Home > Roland > Printer > Roland XJ 740 User Manual

Roland XJ 740 User Manual

    Download as PDF Print this page Share this page

    Have a look at the manual Roland XJ 740 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 10 Roland manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    							89Chapter 5 Feature Reference
    5-7 Setting How the Auxiliary Drying Unit Operates
    When the optionally available auxiliary drying unit is installed, use the setting menus on the machine to set how the
    drying unit operates. For detailed information about the auxiliary drying unit, refer to the users manual for drying unit.
    Switching the Drying-heater Unit On and Off
    Procedure
    Hold down and press.
    Press
    twice.
    Press.
    Use
    to select ENABLE or DISABLE.
    Press
    .
    Press.
    Press
    to go back to the original screen.
    Description
    This switches the auxiliary drying units drying-heater unit on or off.
    The temperature setting for the drying-heater unit is based on the setting made on the machine. After youve com-
    pleted installation of the auxiliary drying unit, set the machines [OPTION DRYER] menu item to ENABLE.
    Default Setting
    [OPTION DRYER]: DISABLE
    Switching the Blower-fan Unit On and Off
    Procedure
    Hold downand press.
    Press
    .
    Press.
    Use
    to select ENABLE or DISABLE.
    Press
    .
    Press.
    Press
    to go back to the original screen.
    Description
    This switches the auxiliary drying units blower-fan unit on or off. After youve completed installation of the auxiliary
    drying unit, set the machines [BLOWER FAN] menu item to ENABLE.
    Default Setting
    [BLOWER FAN]: DISABLE
    HEATER MENU
    OPTION DRYER
    OPTION DRYER
    DISABLE     ENABLE
    W 1839mm
    SETUP SHEET
          ROLL
    W 1839mm
    SETUP SHEET
          ROLL
    HEATER MENU
    BLOWER FAN
    BLOWER FAN
    DISABLEENABLE
    Downloaded4From4ManualsPrinteracom4Manuals 
    						
    							90Chapter 5 Feature Reference
    5-8 Saving the Printer Settings to Match the Media
    Saving Optimized Media Settings As Preset Values
    Procedure
    Press.
    Press.
    Press
    .
    Press.
    Use
    to select any one from NAME1 to NAME8.
    Press
    to save.
    The present menu settings are saved in the preset you chose in step .
    Press.
    Press
    to go back to the original screen.
    Description
    Using the [PRESET] menu item lets you easily change a wide variety of settings to optimize them for the media.
    Making changes for each menu item every time you change the media can be troublesome. Thats why it can be useful
    to save the menu-item settings optimized for an often-used type of media as a preset. The next time you use the media,
    you can change the menu-item settings to the optimal values for the media simply by loading the preset you saved.
    Menu items that can be saved in presets are listed on the below.
    You can save up to eight presets. You can assign a name to each preset. Using media names may aid recognition and
    clarity.
     P. 91, Loading a Saved Preset, p. 91, Assigning a Name to a Preset
    MENU
    PRESET
    PRESET
    SAVE
    SAVE
    NAME1
    W 1839mm
    SETUP SHEET
          ROLL
    Menu item Page to see
    [ADJUST BI-DIR SIMPLE SETTING] P. 82, Correcting for Misalignment in Bidirectional Printing
    [ADJUST BI-DIR DETAIL SETTING] P. 83, Correcting for Misalignment in Bidirectional Printing More Precisely
    [ALTERNATE HEAD] P. 78, Giving Priority Efficient Ink Use During Operation
    [BLOWER FAN] P. 89, Switching the Blower-fan Unit On and Off
    [CALIBRATION] P. 85, Performing Feed Correction to Alleviate Horizontal Bands and the Like
    [FEED FOR DRY] P. 88, Drying the Trailing Edge of the Printing Area on the Dryer
    [FULL WIDTH S] P. 74, Speeding Up Printing for Narrow Media
    [MEDIA RELEASE] P. 75, Using Sticky Media
    [PRE], [PRINT], [DRYER] P. 34, Making the Temperature Setting for the Media Heating System
    [PREHEATING] P. 87, Determining How the Media Heating System Operates
    [SCAN INTERVAL] P. 73, Printing Hard-to-dry Media
    [SHEET TYPE],  [SHEET WIDTH],
    [SHEET POS.]P. 71, Using Transparent Media
    [SIDE MARGIN] P. 70, Expanding the Printing Area by Reducing the Margins
    [VACUUM POWER] P. 73, Preventing Media from Coming Loose
    Downloaded From ManualsPrinter.com Manuals 
    						
    							Chapter 5 Feature Reference91
    5-8 Saving the Printer Settings to Match the Media
    Loading a Saved Preset
    Procedure
    Press.
    Press twice.
    Use
    to select the name of a preset you want to load.
    Pressto load.
    The settings are changed and the screen shown in the figure appears.
    Description
    This loads a saved preset. You can select any one of eight types of presets. (When no names have been assigned, you
    select from among NAME1 through NAME8.)
    If you load a preset while
    is illuminated,goes dark. To start printing, pressonce more and redo
    the preparations for printing.
    Assigning a Name to a Preset
    Procedure
    Press.
    Press
    .
    Press
    twice.
    Press.
    Use
    to select any one from NAME1 to NAME8.
    Press.
    Use
    to enter a character.
    Press.
    Use
    to enter the next character.
    Enter the following characters in the same way.
    When youre finished entering text, press
    .
    	Press.
    Press
    to go back to the original screen.
    Description
    This assigns a name to a saved preset. Using media names may aid recognition and clarity.
    The characters you can enter are A through Z, 0 through 9, and the - character. You can enter up to 15
    characters, including spaces.
    MENU
    PRESET
    LOAD
    NAME1
    SETUP SHEET
          ROLL
    PRESET
    NAME
    NAME
    NAME1
    NAME
    S_
    NAME
    SAMPLE_
    W 1839mm
    SETUP SHEET
          ROLL
    Downloaded4From4ManualsPrinteracom4Manuals 
    						
    							92Chapter 5 Feature Reference
    5-9 Making the Network Settings
    Setting the IP Address, Subnet Mask, Etc.
    Procedure
    Press.
    Press
    several times.
    Press.
    Press
    .
    Press.
    Use
    to choose the item whose setting you want to make.
    Presstwice.
    Use
    to select the address number.
    	Press.
    
    Repeat  and 	 to set all the address numbers.
    When you have finished making the setting, press
    .
    Press.
    Press
    to go back to the original screen.
    Description
    Make sure the machine is connected to the network by an Ethernet cable.
    For detailed information about the settings, consult your network administrator.
    [IP ADDRESS]: IP address
    [SUBNET MASK]: Subnet mask
    [GATEWAY ADDR.]: Gateway address
    W 1839mm
    SETUP SHEET
          ROLL
    MENU
    SYSTEM INFO.
    SYSTEM INFO.
    NETWORK
    IP ADDRESSS
    000 . 000 . 000 . 000
    IP ADDRESS
    192 . 168 . 000 . 003
    IP ADDRESS
    192 . 000 . 000 . 000
    NETWORK
    IP ADDRESS
    Downloaded4From4ManualsPrinteracom4Manuals 
    						
    							93Chapter 5 Feature Reference
    5-10 Viewing Information about the Media and the System
    Displaying the Amount of Media Remaining
    Procedure
    Press.
    Press
    .
    Press.
    Press
    .
    Press.
    Use
    to set the amount of media remaining.
    Press
    to enable the setting.
    Press.
    Press
    to go back to the original screen.
    Description
    You can display how much of the media in use is left. Once you set the amount of media remaining, the amount
    remaining is displayed at the top menu until it reaches zero. If you cancel the setup such as by removing the media ,
    the amount remaining at that time flashes on the screen.
    The amount of media remaining is not updated automatically when you change the media. Redo the setting whenever
    you change the media.
    You can also make the setting display this menu item automatically whenever you change the media. See the next
    section, Verifying the Setting for the Amount Remaining Every Time the Media Is Changed.
    Note: The remaining amount that is displayed is only an estimate, and its accuracy is not assured.
    Verifying the Setting for the Amount Remaining Every Time the Media Is Changed
    Procedure
    Press.
    Press
    .
    Press.
    Press
    twice.
    Press.
    Use
    to select ENABLE.
    Press
    to enable the setting.
    Press.
    Press
    to go back to the original screen.
    SETUP SHEET
          ROLL            L 25.0 m
    MENU
    SHEET REMAIN
    SHEET REMAIN
    SET LENGTH
    SET LENGTH
    0.0 m     25.0 m
    W 1839 mm      L 25.0 m
    MENU
    SHEET REMAIN
    SHEET REMAIN
    AUTO DISPLAY
    AUTO DISPLAY
    DISABLE     ENABLE
    This display is updated.
    If setup has not been performed,
    the set value flashes.
    W 1839mm
    SETUP SHEET
          ROLL
    Downloaded4From4ManualsPrinteracom4Manuals 
    						
    							Chapter 5 Feature Reference94
    5-10 Viewing Information about the Media and the System
    Description
    Setting this to ENABLE automatically displays the [SHEET REMAIN] menu item whenever you change the media and
    finish setup. This makes it impossible to go on to the next operation unless you redo the setting for the amount
    remaining. This can be useful for keeping you from forgetting to redo the setting when you change the media.
    When you set this to ENABLE, however, be sure also to set the [SHEET TYPE] menu item to OPAQUE. When the
    [SHEET TYPE] menu item is set to OPAQUE, then the [SHEET REMAIN] menu item is not displayed automatically,
    regardless of the setting for the [AUTO DISPLAY] menu item.
     P. 71, Using Transparent Media
    Default Setting
    [AUTO DISPLAY]: DISABLE
    Printing the Amount of Remaining Media
    Procedure
    Press.
    Press
    .
    Press.
    Press
    to perform printing.
    Press.
    Press
    to go back to the original screen.
    Description
    This prints the amount of media remaining that is displayed at the top menu. You use this when you want to make a
    record of the remaining length of the media now in use. Printing the amount of media remaining before you change
    the media enables you to refer to the printed record and use the value to make the setting for the remaining amount the
    next time you use the media.
    Printing a System Report
    Procedure
    Press.
    Press
    several times.
    Press.
    Press
    several times.
    Press
    to start printing.
    Press.
    Press
    to go back to the original screen.
    Description
    This prints system information, including a list of setting values.
    SHHET REMAIN
    PRINT MEMO
    MENU
    SHEET REMAIN
    W 1839 mm      L 25.0 m
    W 1839mm
    SETUP SHEET
          ROLL
    MENU
    SUB MENU
    SUB MENU
    SYSTEM REPORT
    Downloaded4From4ManualsPrinteracom4Manuals 
    						
    							Chapter 5 Feature Reference95
    5-10 Viewing Information about the Media and the System
    Viewing the Serial Number, Firmware Version, and Other Information
    Procedure
    Press.
    Press
    several times.
    Press.
    Use
    to choose the information you want to view.
    Press.
    Press.
    Press
    to go back to the original screen.
    Description
    You can view the following information.
    [MODEL]: Model name
    [SERIAL NO.]: Serial number
    [INK]: Ink type
    [FIRMWARE]: Firmware version
    Viewing the Network Settings
    Procedure
    Press.
    Press
    several times.
    Press.
    Press
    .
    Press.
    Use
    to choose the information you want to view.
    Press.
    	Press.
    Press
    to go back to the original screen.
    Description
    You can view the following information.
    [IP ADDRESS]: IP address
    [SUBNET MASK]: Subnet musk
    [GATEWAY ADDR.]: Gateway address
    [MAC ADDRESS]: MAC address
    W 1839mm
    SETUP SHEET
          ROLL
    MENU
    SYSTEM INFO.
    SYSTEM INFO.
    SERIAL NO.
    SERIAL NO.
    ZS00001
    MENU
    SYSTEM INFO.
    SYSTEM INFO.
    NETWORK
    NETWORK
    IP ADDRESS
    IP ADDRESS
    192 . 168 . 000 . 003
    W 1839mm
    SETUP SHEET
          ROLL
    Downloaded4From4ManualsPrinteracom4Manuals 
    						
    							96Chapter 5 Feature Reference
    5-11 Performing Maintenance
    Draining Ink and Performing Internal Washing
    Procedure
    Press.
    Press
    several times.
    Press.
    Press
    twice.
    Press.
    Press
    twice.
    Press
    to execute.
    Description
    This drains the ink inside the printer and washes the interior using cleaning cartridges as a preliminary for moving the
    printer or conducting maintenance. This operation requires eight unused cleaning cartridges. The screen displays
    information such as instructions to insert and remove cartridges. Follow these instructions to carry out the procedure.
    After finishing washing, the sub power is switched off.
    You do not need to carry this out as part of your daily maintenance activities.
    Draining Ink Remaining Inside the Machine
    Procedure
    Press.
    Press
    several times.
    Press.
    Press
    twice.
    Press.
    Press
    .
    Press
    to execute.
    Description
    This removes ink inside the printer as a preliminary procedure for performing maintenance. The screen displays infor-
    mation such as instructions to insert and remove cartridges. Follow these instructions to carry out the procedure. After
    finishing the procedure, the sub power is switched off.
    You do not need to carry this out as part of your daily maintenance activities.
    MENU
    SUB MENU
    MENU
    SUB MENU
    SUB MENU
    INK CONTROL
    INK CONTROL
    HEAD WASH
    INK CONTROL
    PUMP UP
    SUB MENU
    INK CONTROL
    Downloaded4From4ManualsPrinteracom4Manuals 
    						
    							Chapter 5 Feature Reference97
    5-11 Performing Maintenance
    Downloaded From ManualsPrinter.com Manuals 
    						
    							98Chapter 5 Feature Reference
    5-12 Menu List
    Main Menu
    MENU
    PRESETPRESET
    LOAD
    PRESET
    SAVE
    LOAD
    NAME1
    LOAD
    NAME2
      To [SHEET REMAIN]  To [NAME]
    LOAD
    NAME4
    LOAD
    NAME6
      To [NAME8]
      To [NAME1]
    SAVE
    NAME1
    SAVE
    NAME2
    SAVE
    NAME4
    SAVE
    NAME6
      To [NAME8]
      To [NAME1]
    Continued Continued
    Press 
    LOAD
    NAME3
    LOAD
    NAME5
    LOAD
    NAME7
    LOAD
    NAME8
    SAVE
    NAME3
    SAVE
    NAME5
    SAVE
    NAME7
    SAVE
    NAME8
    Continued
     P. 90
     P. 91
    Downloaded From ManualsPrinter.com Manuals 
    						
    All Roland manuals Comments (0)

    Related Manuals for Roland XJ 740 User Manual