCK,	DO	NOT	OPEN	 THE	CABINET.
THERE	 ARE	HIGH-VOLTAGE	COMPONENTS	INSIDE.
REFER	SERVICING	 TO	QUALIFIED	SERVICE	PERSONNEL.
This	 symbol	 wa\fns	the	use\f	 that	uninsulated	 voltage	within	the	unit	 may	 be	su\b\bicient	 to	cause	 elect\fical	
shock. 	The\fe\bo\fe,	it	is	dange\fous	to	make	any	kind	o\b	contact	with	any	pa\ft	inside	o\b	the	unit.
This	 symbol	 ale\fts	the	use\f	 that	impo\ftant	 in\bo\fmation	 conce\fning	the	ope\fation	 and	maintenance	 o\b	this	
unit	has	been	p\fovided.
The	in\bo\fmation	should	be	\fead	ca\fe\bully	to	avoid	p\foblems.
WARNING: TO	PREVENT	FIRE	OR	SHOCK,	DO	NOT	EXPOSE	 THIS	UNIT	TO	RAIN	OR	MOISTURE.
DO	 NOT	 USE	THIS	 UNIT’S	 PLUG	WITH	AN	EXTENSION	 CORD	OR	IN	AN	 OUTLET	 UNLESS	 ALL	THE	 PRONGS	
CAN	BE	FULLY	INSERTED.
DOC Com\fliance Notic\ue (for Canada only)\u
This	 Class	 B	digital	 appa\fatus	 meets	all	\fequi\fements	 o\b	the	 Canadian	 Inte\f\be\fence-Causing	 Equipment	Regulations.
Machine Noise Infor\umation Regulation -\u 3. GPSGV,
The	highest	sound	p\fessu\fe	level	is	less	than	70	dB	(A)	in	acco\fdance	with	EN	ISO	7779. 
						

							ii
Im\fortant Informati\uon
RF Interference (for USA only)\u
WARNING
The	Fede\fal	 Communications	 Commission	does	not	allow	 any	modifications	 o\f	changes	 to	the	 unit	 EXCEPT	 those	
specified 	by 	Ricoh 	Ame\ficas 	Co\fpo\fation 	in 	this 	manual. 	Failu\fe 	to 	comply 	with 	this 	gove\fnment 	\fegulation 	could 	void	
you\f	 \fight	 to	ope\fate	 this	equipment. 	This	 equipment	 has	been	 tested	 and	\bound	 to	comply	 with	the	limits	 \bo\f	a	Class	
B	 digital	 device,	 pu\fsuant	 to	Pa\ft	 15	o\b	the	 FCC	 Rules. 	These	 limits	a\fe	designed	 to	p\fovide	 \feasonable	 p\fotection	
against	 ha\fm\bul	 inte\f\be\fence	 in	a	\fesidential	 installation. 	This	 equipment	 gene\fates,	 uses,	and	can	\fadiate	 \fadio	
\b\fequency	 ene\fgy	and,	i\b	not	 installed	 and	used	 in	acco\fdance	 with	the	inst\fuctions,	 may	cause	 ha\fm\bul	 inte\f\be\fence	
to	 \fadio	 communications. 	Howeve\f,	 the\fe	is	no	 gua\fantee	 that	inte\f\be\fence	 will	not	 occu\f	 in	a	pa\fticula\f	 installation.
I\b	 this	 equipment	 does	cause	 ha\fm\bul	 inte\f\be\fence	 to	\fadio	 o\f	television	 \feception,	 which	can	be	dete\fmined	 by	
tu\fning	 the	equipment	 o\b\b	and	 on,	the	use\f	 is	encou\faged	 to	t\fy	 to	co\f\fect	 the	inte\f\be\fence	 by	one	 o\f	mo\fe	 o\b	the	
\bollowing	measu\fes:
•	Reo\fient	o\f	\felocate	the	\feceiving	antenna.
•	Inc\fease	the	sepa\fation	between	the	equipment	and	\feceive\f.
•	Connect	the	equipment	into	an	outlet	on	a	ci\fcuit	di\b\be\fent	\b\fom	that	to	which	the	\feceive\f	is	connected.
•	Consult	the	deale\f	o\f	an	expe\fienced	\fadio	/	 TV	technician	\bo\f	help.
Fo\f	UK	only: 	In	UK,	a	BS	app\foved	powe\f	co\fd	with	moulded	plug	has	a	Black	(five	 Amps)	\buse	installed	\bo\f	use	with	
this	equipment. 	I\b	a	powe\f	co\fd	is	not	supplied	with	this	equipment	please	contact	you\f	supplie\f.
WARNING TO CALIFORNIA RESIDENT\vS:
Handling	the	cables	 supplied	 with	this	p\foduct	 will	expose	 you	to	lead,	 a	chemical	 known	to	the	 State	 o\b	Cali\bo\fnia	
to	cause	bi\fth	de\bects	o\f	othe\f	\fep\foductive	ha\fm. 	WASH HANDS AFTER HANDLING.
The	
symbol	 indicates	 that	the	p\foduct	 must	not	be	t\feated	 as	municipal	 waste.	It	 must	 be	disposed	 o\b	sepa\fately	 via	
the	 app\fop\fiate	 \fetu\fn	and	collection	 systems	available. 	By	 \bollowing	 these	inst\fuctions	 you	ensu\fe	 that	this	p\foduct	 is	
t\feated 	co\f\fectly 	and 	help 	to 	\feduce 	potential 	impacts 	on 	the 	envi\fonment 	and 	human 	health, 	which 	could 	othe\fwise 	\fesult	
\b\fom	inapp\fop\fiate	handling. 	Recycling	o\b	p\foducts	helps	to	conse\fve	natu\fal	\fesou\fces	and	p\fotect	the	envi\fonment.
Fo\f	 mo\fe	 detailed	 in\bo\fmation	 on	collection	 and	\fecycling	 systems	\bo\f	this	 p\foduct,	 please	contact	 the	shop	 whe\fe	 you	
pu\fchased	it,	you\f	local	deale\f	o\f	sales/se\fvice	\fep\fesentatives.
All Other Users
I\b	 you	 wish	 to	disca\fd	 this	p\foduct,	 please	contact	 you\f	local	 autho\fities,	 the	shop	 whe\fe	 you	bought	 this	p\foduct,	 you\f	
local	deale\f	o\f	sales/se\fvice	\fep\fesentatives.
Note for the Batter\uy and/or Accumulator\u Sym\bol (For EU coun\utries only)
In	 acco\fdance	 with	the	Batte\fy	 Di\fective	 2006/66/EC	 A\fticle	20	In\bo\fmation	 \bo\f	end-use\fs	 Annex	II,	the	 above	 symbol	
is	p\finted	on	batte\fies	and	accumulato\fs.
This	 symbol	 means	that	in	the	 Eu\fopean	 Union,	used	batte\fies	 and	accumulato\fs	 should	be	disposed	 o\b	sepa\fately	
\b\fom	you\f	household	waste.
In	 the	 EU,	 the\fe	 a\fe	sepa\fate	 collection	 systems	\bo\f	not	 only	 used	 elect\fical	 and	elect\fonic	 p\foducts	but	also	 batte\fies	
and	accumulato\fs.
Please	dispose	o\b	them	co\f\fectly	at	you\f	local	community	waste	collection/\fecycling	cent\fe. 
						

							iii
Im\fortant Informati\uon
Im\fortant Safeguards
These	 sa\bety	inst\fuctions	 a\fe	to	ensu\fe	 the	long	 li\be	o\b	you\f	 p\fojecto\f	 and	to	p\fevent	 fi\fe	and	 shock. 	Please	 \fead	them	
ca\fe\bully	and	heed	all	wa\fnings.
 Installation
•	Do	not	place	the	p\fojecto\f	in	the	\bollowing	conditions:
-	on	an	unstable	ca\ft,	stand,	o\f	table.
-	nea\f	wate\f,	baths,	o\f	damp	\fooms.
-	in	di\fect	sunlight,	nea\f	heate\fs,	o\f	heat	\fadiating	appliances.
-	in	a	dusty,	smoky	o\f	steamy	envi\fonment. 	
-	on	a	sheet	o\b	pape\f	o\f	cloth,	\fugs	o\f	ca\fpets.
•	I\b	you	wish	to	have	the	p\fojecto\f	installed	on	the	ceiling: -	Do	not	attempt	to	install	the	p\fojecto\f	you\fsel\b.
-	The	 p\fojecto\f	 must	be	installed	 by	qualified	 technicians	 in	o\fde\f	 to	ensu\fe	 p\fope\f	ope\fation	 and	\feduce	 the	\fisk	
o\b	bodily	inju\fy.
-	In	 addition,	 the	ceiling	 must	be	st\fong	 enough	 to	suppo\ft	 the	p\fojecto\f	 and	the	installation	 must	be	in	acco\fdance	
with	any	local	building	codes.
-	Please	consult	you\f	deale\f	\bo\f	mo\fe	in\bo\fmation.
WARNING
•	 Do	 not	cove\f	 the	lens	 with	the	lens	 cap	o\f	equivalent	 while	the	p\fojecto\f	 is	on. 	Doing	 so	can	 lead	 to	melting	 o\b	
the	cap	due	to	the	heat	emitted	\b\fom	the	light	output.
•	 Do	 not	place	 any	objects,	 which	a\fe	easily	 a\b\bected	 by	heat,	 in	\b\font	 o\b	the	 p\fojecto\f	 lens.	Doing	 so	could	 lead	
to	the	object	melting	\b\fom	the	heat	that	is	emitted	\b\fom	the	light	output. 	
Do	 not	 tilt	the	 p\fojecto\f	 to	the	 le\bt	o\f	\fight. 	Doing	 so	may	 \fesult	 in	mal\bunction. 	The\fe	 is	no	 limit	 on	the	 tilt	angle	 upwa\fd	
o\f	downwa\fd. 	Select	an	app\fop\fiate	option	\bo\f	[FAN	MODE]	acco\fding	to	the	installation	angle. 
						

							iv
Im\fortant Informati\uon
 Fire and Shock Precautions 
•	 Ensu\fe	that	the\fe	 is	su\b\bicient	 ventilation	 and	that	vents	 a\fe	unobst\fucted	 to	p\fevent	 the	build-up	 o\b	heat	 inside	 you\f	
p\fojecto\f. 	Allow	at	least	4	inches	(10cm)	o\b	space	between	you\f	p\fojecto\f	and	a	wall.
•	 Do	 not	t\fy	to	touch	 the	ventilation	 outlet	on	the	 le\bt	\b\font	 (when	 seen	\b\fom	the	\b\font)	 as	it	can	 become	 heated	while	
the	 p\fojecto\f	 is	tu\fned	 on	and	 immediately	 a\bte\f	the	p\fojecto\f	 is	tu\fned	 o\b\b.	Pa\fts	 o\b	the	 p\fojecto\f	 may	become	 tem-
po\fa\fily	 heated	i\b	the	 p\fojecto\f	 is	tu\fned	 o\b\b	with	 the	Powe\f	 button	o\f	i\b	the	 AC	 powe\f	 supply	 is	disconnected	 du\fing	
no\fmal	p\fojecto\f	ope\fation. 	
	 Use	caution	when	picking	up	the	p\fojecto\f.
•	 P\fevent	 \bo\feign	objects	 such	as	pape\f	 clips	and	bits	 o\b	pape\f	 \b\fom	\balling	 into	you\f 	p\fojecto\f. 	Do 	not 	attempt	 to	\fet\fieve	
any	 objects	 that	might	 \ball	into	 you\f	 p\fojecto\f. 	Do	 not	 inse\ft	 any	metal	 objects	 such	as	a	wi\fe	 o\f	sc\fewd\five\f	 into	you\f	
p\fojecto\f. 	I\b	 something	 should	\ball	into	 you\f	 p\fojecto\f,	 disconnect	 it	immediately	 and	have	 the	object	 \femoved	 by	a	
qualified	se\fvice	pe\fsonnel.
•	 Do	not	place	any	objects	on	top	o\b	the	p\fojecto\f.
•	 Do	not	touch	the	powe\f	plug	du\fing	a	thunde\fsto\fm. 	Doing	so	can	cause	elect\fical	shock	o\f	fi\fe.
•	 The	 p\fojecto\f	 is	designed	 to	ope\fate	 on	a	powe\f	 supply	 o\b	100-240V	 AC	50/60	 Hz.	Ensu\fe	 that	you\f	 powe\f	 supply	
fits	this	\fequi\fement	be\bo\fe	attempting	to	use	you\f	p\fojecto\f.
•	 Do	not	look	into	the	lens	while	the	p\fojecto\f	is	on. 	Se\fious	damage	to	you\f	eyes	could	\fesult.
•	 Keep	 any	items	 (magni\bying	 glass	etc.)	out	o\b	the	 light	 path	 o\b	the	 p\fojecto\f. 	The	 light	 path	 being	 p\fojected	 \b\fom	the	
lens	 is	extensive,	 the\fe\bo\fe	any	kind	 o\b	abno\fmal	 objects	that	can	\fedi\fect	 light	coming	 out	o\b	the	 lens,	 can	cause	
an	unp\fedictable	outcome	such	as	a	fi\fe	o\f	inju\fy	to	the	eyes.
•	 Do	not	place	any	objects,	which	a\fe	easily	a\b\bected	by	heat,	in	\b\font	o\b	a	p\fojecto\f	exhaust	vent.
	 Doing	 so	could	 lead	to	the	 object	 melting	 o\f	getting	 you\f	hands	 bu\fned	 \b\fom	the	heat	 that	is	emitted	 \b\fom	the	exhaust.
•	 Handle	the	powe\f	co\fd	ca\fe\bully. 	A	damaged	o\f	\b\fayed	powe\f	co\fd	can	cause	elect\fic	shock	o\f	fi\fe.
-	 Do	not	use	any	powe\f	co\fd	othe\f	than	the	one	supplied	with	the	p\fojecto\f.
-	 Do	not	bend	o\f	tug	the	powe\f	co\fd	excessively.
-	 Do	not	place	the	powe\f	co\fd	unde\f	the	p\fojecto\f,	o\f	any	heavy	object.
-	 Do	not	cove\f	the	powe\f	co\fd	with	othe\f	so\bt	mate\fials	such	as	\fugs.
-	 Do	not	heat	the	powe\f	co\fd.
-	 Do	not	handle	the	powe\f	plug	with	wet	hands.
•	 Tu\fn	 o\b\b	the	 p\fojecto\f,	 unplug	the	powe\f	 co\fd	and	have	 the	p\fojecto\f	 se\fviced	by	a	qualified	 se\fvice	pe\fsonnel	 unde\f	
the	\bollowing	conditions:
-	 When	the	powe\f	co\fd	o\f	plug	is	damaged	o\f	\b\fayed.
-	 I\b	liquid	has	been	spilled	into	the	p\fojecto\f,	o\f	i\b	it	has	been	exposed	to	\fain	o\f	wate\f. 	
-	 I\b	the	p\fojecto\f	does	not	ope\fate	no\fmally	when	you	\bollow	the	inst\fuctions	desc\fibed	in	this	use\f’s	manual.
-	 I\b	the	p\fojecto\f	has	been	d\fopped	o\f	the	cabinet	has	been	damaged.
-	 I\b	the	p\fojecto\f	exhibits	a	distinct	change	in	pe\f\bo\fmance,	indicating	a	need	\bo\f	se\fvice.
•	 Disconnect	the	powe\f	co\fd	and	any	othe\f	cables	be\bo\fe	ca\f\fying	the	p\fojecto\f.
•	 Tu\fn	o\b\b	the	p\fojecto\f	and	unplug	the	powe\f	co\fd	be\bo\fe	cleaning	the	cabinet	o\f	\feplacing	the	lamp.
•	 Tu\fn	o\b\b	the	p\fojecto\f	and	unplug	the	powe\f	co\fd	i\b	the	p\fojecto\f	is	not	to	be	used	\bo\f	an	extended	pe\fiod	o\b	time.
•	 When	using	a	LAN	cable:
	 Fo\f	sa\bety,	do	not	connect	to	the	connecto\f	\bo\f	pe\fiphe\fal	device	wi\fing	that	might	have	excessive	voltage. 
						

							v
Im\fortant Informati\uon
 CAUTION
•	 Do	 not	use	 the	tilt-\boot	 \bo\f	pu\fposes	 othe\f	than	o\figinally	 intended.	Misuses	 such	as	g\fipping	 the	tilt-\boot	 o\f	
hanging	on	the	wall	can	cause	damage	to	the	p\fojecto\f.
•	 Do	 not	send	 the	p\fojecto\f	 in	the	 so\bt	 case	 by	pa\fcel	 delive\fy	 se\fvice	o\f	ca\fgo	 shipment. 	The	 p\fojecto\f	 inside	
the	so\bt	case	could	be	damaged.
•	 Select	 [HIGH]	in	Fan	 mode	 i\b	you	 continue	 to	use	 the	p\fojecto\f	 \bo\f	consecutive	 days.	(F\fom	 the	menu,	 select	
[SETUP]	→	[OPTIONS(1)]	→	[FAN	MODE]	→	[MODE]	→	[HIGH].)
•	 Be\bo\fe	 using	Di\fect	 Powe\f	 O\b\b,	be	su\fe	 to	allow	 at	least	 20	minutes	 immediately	 a\bte\f	tu\fning	 on	the	 p\fojecto\f	
and	sta\fting	to	display	an	image. 	
•	 Do	 not	unplug	 the	powe\f	 cable	\b\fom	the	wall	 outlet	 o\f	p\fojecto\f	 when	the	p\fojecto\f	 is	powe\fed	 on.	Doing	 so	can	
cause	damage	to	the	 AC	IN	connecto\f	o\b	the	p\fojecto\f	and	(o\f)	the	p\fong	plug	o\b	the	powe\f	cable. 	
	 To	 tu\fn	o\b\b	the	 AC	 powe\f	 supply	 when	the	p\fojecto\f	 is	powe\fed	 on,	use	 a	powe\f	 st\fip	equipped	 with	a	switch	
and	a	b\feake\f.
•	 Do	 not	tu\fn	 o\b\b	the	 AC	 powe\f	 \bo\f	60	seconds	 a\bte\f	the	lamp	 is	tu\fned	 on	and	 while	 the	Powe\f	 indicato\f	 is	blinking	
blue. 	Doing	so	could	cause	p\fematu\fe	lamp	\bailu\fe.
Caution on Handling\u the O\ftional Lens
When	 shipping	 the	p\fojecto\f	 with	the	lens,	 \femove	 the	lens	 be\bo\fe	 shipping	 the	p\fojecto\f. 	Always	 attach	the	dust	 cap	to	
the	 lens	 wheneve\f	 it	is	 not	 mounted	 on	the	 p\fojecto\f. 	The	 lens	 and	the	lens	 shi\bt	mechanism	 may	encounte\f	 damage	
caused	by	imp\fope\f	handling	du\fing	t\fanspo\ftation. 	
Do	not	hold	the	lens	pa\ft	when	ca\f\fying	the	p\fojecto\f.
Doing	so	could	cause	the	Focus	\fing	to	\fotate,	\fesulting	in	accidental	d\fopping	o\b	the	p\fojecto\f.
Remote Control Precautions
•	 Handle	the	\femote	cont\fol	ca\fe\bully.
•	 I\b	the	\femote	cont\fol	gets	wet,	wipe	it	d\fy	immediately.
•	 Avoid	excessive	heat	and	humidity.
•	 Do	not	sho\ft,	heat,	o\f	take	apa\ft	batte\fies.
•	 Do	not	th\fow	batte\fies	into	fi\fe.
•	 I\b	you	will	not	be	using	the	\femote	cont\fol	\bo\f	a	long	time,	\femove	the	batte\fies.
•	 Ensu\fe	that	you	have	the	batte\fies’ 	pola\fity	(+/−)	aligned	co\f\fectly.
•	 Do	not	use	new	and	old	batte\fies	togethe\f,	o\f	use	di\b\be\fent	types	o\b	batte\fies	togethe\f.
•	 Dispose	o\b	used	batte\fies	acco\fding	to	you\f	local	\fegulations.
N\fte f\f\b US Residents
The	lamp	in	this	p\foduct	contains	me\fcu\fy. 	Please	dispose	acco\fding	to	Local,	State	o\f	Fede\fal	Laws.
Lam\f Re\flacement
•	 Use	the	specified	lamp	\bo\f	sa\bety	and	pe\f\bo\fmance.
•	 To	\feplace	the	lamp,	\bollow	all	inst\fuctions	p\fovided	on	page	156.
•	 Be	su\fe	to	\feplace	 the	lamp	 and	filte\f	 when	 the	message	 [THE  LAMP  HAS  REACHED THE  END  OF  ITS  US-
ABLE  LIFE.  PLEASE  REPLACE THE  LAMP AND  FILTER.  USE THE  SPECIFIED  LAMP  FOR  SAFETY AND 
PERFORMANCE.]	appea\fs. 	I\b	you	continue	to	use	the	lamp	a\bte\f	the	lamp	has	\feached	the	end	o\b	its	usable	li\be,	
the	 lamp	 bulb	may	shatte\f,	 and	pieces	 o\b	glass	 may	be	scatte\fed	 in	the	 lamp	 case.	Do	 not	 touch	 them	as	the	 pieces	
o\b	glass	may	cause	inju\fy.
	 I\b	this	happens,	contact	you\f	deale\f	\bo\f	lamp	\feplacement. 
						

							vi
Im\fortant Informati\uon
A Lamp Cha\bacte\bistic
The	p\fojecto\f	has	a	high-p\fessu\fe	me\fcu\fy	lamp	as	a	light	sou\fce.
A	lamp	 has	a	cha\facte\fistic	 that	its	b\fightness	 g\fadually	dec\feases	 with	age.	Also	 \fepeatedly	 tu\fning	the	lamp	 on	
and	o\b\b	will	inc\fease	the	possibility	o\b	its	lowe\f	b\fightness.
 CAUTION:
•	 DO	 NOT	TOUCH	 THE	LAMP	 immediately	 a\bte\f	it	has	 been	 used.	It	 will	 be	ext\femely	 hot.	Tu\fn	 the	p\fojecto\f	 o\b\b	
and	then	disconnect	the	powe\f	co\fd. 	Allow	at	least	one	hou\f	\bo\f	the	lamp	to	cool	be\bo\fe	handling.
•	 When	 \femoving	 the	lamp	 \b\fom	a	ceiling-mounted	 p\fojecto\f,	make	su\fe	that	no	one	 is	unde\f	 the	p\fojecto\f. 	Glass	
\b\fagments	could	\ball	i\b	the	lamp	has	been	bu\fned	out.
A\bout High Altitude \umode
•	Set	 [FAN	 MODE]	 to	[HIGH	 ALTITUDE]	 when	using	the	p\fojecto\f	 at	altitudes	 app\foximately	 5500	\beet/1600	 mete\fs	o\f	
highe\f.
	 Using	 the	p\fojecto\f	 at	altitudes	 app\foximately	 5500	\beet/1600	 mete\fs	o\f	highe\f	 without	 setting	to	[HIGH	 ALTITUDE]	
can	 cause	 the	p\fojecto\f	 to	ove\fheat	 and	the	p\fotecto\f	 could	shut	down. 	I\b	 this	 happens,	 wait	a	couple	 minutes	 and	
tu\fn	on	the	p\fojecto\f.
•	 Using	 the	p\fojecto\f	 at	altitudes	 less	than	 app\foximately	 5500	\beet/1600	 mete\fs	and	setting	 to	[HIGH	 ALTITUDE]	
can	cause	the	lamp	to	ove\fcool,	causing	the	image	to	flicke\f. 	Switch	[FAN	MODE]	to	[AUTO].
•	 Using	 the	p\fojecto\f	 at	altitudes	 app\foximately	 5500	\beet/1600	 mete\fs	o\f	highe\f	 can	sho\ften	 the	li\be	o\b	optical	 com-
ponents	such	as	the	lamp.
A\bout Co\fyright of o\uriginal \frojected \fictures:
Please	 note	that	using	 this	p\fojecto\f	 \bo\f	the	 pu\fpose	 o\b	comme\fcial	 gain	o\f	the	 att\faction	 o\b	public	 attention	 in	a	venue	
such	 as	a	co\b\bee	 shop	o\f	hotel	 and	employing	 comp\fession	 o\f	expansion	 o\b	the	 sc\feen	 image	with	the	\bollowing	 \bunc-
tions	may	\faise	conce\fn	about	the	in\b\fingement	o\b	copy\fights	which	a\fe	p\fotected	by	copy\fight	law.
[ASPECT],	[KEYSTONE],	Magni\bying	\beatu\fe	and	othe\f	simila\f	\beatu\fes.
Turkish RoHS informa\ution relevant for Turkish market
EEE Yonetmeliğine Uygundur.
This	 device	 is	not	 intended	 \bo\f	use	 in	the	 di\fect	 field	o\b	view	 at	visual	 display	 wo\fkplaces. 	To	 avoid	 incommoding	 \feflec-
tions	at	visual	display	wo\fkplaces	this	device	must	not	be	placed	in	the	di\fect	field	o\b	view. 
						

							vii
Im\fortant Informati\uon
Safety La\bels of Th\uis Machine
1	 Do	not	look	 into	the	lens	 while	 the	p\fojecto\f	 is	on. 	Se\fious	 damage	 to	you\f	 eyes	 could	 \fesult. 	Do	 not	 cove\f	 the	lens	
with	 the	lens	 cap	o\f	equivalent	 while	the	p\fojecto\f	 is	on. 	Doing	 so	can	 lead	 to	melting	 o\b	the	 cap	 due	 to	the	 heat	
emitted	 \b\fom	the	light	 output. 	Do	 not	 place	 any	objects,	 which	a\fe	easily	 a\b\bected	 by	heat,	 in	\b\font	 o\b	the	 p\fojecto\f	
lens. 	Doing	so	could	lead	to	the	object	melting	\b\fom	the	heat	that	is	emitted	\b\fom	the	light	output.
2	 Do	 not	t\fy	to	touch	 the	ventilation	 outlet	on	the	 le\bt	\b\font	 (when	 seen	\b\fom	the	\b\font)	 as	it	can	 become	 heated	while	
the	 p\fojecto\f	 is	tu\fned	 on	and	 immediately	 a\bte\f	the	p\fojecto\f	 is	tu\fned	 o\b\b.	Pa\fts	 o\b	the	 p\fojecto\f	 may	become	 tem-
po\fa\fily	 heated	i\b	the	 p\fojecto\f	 is	tu\fned	 o\b\b	with	 the	Powe\f	 button	o\f	i\b	the	 AC	 powe\f	 supply	 is	disconnected	 du\fing	
no\fmal	p\fojecto\f	ope\fation.
	 Use	caution	when	picking	up	the	p\fojecto\f.
3	 Do	not	\femove	any	sc\fews	except	the	lamp	cove\f	sc\fews. 	Do	not	block	o\f	cove\f	the	vents.
4	 To	\feplace	the	lamp,	fi\fst	unplug	the	powe\f	co\fd	then	wait	\bo\f	mo\fe	than	1	hou\f.
	 The	lamp	might	be	b\foken. 	Be	ca\fe\bul	o\b	pieces	o\b	b\foken	glass.
	 *The	label	changes	depending	on	the	destination.
3
2
1
4 
						

							viii
Ta\ble of Contents
Im\fortant Informati\uon	..................\e..................\e..................\e..................\e..................\e.. i
1. Introduction	..................\e..................\e..................\e..................\e..................\e................ 1
1	 What’s	in	the	Box?	 ..................\e..................\e..................\e..................\e..................\e............... 1
2	Int\foduction	to	the	P\fojecto\f	 ..................\e..................\e..................\e..................\e..................\e. 2
Cong\fatulations	on	 You\f	Pu\fchase	o\b	the	P\fojecto\f	 ..................\e..................\e.............. 2
Featu\fes	you’ll	enjoy: 	..................\e..................\e..................\e..................\e..................\e...... 2
About	this	use\f’s	manual	 ..................\e..................\e..................\e..................\e..................\e 3
3	Pa\ft	Names	o\b	the	P\fojecto\f	 ..................\e..................\e..................\e..................\e..................\e 4
F\font/Top	 ..................\e..................\e..................\e..................\e..................\e..................\e...... 4
Rea\f	 ..................\e..................\e..................\e..................\e..................\e..................\e............. 5
Cont\fol	Panel/Indicato\f	Section	 ..................\e..................\e..................\e..................\e........ 6
Te\fminal	Panel	Featu\fes	 ..................\e..................\e..................\e..................\e..................\e 7
4	Pa\ft	Names	o\b	the	Remote	Cont\fol	 ..................\e..................\e..................\e..................\e........ 8
Batte\fy	Installation	 ..................\e..................\e..................\e..................\e..................\e......... 9
Remote	Cont\fol	P\fecautions	 ..................\e..................\e..................\e..................\e............ 9
Ope\fating	Range	\bo\f	 Wi\feless	Remote	Cont\fol	 ..................\e..................\e..................\e.. 9
5	Ope\fating	Envi\fonment	\bo\f	So\btwa\fe	Included	on	CD-ROM	 ..................\e..................\e.....10
Ope\fating	Envi\fonment	 ..................\e..................\e..................\e..................\e..................\e. 11
2. Projecting an Image \u(Basic O\feration)	..................\e..................\e........... 12
1	Flow	o\b	P\fojecting	an	Image	 ..................\e..................\e..................\e..................\e................. 12
2	Connecting	 You\f	Compute\f/Connecting	the	Powe\f	Co\fd	 ..................\e..................\e..........13
3	 Tu\fning	on	the	P\fojecto\f	 ..................\e..................\e..................\e..................\e..................\e...... 14
Note	on	Sta\ftup	sc\feen	(Menu	Language	Select	sc\feen)	 ..................\e..................\e...15
4	Selecting	a	Sou\fce	 ..................\e..................\e..................\e..................\e..................\e............. 16
Selecting	the	compute\f	o\f	video	sou\fce	 ..................\e..................\e..................\e............ 16
5	 Adjusting	the	Pictu\fe	Size	and	Position	 ..................\e..................\e..................\e..................\e 17
Adjusting	the	ve\ftical	position	o\b	a	p\fojected	image	(Lens	shi\bt)	 ..................\e...........18
Focus	 ..................\e..................\e..................\e..................\e..................\e..................\e.......... 19
Applicable	lens: 	PJ	Replacement	Lens	 Type1	..................\e..................\e..................\e. 20
Zoom	 ..................\e..................\e..................\e..................\e..................\e..................\e.......... 21
Adjusting	the	 Tilt	Feet	..................\e..................\e..................\e..................\e..................\e... 21
6	Co\f\fecting	Keystone	Disto\ftion	 ..................\e..................\e..................\e..................\e............ 22
7	Optimizing	Compute\f	Signal	 Automatically	..................\e..................\e..................\e............ 24
Adjusting	the	Image	Using	 Auto	Adjust	 ..................\e..................\e..................\e............ 24
8	 Tu\fning	Up	o\f	Down	 Volume	..................\e..................\e..................\e..................\e................ 24
9	 Tu\fning	o\b\b	the	P\fojecto\f	 ..................\e..................\e..................\e..................\e..................\e..... 25
	 A\bte\f	Use	 ..................\e..................\e..................\e..................\e..................\e..................\e.......... 26
3. Convenient Feat\uures	..................\e..................\e..................\e..................\e............. 27
1	 Tu\fning	o\b\b	the	Image	and	Sound	 ..................\e..................\e..................\e..................\e......... 27
2	F\feezing	a	Pictu\fe	 ..................\e..................\e..................\e..................\e..................\e.............. 27
3	Enla\fging	a	Pictu\fe	 ..................\e..................\e..................\e..................\e..................\e............ 27
4	Changing	Eco	Mode/Checking	Ene\fgy-Saving	E\b\bect	Using	Eco	Mode	 [LAMP	POWER]	 ..................\e..................\e..................\e..................\e..................\e........... 28
Checking	Ene\fgy-Saving	E\b\bect	[CARBON	METER]	 ..................\e..................\e..........29