Samsung 460ut-b Manual

							Connections
Connecting a Computer
There are several ways to connect the computer to the monitor. Choose
one from the following options.
   Using the D-sub (Analog) connector on the video card.
• Connect the D-sub to the 15-pin,  [RGB/COMPONENT IN] port on the
back of your LCD Display and the 15 pin D-sub Port on the computer.  Using the DVI (Digital) connector on the video card.
• Connect the DVI Cable to the  [DVI IN] port on the back of your LCD
Display and the DVI port on the computer.  Using the DP (Digital) connector on the video card.
•
Connect the [DP IN] port on the LCD Display to the DP port on the PC
using the DP cable. 
						

							 Note
Select HDMI2 (only with a 460UT-2, 460UT-B model) or  HDMI1 as an input
source when connected to the PC via an HDMI cable.
To obtain normal picture and audio from the PC,  HDMI2 (only with a
460UT-2, 460UT-B model) or  HDMI1 must be selected before PC is se-
lected in Edit Name.
To enable audio when  DVI Device is selected, be sure to establish the
connection using step ( ).
Connect the Audio cable for your LCD Display to the Audio port on the
back of the LCD Display.
Connect the power cord for your LCD Display to the Power port on the
back of the LCD Display. Turn on the power switch.
 Note
Contact a local SAMSUNG Electronics Service Center to buy optional items.
Connecting to Other devices  Note
• AV input devices such as DVD players, VCRs or camcorders as well as your\
 computer
can be connected to the LCD Display. For detailed information on connect\
ing AV input
devices, refer to the contents under Adjusting Your LCD Display.
• The LCD Display s configuration at the back may vary slightly depending\
 on the LCD
Display model.
Connecting an External Monitor Connections
 
 Using the HDMI (Digital) connector on the video card.
• Connect the  [HDMI IN 1] port on the LCD Display to the HDMI port on
the PC using the HDMI cable.