Ruger 10/17 Instruction Manual
Have a look at the manual Ruger 10/17 Instruction Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 48 Ruger manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
32 SERVICE AND PARTS POLICY If you have any question regarding the performance of your RUGER® MODEL 10/22®or 10/17TMrifle or carbine please write or call (603-865- 2442) our Product Service Department in Newport, New Hampshire 03773, fully describing all circumstances and conditions involved. If you should return your rifle to the factory for repair, or order parts for it, please comply with the following suggestions for prompt service: WARNING: BEFORE SHIPPING ANY FIREARM, BE ABSOLUTELY CERTAIN THAT IT AND ITS MAGAZINE ARE UNLOADED. DO NOT SHIP CARTRIDGES WITH A FIREARM. SHIPPING FIREARMS FOR REPAIR RUGER®MODEL 10/22®and 10/17TMrifles and carbines returned to the factory for repair should be sent to: Sturm, Ruger & Company, Inc., Product Service Department, 411 Sunapee St., Newport, New Hampshire 03773. Telephone (603) 865-2442. Guns should be sent prepaid. We will not accept collect shipments. The Federal Gun Control Act, as well as the laws of most States and localities, do not prohibit an individual (who is not otherwise barred from purchasing or possessing a firearm) from shipping a firearm directly to the manufacturer for repair. However, before you ship your rifle to us, be certain that your State or locality does not have a law or regulation which will prohibit you from receiving the rifle from us after it has been repaired. If such receiving is prohibited, then please have a Federally Licensed firearms dealer ship the gun to us. If your rifle is sent to us by a dealer, it will be returned to him after being repaired. If a handgun (pistol or revolver) is shipped by an individual who does not hold a Federal Firearms License, it must be shipped via U.P.S.(Next Day Air). Persons who do not hold a Federal Firearms License are prohibited by Federal law from shipping a handgun by Mail. Handguns mailed in violation of the law are impounded by the Post Office. Please do not include a rifle case, sling, telescopic sights or custom accessories with a firearm being shipped to the factory for service. DO NOT SEND GUN BOXES OR LITERATURE THAT YOU CONSIDER TO BE COLLECTOR’S ITEMS – THESE ARE INVARIABLY DAMAGED OR DESTROYED IN SHIPMENT.Rifles and shotguns may be shipped via Parcel Post. Always insure your shipment. Enclose a letter that includes your name, address, telephone number, serial number and model of the firearm. Describe in detail the trouble you have experienced with your firearm, or the work you wish to have done. Merely stating that the firearm “needs repair” is inadequate information.
It is the purchaser’s responsibility to be absolutely certain that any parts ordered from the factory are correctly fitted and installed. Firearms are complicated mechanisms and IMPROPER FITTING OF PARTS MAY RESULT IN A DANGEROUS MALFUNCTION, DAMAGE TO THE FIREARM, AND SERIOUS INJURY TO THE SHOOTER AND OTHER PERSONS. The purchaser and installer of parts must accept full responsibility for the correct adjustment and functioning of the firearm after such installation. PARTS MUST FIT CORRECTLY WARNING – PARTS PURCHASERS 33 Work performed will bear a net minimum labor charge of $20.00 plus a $12.00 shipping and handling charge. The charge for rebluing the RUGER®MODEL 10/22®and 10/17TMrifles and carbines is $50.00 plus a $12.00 shipping and handling charge. Custom gunsmithing service or nonstandard alterations are NOT AVAILABLE from Ruger Product Service Departments. ORDERING PARTS Please contact the New Hampshire Product Service Department for parts availability and current prices. All parts ordered for the RUGER®MODEL 10/22®or 10/17TMshould be sent to: Sturm, Ruger & Co., Inc., Product Service Department, 411 Sunapee Street, Newport, New Hampshire 03773, 603- 865-2442. We cannot comply with open account or C.O.D. orders. Payment in the form of a check, money order, Visa or Mastercard must accompany your order. Credit Card orders must include the account number, expiration date and whether it is a Visa or Mastercard account. Minimum parts order is $1.00 plus $3.50 shipping and handling charge. Order parts by Part Name and Part Number and include the entire serial number of the firearm for which the parts are being ordered. There is a minimum net labor charge of $20.00 plus $12.00 shipping and handling charge if the parts are factory fitted. All factory fitted parts are fit on an exchange basis only. We will not return the replaced parts. Because the receiver is a serial numbered component, it is defined as a “firearm” by Federal law and is not sold as a separate component. *Parts designated by an asterisk must be factory fitted. These parts are fitted on an exchange basis only. We will not return the replaced parts. We will not return any part that is broken, malfunctioning, badly worn or has been modified. See “Warning – Parts Purchasers” above. CAUTION: A gun containing modified, broken, malfunctioning, or badly worn parts should not be fired.
34 RUGER ® MODEL 10/22 ® & 10/17 TM RIFLES PARTS LIST Design, prices and specifications subject to change without notice. SPECIFY MODEL AND CALIBER WHEN ORDERING (See Exploded Views on Pages 41 - 46) Part Name Part No. Model Barrel 0B8001 Standard, Deluxe Sporter & All-Weather - Blued Models Barrel K0B8001 Standard & All-Weather - Stainless Models Barrel 0B8003 Target - Blued Model Barrel K0B8003 Target - Stainless Model Barrel K0B8006 Target - Silhouette Model Barrel 0B8004 10/22 Magnum Barrel 0B8009 10/22 RR Barrel 0B8008 10/17 RBR Barrel Band B-68 Standard & All-Weather - Blued Models Barrel Band L06801 10/22 Magnum Barrel Band, Clear Coated B06802 Standard & All-Weather - Stainless Models Barrel Band Screw B-69 Standard, All-Weather & 10/22 Magnum Barrel Retainer, V-Block B-66 All Models Barrel Retainer Screw, 2 Req’d. B-67 All Models Bolt Only B-10 All Models except 10/22 Magnum & 10/17 RBR Bolt Only B01006 10/22 Magnum Bolt Only B01004 10/17 RBR Bolt Assembly, Complete B-10A Standard, All-Weather & 10/22 RR Standard Finish
35 Part Name Part No. Model Bolt Assembly, Complete B-10C Deluxe Sporter & Target Models Color Buffed Bolt Assembly, Complete B21006 10/22 Magnum Bolt Assembly, Complete B21004 10/17 RBR Bolt Lock B-41 All Models except 10/22 Magnum & 10/17 RBR Bolt Lock B04106 10/22 Magnum & 10/17 RBR Bolt Lock Spring B-42 All Models Bolt Stop Pin B-46 All Models except 10/22 Magnum & 10/17 RBR Bolt Stop Pin B04600 10/22 Magnum & 10/17 RBR Butt Plate C-63 Standard & 10/22 Magnum Butt Plate B06301 10/22 RR & 10/17 RBR Butt Plate Screw, 2 Req’d. B-64 Standard & 10/22 Magnum Butt Plate Screw, 2 Req’d. B-91 10/22 RR & 10/17 RBR Cocking Handle, Guide Rod & B-48A All Models except 10/22 Magnum & 10/17 RBR Recoil Spring Assembly Cocking Handle, Guide Rod & B20705 10/22 Magnum & 10/17 RBR Recoil Spring Assembly Disconnector B-25 All Models Disconnector Spring B-24 All Models Disconnector & Trigger Pivot Pin KE02800 All Models Ejector B-8 All Models Ejector Cross Pin, Not Illustrated B-22 All Models Escutcheon, Not Illustrated B-51 All Models Extractor B-14 All Models Extractor Plunger B-16 All Models
Part Name Part No. Model Extractor Spring B-15 All Models Firing Pin B-11 All Models except 10/22 Magnum & 10/17 RBR Firing Pin B01106 10/22 Magnum & 10/17 RBR Firing Pin Rebound Spring A20000 All Models except 10/22 Magnum Firing Pin Rebound Spring B-12 10/22 Magnum Firing Pin Stop Pin B-13 All Models Front Mounting Screw J04701 10/22 Magnum Front Sight B27501 Standard, Deluxe Sporter & All-Weather Models Front Sight J06001 10/22 Magnum Front Sight J06000 10/17 RBR Front Sight Base B06001 10/17 RBR Front Sight Blade B07502 10/22 RR Hammer B-17A All Models except Target Model Hammer B01703 Target Hammer Bushing, 2 Req’d. B-43 All Models Hammer Pivot Pin B-19 All Models Hammer Spring B-44 All Models except 10/22 Magnum & 10/17 RBR Hammer Spring B04406 10/22 Magnum & 10/17 RBR Hammer Strut B-18 All Models Hammer Strut Washer B-45 All Models Magazine, Complete, BX-1 All Models except 10/22 Magnum & 10/17 RBR 10-Shot Capacity Magazine, Complete, JMX-1 10/22 Magnum & 10/17 RBR 10-Shot Capacity 36
Part Name Part No. Model Magazine, Complete, BX-1-5 All Models except 10/22 Magnum & 10/17 RBR 5-Shot Capacity Magazine Latch B-34 All Blued Models Magazine Latch B03401 All Stainless Models Magazine Latch Pivot & Ejector B-35 All Models Pin, 2 Req’d Magazine Latch Plunger B-36 All Models Magazine Latch Plunger Spring B-37 All Models Pistol Grip Cap Medallion D-82 All-Weather Models Rear Sight, Open B-76 Standard, Deluxe Sporter & All-Weather Models Rear Sight D-77 10/22 Magnum Rear Sight B07700 10/22 RR Rear Sight J06100 10/17 RBR Receiver Cross Pin, 2 Req’d. B-5 All Models Receiver Filler Screws, 4 Req’d., C-83 All Models except 10/22 Magnum & 10/17 RBR Not Illustrated Recoil Pad D06304 Deluxe Sporter & Target Recoil Pad Screws, 2 Req’d. D-84 Deluxe Sporter & Target Safety B-52 All Models Safety Detent Plunger B-53 All Models Safety Detent Plunger Spring B-54 All Models Scope Base Adapter, With 4 Screws SBA All Blued Models except 10/22 Magnum & 10/17 RBR Not Illustrated Scope Base Adapter, Clear Coated KSBA All Stainless Models Not Illustrated 37
Part Name Part No. Model Scope Base Adapter, With 4 Screws NSBA All Blued Models except 10/22 Magnum & 10/17 RBR Weaver-Style Scope Base Adapter, Clear Coated NKSBA All Stainless Models Weaver-Style Scope Base Screws, 4 Req’d., B-89 All Models except 10/22 Magnum & 10/17 RBR Not Illustrated Scope Base Torx® Head Screw, MPF07602 10/22 Magnum & 10/17 RBR 8 Req’d. Scope Rings, Medium S100RM 10/22 Magnum & 10/17 RBR Accomodates 42mm lens Scope Ring Clamp D-74 10/22 Magnum & 10/17 RBR Scope Ring Nut D-73 10/22 Magnum & 10/17 RBR Sear B-23 All Models except Target Model * Sear B02302 Target Sear Spring B-24 All Models Sling Swivel, Front MS07601 Deluxe Sporter Sling Swivel, Front MS07602 Target Sling Swivel, Rear MS07601 Deluxe Sporter, International & Target Stock Assembly, Complete — B-4-1 Standard Birch Stock Assembly, Complete — B00405 Standard Black Laminate — See “Note A” on page 39. Stock Assembly, Complete — B09201 Deluxe Sporter Walnut 38
39 Part Name Part No. Model Stock Assembly, Complete — B00430 Target Laminated American Hardwood Stock Assembly — B30425A All-Weather Synthetic Stock Stock, Black Laminate BOYDS-600-333 Target Silhouette Model Stock Assembly, Complete — B20435 10/22 Magnum Standard Carbine Birch Stock Assembly B00433 10/22 RR Stock Assembly B00434 10/17 RBR Take-Down Screw B-65 All Models except 10/22 Magnum, 10/22 RR & 10/17 RBR Take-Down Screw L04701 10/22 RR & 10/17 RBR To r x® Key Wrench, Not Illustrated MPF07601 10/22 Magnum & 10/17 RBR (for Scope Base Torx® Head Screw) Trigger B-20 All Blued Models Trigger B02001 All Stainless Models Trigger Assembly, Complete B-20D All Blued Models except Target * Trigger Assembly, Complete B02002D Target - Blued Model Trigger Assembly, Complete B02001D Standard & All-Weather - Stainless Models NOTE A:The black laminate stock assembly (B00405) is sold only on an exchange basis. That is, the “old” black laminate stock must accompany the payment and order for a new B00405 stock.
Part Name Part No. Model * Trigger Assembly, Complete B02003D Target - Stainless Models Trigger Guard B-2 All Blued Models except Target Trigger Guard B00202 Target - Blued Model Trigger Guard B00201 Standard & All-Weather - Stainless Models Trigger Guard B00203 Target - Stainless Model Trigger Guard Assembly, Complete B-2C Al Blued Models except Target, 10/22 Magnum & 10/17 RBR Trigger Guard Assembly, Complete B00202C Target - Blued Model Trigger Guard Assembly, Complete B-2M 10/22 Magnum & 10/17 RBR Trigger Guard Assembly, Complete B00201B Standard & All-Weather - Stainless Models Trigger Guard Assembly, Complete B00203C Target - Stainless Model Trigger Pivot Pin B-21 All Models Trigger Plunger B-39 All Models Trigger Plunger Spring B-40 All Models * PARTS SO MARKED MUST BE FACTORY FITTED 40