Home > Runco > Projector > Runco Cl 610lt Projector User Manual

Runco Cl 610lt Projector User Manual

Here you can view all the pages of manual Runco Cl 610lt Projector User Manual. The Runco manuals for Projector are available online for free. You can easily download all the documents as PDF.

Page 31

31Runco CL-610 Owner’s Operating Manual

On-Screen Display Menus
Using the MenuINFORVR
ENTER
EXITMENU
T h i s   u n i t   i s   e q u i p p e d   w i t h   a n   o n - s c re e n 
display (OSD) menu for making adjustments 
and changing settings. There are five menu 
languages; see the Language setting under 
“Installation” on page 35.
•  Press the  Menu button to turn on/off the OSD menu.
  NOTE: If the Main Menu is displayed, you can also press 
Exit to turn it off.
•  Use the arrow buttons ( ▲,◄,▼,►)...

Page 32

32Runco CL-610 Owner’s Operating Manual

On-Screen Display Menus
Picture Quality 
Adjustments
To access the picture quality adjustments, press Menu, highlight the active source and 
press  Enter  or ►. The picture quality sub-menu then appears (see above).
To adjust a setting, highlight it with the 
▲  or ▼ button and press  Enter to activate a 
scroll bar for that setting. Use the ◄ or ► keys to change the setting. When finished, 
press  Exit. 
Select  Brightness  to adjust the black level of the...

Page 33

33Runco CL-610 Owner’s Operating Manual

The CL-610 has six memory settings for Color Temperature. Four of these settings 
are factory set to default as follows:
 0 -- Original lamp color temperature
 1 -- 5400 kelvins
 2 -- 6500 kelvins
 3 -- 8500 kelvins
 4 -- Custom
 5 -- Custom
Custom 4 and 5 memory are installer-adjustable and can be used to create custom 
settings. There are nine adjustable “white balance” parameters available for the Custom 
4 and 5 settings (three each for red, green and blue)....

Page 34

34Runco CL-610 Owner’s Operating Manual

Aspect Ratio
To access the Aspect Ratio adjustments, press Menu, then press the ▲ or ▼ arrows 
to highlight  Aspect Ratio  and press Enter. The Aspect Ratio sub-menu then appears 
(see above).
There are six aspect ratios available that can be selected for video signal inputs:
Aspect Ratio
Anamorphic (16:9)
 
Standard (4:3) 
Letterbox
Virtual Wide
Cinema
Virtual Cinema
Runco CL-610
>   Video
  S-Video
  Component1
  Component2
  RGB-HD
  HDMI...

Page 35

35Runco CL-610 Owner’s Operating Manual

On-Screen Display Menus
• CINEMA
The  image  in  the  Letterbox  mode  is 
enlarged to a 16x9 image and the upper 
and lower portions are compressed.
• VIRTUAL CINEMA
A 2.35 image is stretched vertically in 
both directions to fill a 16:9 image.
Aspect Ratio (continued)
Runco CL-610
>  Video
  S-Video
  Component1
  Component2
  RGB-HD
  HDMI
------------------------
  Aspect Ratio
  Installation
  Option
  Setup
  ISF Calibration
Installation
Language
Picture...

Page 36

36Runco CL-610 Owner’s Operating Manual

Language
> English    
  Francais
  Espanol
  Deutsch
  Italiano
Press the ▲  or  ▼ arrows to select from the available 
Languages :  English,  French,  Spanish,  German  and 
Italian.
Picture Orientation
> Floor Front    
  Ceiling Front
  Floor Rear
  Ceiling Rear
Keystone Adjust
   -              +      0
Background Color
>  Blue    
  White
RS-232 Baud Rate
>  9600
  38400
  115200
Blue Image
>  Off
  On
Language ➤
Picture Orientation ➤
Keystone Adjust ➤...

Page 37

37Runco CL-610 Owner’s Operating Manual

Runco CL-610
>  Video
  S-Video
  Component1
  Component2
  RGB-HD
  HDMI
------------------------
  Aspect Ratio
  Installation
  Option
  Setup
  ISF Calibration
Option
Reset Image Settings
Sleep T imer
Lamp Hours
OSD T imer
OSD Position
PC & HD Adjust
PIP/PBP Set Up
DNR
On-Screen Display Menus
Option
To access the Option adjustments, press  Menu, then press the ▲ or  ▼ arrows to 
highlight  Option and press  Enter. The Option sub-menu will then appear (see...

Page 38

38Runco CL-610 Owner’s Operating Manual

On-Screen Display Menus
PC & HD Adjust
Auto       Yes?
Freq.           0
Phase       +10
H.Pos.           0
V.Pos.           0
Press  Enter to display the  PC & HD Adjust  menu. Use these 
settings to fine-tune 480p and higher-resolution signals for 
optimum picture quality.
• Auto:  Adjusts  the  phase,  frequency  and  position 
automatically.
•  Freq.:  Adjusts the frequency of the signal.
• Phase:  Adjusts the phase of the input signal (similar to 
tracking...

Page 39

39Runco CL-610 Owner’s Operating Manual

On-Screen Display Menus
SetupTo access advanced picture quality adjustments, use the up- or down-arrow keys to 
highlight Set Up and press  Enter. Use the number buttons on the remote to enter the 
Set Up menu passcode when prompted and press  Enter again. Then, press MENU 
on the remote control. 
Runco CL-610
>  Video
  S-Video
  Component1
  Component2
  RGB-HD
  HDMI
------------------------
  Aspect Ratio
  Installation
  Option
  Set Up
  ISF Calibration...

Page 40

40Runco CL-610 Owner’s Operating Manual

On-Screen Display Menus
The normal gamma setting of 2.2 is correct for almost all 
signals and conditions. If excess ambient light washes out the 
image and it becomes difficult or impossible to see details in 
dark areas, lower the gamma setting to compensate. This will 
improve contrast while maintaining good details for blacks. 
Conversely, if the image is washed out and unnatural, with 
excessive detail in black areas, increase the setting. Again, 
good gamma...
Start reading Runco Cl 610lt Projector User Manual

Related Manuals for Runco Cl 610lt Projector User Manual

All Runco manuals