Samsung 460ut-b Manual

5. Set a Keyboard for your computer.
6.
The next screen is for setting your monitor.
7. First of all, set a horizontal frequency for your monitor. (You can ent\
er the frequency
directly.)
8. Set a vertical frequency for your monitor. (You can enter the frequency\
 directly.)
9. Enter the model name of your monitor. This information will not affect t\
he actual execution
of X-Window.
10. You have finished setting up your monitor. Execute X-Window after settin\
g other re-
quested hardware. Using the...

MDC Program Installation/Uninstallation
Installation
1Insert the installation CD into the CD-ROM drive.
2Click the MDC Unified  installation program.
 If a software installation window is not displayed  on the main screen, install with the "MDC Unified" 
execution file in the MDC folder on the CD.
 
3Click "Next" in the displayed  Installation Wizard screen.
4In the "License Agreement" window displayed, select "I accept the terms in the license agreement" 
and click...

Connecting to MDC
Using MDC via RS-232C (serial data communications standards)
An RS-232C serial cable must be connected to the serial ports on the PC and monitor.
What is MDC?
Multiple display control "MDC" is an application that allows you to easily control multiple display devices 
simultaneously using a PC. 

Using MDC via Ethernet
Enter the IP for the primary display device and connect the device to the PC. One display device can 
connect to another using an RS-232C serial cable. 

Connection Management
Connection management includes the Connection list and Connection list modification options.
Connection list – Connection list shows the details of the connections such as connection setting (IP/
COM, Port No, MAC, and Connection Type), connection status, Set ID Range, and detected devices. 
Each connection can contain a maximum of 100 devices connected in serial daisy-chain fashion. All the 
LFDs detected in a connection are displayed in the Device list, where the user can make...

Auto Set ID
Auto Set ID feature assigns a Set ID for all the LFDs connected in daisy-chain of a selected connection. 
There can be a maximum of 100 LFDs in a connection. The Set ID is assigned sequentially in the daisy-
chain running from 1 to 99, and then finally to Set ID 0.
Cloning
Using the Cloning feature, you can copy the setting of one LFD and apply it to multiple selected LFDs. 
You can select specific tab categories or all tab categories for cloning, using the copy setting option 
window.  

Command Retry
This feature is used to specify the maximum number of times the MDC command will be retried in case of 
there being no reply or a corrupted reply from an LFD. The retry count value can be set using the MDC 
options window. The retry count value must be between 1-10. The default value is 1.  

Getting Started with MDC
1To start the program, click Start  Programs  Samsung  MDC Unified.
2Click Add to add a display device.
If the connection is established via RS232C, go to Serial and specify the COM Port.