Samsung Camera Dv150f User Manual

							Transferring files to the computer
Playback/Editing  100
Transferring files to your Mac OS computer
When you connect the camera to your Mac OS computer, the computer will 
automatically recognize the device. You can transfer files directly from the camera to 
the computer without installing any programs.
Mac OS 10.5 or later is supported.
1 Turn off the camera.
2 Connect your camera to your Mac OS computer with the USB cable.
You must plug the small end of the USB cable into your camera. If the cable is 
reversed, it may damage your files. The manufacturer is not responsible for any 
loss of data.
3 Turn on the camera.
• The computer recognizes the camera automatically and displays a removable 
disk icon.
4 Double-click the removable disk icon.
5 Drag or save files to your computer. 
						

							Playback/Editing  101
Using programs on a computer
i-Launcher allows you to playback files with Multimedia Viewer and provides links so that you can download useful programs.
6 Turn on the camera.
7 When the pop-up window prompts you to install i-Launcher, select 
Ye s.
• If a pop-up window prompting you to run iLinker.exe appears, run it first.
• When you connect the camera to a computer with i-Launcher installed, the 
program will launch automatically.
8 Follow the on-screen instructions to complete the installation.
• An i-Launcher shortcut will appear on the computer.
• Before installing the program, ensure that the PC is connected to a network.
• To install i-Launcher on your Mac OS computer, click Devices  “ i-Launcher  “ 
Mac  “  iLinker.
Installing i-Launcher
1 On the Home screen, scroll to .
2 Select .
3 Select Connectivity  “ PC Software  “ On .
4 Turn off the camera.
5 Connect the camera to your computer with the USB cable.
You must plug the small end of the USB cable into your camera. If the cable is 
reversed, it may damage your files. The manufacturer is not responsible for any 
loss of data. 
						

							Using programs on a computer
Playback/Editing  102
Available programs when using i-Launcher
OptionDescription
Multimedia Viewer
You can view files with Multimedia Viewer. 
Firmware UpgradeYou can update the firmware of your camera.
Front LCD Animation 
DownloadYou can download animations for the front LCD. 
PC Auto Backup
i-Launcher provides a link for downloading the PC 
Auto Backup program when you connect the camera 
to a computer. You can send photos or videos that you 
captured with the camera to a PC wirelessly.
If you use a Mac OS computer, only Firmware Upgrade and PC Auto Backup are 
available.
Using i-Launcher
i-Launcher allows you to play back files with Multimedia Viewer and provides a link 
to download the PC Auto Backup program.
• The requirements are recommendation only. i-Launcher may not work properly 
even when the computer meets the requirements, depending on the condition 
of your computer.
• If your computer does not meet the requirements, videos may not play correctly. 
The manufacturer is not responsible for any damage that results from using 
unqualified computers such as a computer you assembled yourself. 
						

							Using programs on a computer
Playback/Editing  103
Windows OS Requirements
ItemRequirements
CPU
Intel® Core™ 2 Duo 1.66 GHz or higher/ 
AMD Athlon X2 Dual-Core 2.2 GHz or higher 
RAMMinimum 512 MB RAM (1 GB or more recommended)
OS*Windows XP SP2, Windows Vista, Windows 7, or  
Windows 8
Hard disk capacity250 MB or more (1 GB and above recommended)
Others
• 1024 X 768 pixels, 16-bit color display compatible 
monitor (1280 X 1024 pixels, 32-bit color display 
recommended)
• USB 2.0 port
• nVIDIA Geforce 7600GT or higher/ 
ATI X1600 series or higher
• Microsoft DirectX 9.0c or higher
*   A 32-bit version of i-Launcher will be installed—even on 64-bit editions of Windows XP,  Windows Vista, Windows 7, and Windows 8.
Mac OS requirements
Item Requirements
OS
Mac OS 10.5 or higher
RAMMinimum 256 MB RAM (512 MB or more recommended)
Hard disk capacityMinimum 110 MB
OthersUSB 2.0 port
Opening i-Launcher
On your computer, select Start  “ All Programs  “ Samsung  “ i-Launcher  “ 
Samsung i-Launcher . On your Mac, click Applications  “ Samsung  “ i-Launcher. 
						

							Using programs on a computer
Playback/Editing  104
Using Multimedia Viewer
Multimedia Viewer allows you to play back files. From the Samsung i-Launcher screen, click Multimedia Viewer. 
• Multimedia Viewer supports the following formats: 
-Videos: MP4 (Video: H.264, Audio: AAC), WMV (WMV 7/8/9), AVI (MJPEG) 
-Photos: JPG, GIF, BMP, PNG, TIFF, MPO
• Files that have been recorded with other manufacturers’ devices may not play back smoothly.
Viewing photos
67
90
!8 54 3
1
2
66%66%No. Description
1File name
2Enlarged area
3Histogram
4Open the selected file.
5Histogram button
6Rotate to the left/Rotate to the right.
7Move to the previous file/Move to the next file.
8Fit the photo to the screen.
9View the photo in its original size. 
0Zoom in/Zoom out
!Switch between 2D and 3D mode.  
						

							Using programs on a computer
Playback/Editing  105
Viewing videos
6
85 43
1
2
7
No. Description
1File name
2Adjust the volume.
3Open the selected file.
4Move to the next file.
5Stop
6Pause
7Move to the previous file.
8Progress bar 
						

							Using programs on a computer
Playback/Editing  106
Updating the firmware
From the Samsung i-Launcher screen, click Firmware Upgrade.
Downloading the front LCD animation
From the Samsung i-Launcher screen, click Front LCD Animation Download.
Downloading the PC Auto Backup program
From the Samsung i-Launcher screen, click  PC Auto Backup. For information about 
installing the PC Auto Backup program, refer to page 117. 
						

							Connecting to a WLAN and configuring  
network settings
   …………………………………  108
Connecting to a WLAN   …………………………  108
Using the login browser   ………………………  110
Network connection tips   ………………………  111
Entering text   ……………………………………  112
Sending photos or videos to a smart phone   … 113
Using a smart phone as a remote shutter  
release
   ……………………………………………  114
Saving files to a smart phone automatically   … 116
Using Auto Backup to send photos or videos  … 117
Installing the program for Auto Backup on  
your PC
   …………………………………………  117
Sending photos or videos to a PC  ………………  117
Sending photos or videos via email  ……………  119
Changing email settings   ………………………  119
Sending photos or videos via email   ……………  120
Using photo or video sharing websites   ………  122
Accessing a website   ……………………………  122
Uploading photos or videos   ……………………  122
Using AllShare Play to send files   ………………  124
Uploading photos to online storage  ……………  124
Viewing photos or videos on devices that  
support AllShare Play
   …………………………  125
Sending photos using Wi-Fi Direct   ……………  127
Wireless network
Learn to connect to wireless local area networks (WLANs) and use functions.  
						

							Wireless network  108
Connecting to a WLAN and configuring network settings
Learn to connect via an access point (AP) when you are in a range of a WLAN. You can also configure network settings. 
4 Select an AP.
Wi-Fi SettingRefresh
Samsung 1
Samsung 2
Samsung 3
Samsung 4Back Manual
• Select Refresh to refresh connectable APs.
• Select Add wireless network
 to add an AP manually.
Connecting to a WLAN
1 On the Home screen, scroll to .
2 Select , , , or .
3 Press [m], and then select Wi-Fi Setting.
• In some modes, follow the on-screen instructions until the Wi-Fi Setting 
screen appears.
• The camera automatically searches for available AP devices. 
						

							Connecting to a WLAN and configuring network settings
Wireless network  109
Icon Description
Ad hoc AP
Secured AP
WPS AP
Signal strength
Press [t] to open network setting options.
• When you select a secured AP, a pop-up window appears. Enter the required 
passwords to connect to the WLAN. For information about entering text, refer 
to "Entering text". (p.112)
• When a login page appears, refer to "Using the login browser". (p.110)
• When you select an unsecured AP, the camera will connect to the WLAN.
• If you select a WPS profile supported AP, select  “  WPS PIN connection, 
and then enter a PIN on the AP device. You can also connect to a WPS profile 
supported AP by selecting 
  “  WPS button connection on the camera, and 
then pushing the WPS button on the AP device.
Setting network options
1 In the Wi-Fi Setting screen, move to an AP, and then press [t].
2 Select each option, and then enter the required information.
Option Description
Network Password
Enter the network password.
IP SettingSet the IP address automatically or manually.