Samsung 943snx User Manual
Here you can view all the pages of manual Samsung 943snx User Manual. The Samsung manuals for Monitor are available online for free. You can easily download all the documents as PDF.
Page 21
![Page 21
Do not fasten the screws too tightly, as this may damage the product or
cause the product to fall, leading to personal injury.
Samsung is not liable for these kinds of accidents.
• Samsung is not liable for product damage or personal injury when a non-
VESA or non-specified wall mount is used or the consumer fails to follow\
the product installation instructions. •
To mount the monitor on a wall, you should purchase the wall mounting
kit that allows you to mount the monitor at least 10 cm away from the...](http://img.usermanuals.tech/thumb/66/52444/w300_samsung_943snx-user-manual-20.png "Page 21
Do not fasten the screws too tightly, as this may damage the product or
cause the product to fall, leading to personal injury.
Samsung is not liable for these kinds of accidents.
• Samsung is not liable for product damage or personal injury when a non-
VESA or non-specified wall mount is used or the consumer fails to follow\
the product installation instructions. •
To mount the monitor on a wall, you should purchase the wall mounting
kit that allows you to mount the monitor at least 10 cm away from the...")
Do not fasten the screws too tightly, as this may damage the product or cause the product to fall, leading to personal injury. Samsung is not liable for these kinds of accidents. • Samsung is not liable for product damage or personal injury when a non- VESA or non-specified wall mount is used or the consumer fails to follow\ the product installation instructions. • To mount the monitor on a wall, you should purchase the wall mounting kit that allows you to mount the monitor at least 10 cm away from the...
Page 22
Using the Stand
Monitor Assembly
Simple Stand
HAS Stand
Dual Hinge Stand
Monitor and Bottom
Attaching a Base This monitor accepts a 75 mm x 75 mm VESA-compliant mounting interface pad. Connections
Page 23
![Page 23
Simple Stand(Dual Hinge Stand)
HAS Stand
A. Monitor
B. Mounting interface pad (Sold separately)
1. Turn off your monitor and unplug its power cord.
2. Lay the LCD monitor face-down on a flat surface with a cushion beneath i\
t to protect the
screen.
3. Remove two screws and then remove the stand from the LCD monitor. 4. Align the mounting interface pad with the holes in the rear cover mounti\
ng pad and secure
it with four screws that came with the arm-type base, wall mount hanger \
or other base. •
Do...](http://img.usermanuals.tech/thumb/66/52444/w300_samsung_943snx-user-manual-22.png "Page 23
Simple Stand(Dual Hinge Stand)
HAS Stand
A. Monitor
B. Mounting interface pad (Sold separately)
1. Turn off your monitor and unplug its power cord.
2. Lay the LCD monitor face-down on a flat surface with a cushion beneath i\
t to protect the
screen.
3. Remove two screws and then remove the stand from the LCD monitor. 4. Align the mounting interface pad with the holes in the rear cover mounti\
ng pad and secure
it with four screws that came with the arm-type base, wall mount hanger \
or other base. •
Do...")
Simple Stand(Dual Hinge Stand) HAS Stand A. Monitor B. Mounting interface pad (Sold separately) 1. Turn off your monitor and unplug its power cord. 2. Lay the LCD monitor face-down on a flat surface with a cushion beneath i\ t to protect the screen. 3. Remove two screws and then remove the stand from the LCD monitor. 4. Align the mounting interface pad with the holes in the rear cover mounti\ ng pad and secure it with four screws that came with the arm-type base, wall mount hanger \ or other base. • Do...
Page 24
![Page 24
{2243SN/2243SNX} Connecting Cables
Connect the power cord for your monitor to the power port on the back o\
f the monitor.
Plug the power cord for the monitor into a nearby outlet. Use a connection appropriate for your computer.
Using the D-sub (Analog) connector on the video card.
• Connect the signal cable to the 15-pin, D-sub port on the back of your m\
onitor. [RGB IN]
Connected to a Macintosh.
• Connect the monitor to the Macintosh computer using the D-sub connection\
cable. Note
If the...](http://img.usermanuals.tech/thumb/66/52444/w300_samsung_943snx-user-manual-23.png "Page 24
{2243SN/2243SNX} Connecting Cables
Connect the power cord for your monitor to the power port on the back o\
f the monitor.
Plug the power cord for the monitor into a nearby outlet. Use a connection appropriate for your computer.
Using the D-sub (Analog) connector on the video card.
• Connect the signal cable to the 15-pin, D-sub port on the back of your m\
onitor. [RGB IN]
Connected to a Macintosh.
• Connect the monitor to the Macintosh computer using the D-sub connection\
cable. Note
If the...")
{2243SN/2243SNX} Connecting Cables
Connect the power cord for your monitor to the power port on the back o\
f the monitor.
Plug the power cord for the monitor into a nearby outlet. Use a connection appropriate for your computer.
Using the D-sub (Analog) connector on the video card.
• Connect the signal cable to the 15-pin, D-sub port on the back of your m\
onitor. [RGB IN]
Connected to a Macintosh.
• Connect the monitor to the Macintosh computer using the D-sub connection\
cable. Note
If the...
Page 25
![Page 25
Using the Stand
Monitor Assembly
Simple Stand
HAS Stand
Dual Hinge Stand
Monitor and Bottom
Attaching a Base This monitor accepts a 100 mm x 100 mm VESA-compliant mounting interface\
pad. Connections](http://img.usermanuals.tech/thumb/66/52444/w300_samsung_943snx-user-manual-24.png "Page 25
Using the Stand
Monitor Assembly
Simple Stand
HAS Stand
Dual Hinge Stand
Monitor and Bottom
Attaching a Base This monitor accepts a 100 mm x 100 mm VESA-compliant mounting interface\
pad. Connections")
Using the Stand
Monitor Assembly
Simple Stand
HAS Stand
Dual Hinge Stand
Monitor and Bottom
Attaching a Base This monitor accepts a 100 mm x 100 mm VESA-compliant mounting interface\
pad. Connections
Page 26
![Page 26
Simple Stand(Dual Hinge Stand)
HAS Stand
A. Monitor
B. Mounting interface pad (Sold separately)
1. Turn off your monitor and unplug its power cord.
2. Lay the LCD monitor face-down on a flat surface with a cushion beneath i\
t to protect the
screen.
3. Remove two screws and then remove the stand from the LCD monitor. 4. Align the mounting interface pad with the holes in the rear cover mounti\
ng pad and secure
it with four screws that came with the arm-type base, wall mount hanger \
or other base. •
Do...](http://img.usermanuals.tech/thumb/66/52444/w300_samsung_943snx-user-manual-25.png "Page 26
Simple Stand(Dual Hinge Stand)
HAS Stand
A. Monitor
B. Mounting interface pad (Sold separately)
1. Turn off your monitor and unplug its power cord.
2. Lay the LCD monitor face-down on a flat surface with a cushion beneath i\
t to protect the
screen.
3. Remove two screws and then remove the stand from the LCD monitor. 4. Align the mounting interface pad with the holes in the rear cover mounti\
ng pad and secure
it with four screws that came with the arm-type base, wall mount hanger \
or other base. •
Do...")
Simple Stand(Dual Hinge Stand) HAS Stand A. Monitor B. Mounting interface pad (Sold separately) 1. Turn off your monitor and unplug its power cord. 2. Lay the LCD monitor face-down on a flat surface with a cushion beneath i\ t to protect the screen. 3. Remove two screws and then remove the stand from the LCD monitor. 4. Align the mounting interface pad with the holes in the rear cover mounti\ ng pad and secure it with four screws that came with the arm-type base, wall mount hanger \ or other base. • Do...
Page 27
![Page 27
{2243LNX} Connecting Cables
Connect the power cord for your monitor to the power port on the back o\
f the monitor.
Plug the power cord for the monitor into a nearby outlet. Use a connection appropriate for your computer.
Using the D-sub (Analog) connector on the video card.
• Connect the signal cable to the 15-pin, D-sub port on the back of your m\
onitor. [RGB IN]
Connected to a Macintosh.
• Connect the monitor to the Macintosh computer using the D-sub connection\
cable. Note
If the monitor and...](http://img.usermanuals.tech/thumb/66/52444/w300_samsung_943snx-user-manual-26.png "Page 27
{2243LNX} Connecting Cables
Connect the power cord for your monitor to the power port on the back o\
f the monitor.
Plug the power cord for the monitor into a nearby outlet. Use a connection appropriate for your computer.
Using the D-sub (Analog) connector on the video card.
• Connect the signal cable to the 15-pin, D-sub port on the back of your m\
onitor. [RGB IN]
Connected to a Macintosh.
• Connect the monitor to the Macintosh computer using the D-sub connection\
cable. Note
If the monitor and...")
{2243LNX} Connecting Cables
Connect the power cord for your monitor to the power port on the back o\
f the monitor.
Plug the power cord for the monitor into a nearby outlet. Use a connection appropriate for your computer.
Using the D-sub (Analog) connector on the video card.
• Connect the signal cable to the 15-pin, D-sub port on the back of your m\
onitor. [RGB IN]
Connected to a Macintosh.
• Connect the monitor to the Macintosh computer using the D-sub connection\
cable. Note
If the monitor and...
Page 28
![Page 28
Monitor and Bottom
Attaching a Base This monitor accepts a 100 mm x 100 mm VESA-compliant mounting interface\
pad. Simple Stand
HAS Stand
A. Monitor
B. Mounting interface pad (Sold separately)
1. Turn off your monitor and unplug its power cord.
2. Lay the LCD monitor face-down on a flat surface with a cushion beneath i\
t to protect the
screen.
3. Remove two screws and then remove the stand from the LCD monitor.
4. Align the mounting interface pad with the holes in the rear cover mounti\
ng pad and...](http://img.usermanuals.tech/thumb/66/52444/w300_samsung_943snx-user-manual-27.png "Page 28
Monitor and Bottom
Attaching a Base This monitor accepts a 100 mm x 100 mm VESA-compliant mounting interface\
pad. Simple Stand
HAS Stand
A. Monitor
B. Mounting interface pad (Sold separately)
1. Turn off your monitor and unplug its power cord.
2. Lay the LCD monitor face-down on a flat surface with a cushion beneath i\
t to protect the
screen.
3. Remove two screws and then remove the stand from the LCD monitor.
4. Align the mounting interface pad with the holes in the rear cover mounti\
ng pad and...")
Monitor and Bottom Attaching a Base This monitor accepts a 100 mm x 100 mm VESA-compliant mounting interface\ pad. Simple Stand HAS Stand A. Monitor B. Mounting interface pad (Sold separately) 1. Turn off your monitor and unplug its power cord. 2. Lay the LCD monitor face-down on a flat surface with a cushion beneath i\ t to protect the screen. 3. Remove two screws and then remove the stand from the LCD monitor. 4. Align the mounting interface pad with the holes in the rear cover mounti\ ng pad and...
Page 29
Using the Software Monitor Driver Note When prompted by the operating system for the monitor driver, insert the CD- ROM included with this monitor. Driver installation is slightly different from one operating system to another. Follow the directions appropriate for the oper- ating system you have. Prepare a blank disk and download the driver program file at the Internet web site shown here. Internet web site : http://www.samsung.com/ (Worldwide) Installing the Monitor Driver (Automatic) 1....
Page 30
Note This monitor driver is under certifying MS logo, and this installation doesn't damage your system. The certified driver will be posted on Samsung Monitor homepage. http://www.samsung.com/ Installing the Monitor Driver (Manual) Microsoft® Windows Vista™‚ Operating System 1. Insert your Manual CD into your CD-ROM drive. 2. Click (Start) and "Control Panel". Then, double-click on "Appearance and Personal- ization". 3. Click "Personalization" and then "Display...