Ricoh Projector PJ X3241N User Manual

Preparations
Operations
Maintenance
Others
Network/ 
USB memory
Before Using
For safe and correct use, be sure to read “Before Using” before using the machine.
In the spaces provided below, record the Model and Serial No. located at the bottom of 
your projector.
Model No.      Serial No.   
Retain this information for future reference.
PJ X3241N
PJ WX3231N
DATA PROJECTOR
OWNER’S MANUAL 



SAFETY PRECAUTIONS
The  lightning  flash  with  arrowhead  symbol,  within  an  equilateral  tr iangle,  is 
intended  to  aler t  the  user  to  the  presence  of  uninsulated  “dangerous  voltage” 
within  the  product’s  enclosure  that  may  be  of  sufficient  magnitude  to  constitute  a 
risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert the user to 
the  presence  of  important  operating  and  maintenance  (servicing)...

3
Before Using

- Reorient or relocate the receiving antenna.
-  Increase the separation between the equipment and receiver.
-  Connect the equipment into an outlet on a circuit different from that to which the receiver 
is connected.
- Consult the sales representative or an experienced radio/TV technician for help.
RESPONSIBLE PARTY:   Ricoh Americas Corporation
 
5 Dedrick Place, West Caldwell, NJ 07006 
Phone: 973-88-000
 
CAUTION:
USA only
Changes  or  modifications  made  to  this...

4

IMPORTANT SAFETY INSTRUCTIONS
CAUTION:PLEASE READ AND OBSERVE ALL WARNINGS AND 
INSTRUCTIONS GIVEN IN THIS OWNER’S MANUAL AND THOSE 
MARKED ON THE UNIT. RETAIN THIS BOOKLET FOR FUTURE 
REFERENCE.
This  unit  is  fully  transistorized  and  does  not  contain  any  parts  that  can  be  repaired  by  the 
user.
WARNING:DO NOT REMOVE THE CABINET COVER, OR YOU MAY BE 
EXPOSED TO DANGEROUS VOLTAGE. REFER SERVICING TO 
QUALIFIED SERVICE PERSONNEL ONLY.
1.  Read Owner’s Manual
After unpacking this product,...

5
Before Using

5.  Heat
The product should be situated 
away from heat sources such as 
radiators, heat registers, stoves, 
or other products (including 
amplifiers) that produce heat.
6.  Water and Moisture
Do not use this product near water.
- for example, near a bath tub, 
wash bowl, kitchen sink, or laundry 
tub; in a wet basement; or near a 
swimming pool and other similar 
environments.
7.  Cleaning
Unplug this product from the wall 
outlet before cleaning.  Do not use 
liquid cleaners or aerosol...

6

IMPORTANT SAFETY INSTRUCTIONS (Continued)
11.  Lightning storms
For added protection for this 
product during a storm, or when it 
is left unattended and unused for 
long periods of time, unplug it from 
the wall outlet.  This will prevent 
damage to the product due to 
lightning and power-line surges.
Never operate this unit on AC 
power during a thunderstorm. If 
you see lightning or hear thunder, 
never touch the unit, cables and/or 
peripherals. An electric surge 
caused by the storm, may result...

7
Before Using

17. Accessories
Do not place this product on an 
unstable cart, stand, tripod, bracket, 
or table.  The product may fall, causing 
serious injury to a child or adult, and 
serious damage to the product. A 
product and cart combination should 
be moved with care.  Quick stops, 
excessive force, and uneven surfaces 
may cause the product and cart 
combination to overturn.
S315A
18.  Damage Requiring Service
Unplug this product from the wall 
outlet and take the product to qualified...

8

IMPORTANT SAFETY INSTRUCTIONS (Continued)
22. Replacement Parts
When replacement parts are 
required, be sure the service 
technician has used replacement 
parts specified by the manufacturer 
or have the same characteristics 
as the original part.
Unauthorized substitutions may 
result in fire, electric shock, or 
other hazards.
(Only the replacement of the lamp 
should be made by users.)
23.  Safety Check
Upon completion of any service 
or repairs to this product, ask 
the service technician to...

9
Before Using

POWER SUPPLY INFORMATION
If your line voltage is 0 to 40 V, use one of the following types of cable/plug.
PlugconfigurationPlug type
Australian40 V10 A
North American40 V15 A
Switzerland40 V6 A
Line voltage
EURO
UK
0 – 40 V
0 – 40 V
00 – 40 V
00 – 40 V
00 – 40 V
PlugconfigurationPlug typeLine voltage
Use a 5 A fuse which is approved by ASTA or BSI to BSI36.Always replace the fuse cover after...

10

IMPORTANT PRECAUTIONS (Continued)
LCD Panel
If the air filter is stained or clogged, the main unit inner temperature rises. As a result, the 
life of the LCD is shortened and a malfunction may also occur. 
Clean the air filter from time to time and replace it regularly. It is recommended that you 
replace the filter at the time you replace the lamp. (Ask your sales representative where 
the unit was purchased or your nearby service station about an air filter for replacement.)
EXEMPTION CLAUSES...