Samsung Cht 350 Instruction Manual
Have a look at the manual Samsung Cht 350 Instruction Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1705 Samsung manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
GB 21 Presetting the Stations Manually☛ You do not need to preset the stations manually if you have already set them automatically. 1 Press the SETUP button on the remote control. Result : The MAIN MENU is displayed. 2 Press the corresponding ,❷or ➛, ❿buttons to select the INSTALLATION option. 3 Press the ENTER button to select this option. Result : The INSTALLATION menu is displayed. 4 Press the corresponding or❷buttons, until the MANUAL SET UP option is selected. 5 Press the ENTER button to select a MANUAL SET UP option. Result : The TV STATION TABLE menu is displayed. 6 Press the or ❷buttons to select a programme number as required. 7 Press the ❿button to preset the station. Result : The MANUAL TUNING menu is displayed. 8 Press the ➛or ❿buttons to start scanning. Result : The frequency band is scanned and the first station found is displayed. 9 Press the ❷button, until the DECODER is selected. 10 Press the ❿button to activate or deactivate use of the decoder for the TV station, if necessary. 11 Press the or❷buttons until the NAME is selected. The station name is set automatically from the broadcast signal. 12 To change the programme’s name, press the ❿button. Result : The first letter of the name flashes. 13 To... Then...Select a character Press the or❷button until the in the name required character is displayed (letters, numbers or “-” character). Move to the next or Press the ❿or ➛buttons previous character respectively. 14 If you... Then...Wish to store the Press the or❷buttons until the MFT station displayed is selected. Press the ➛or❿buttons to adjust the picture, if necessary. Press ENTER to store the station Do not wish to Press the or ❷buttons until the CH store the station is selected. displayed Press the ➛or❿buttons to go on scanning the frequency band and display the next station Go back to the beginning of Step 14 15 Repeat this procedure from Step 6onwards, until all the required stations have been stored. 16 On completion, press the RETURN button three times to exit the menu. INSTALLATION AUTO SET UP MANUAL SET UP TV SYSTEM :G VCR OUTPUT CH :CH36RETURN ❷ ENTER TV STATION TABLE PR CH NAME DEC 1 2 3 4 5❷❿ SWAPPING:ENTER RETURN DELETE:CLEAR MANUAL TUNING PR : 1 CH : --- MFT : - DECODER : OFF NAME : ----❷ ➛ ❿ MEMORY:ENTER RETURNMAIN MENU INSTALLATION RETURN ❷ ➛❿ ENTER VCR GB 20Presetting the Stations Automatically ☛ You do not need to preset the stations if you have already set them automatically (see Plug & Auto Set Up on page 13). Your DVD-VCR contains a built-in tuner used to receive television broadcasts. You must preset the stations received through the tuner. This can be done: Automatically Manually (see page 21) You can store up to 80 stations. 1 Press the SETUP button on the remote control. Result : The MAIN MENU is displayed. 2 Press the corresponding ,❷or ➛, ❿buttons to select the INSTALLATION option. 3 Press the ENTER button to select this option. Result : The INSTALLATION menu is displayed. 4 Press the corresponding or ❷buttons, until the AUTO SET UP option is selected. And then press the ENTER button to select this option. Result : The country selection MENU is displayed. 5 Press the or❷buttons to select your country. ☛ The VCR searches for the stations according to a preset preference list corresponding to the country that you have selected. 6 Press ENTER button. Result : A message appears, indicating that any channels already preset on your VCR will be deleted. 7 Press ENTER to start the auto scanning. Result : The PLEASE WAIT indication flashes on the television screen. The first frequency band is scanned and the first station found is displayed and stored.The DVD-VCR then searches for the second station and so on.When the automatic scanning procedure has finished, the DVD-VCR switches automatically to programme 1. ➢ The number of stations automatically stored by the DVD- VCR depends on the number of stations that it has found. 8 If you wish to cancel the auto scanning before the end, press the RETURN button three times to exit the menu. ➢ Once the auto scanning procedure has finished, some stations may have been stored more than once; select the stations with the best reception and delete the ones no longer required (see page 22). AUTO SET UP PLEASE WAIT 2% I--------------------I RETURNYOUR DATA WILL BE LOST PRESSENTERTO CONTINUE RETURNTO EXIT INSTALLATION AUTO SET UP MANUAL SET UP TV SYSTEM :G VCR OUTPUT CH :CH36RETURN ❷ ENTER MAIN MENU INSTALLATION RETURN ❷ ➛❿ ENTER VCR 00096X DVD-CM350/AFR-GB2(~36) 6/26/03 3:55 PM Page 20
GB 23 GB 22 Changing the Preset Station TableYou can rearrange the Station Table and give different programme numbers to the stations listed according to your own preferences.1 Press the SETUP button on the remote control. 2 Press the corresponding ,❷or ➛, ❿buttons to select the INSTALLATION option. 3 Press the ENTER button to select this option. Result : The INSTALLATION menu is displayed. 4 Press the corresponding or❷buttons, until the MANUAL SET UP option is selected. 5 Press the ENTER button to select this option. Result : The TV STATION TABLE menu is displayed. 6 Press the corresponding or❷buttons, until the required preset TV programme is selected. Result : The selected station is displayed at the same time on the television screen. 7 To change the programme number assigned to a station press the ENTER button on the remote control (For example; To move a TV station in programme 1 to programme 3). 8 You can modify this station by repeating the same procedure from Step 6onwards. 9 On completion, press the RETUTN button three times to exit the menu. TV STATION TABLE PR CH NAME DEC 1 003 --- OFF 2 3 4 5❷❿ SWAPPING:ENTER RETURN DELETE:CLEARTV STATION TABLE PR CH NAME DEC 1 2 3 003 --- OFF 4 5❷❿ SWAPPING:ENTER RETURN DELETE:CLEARMAIN MENU INSTALLATION RETURN ❷ ➛❿ ENTER INSTALLATION AUTO SET UP MANUAL SET UP TV SYSTEM :G VCR OUTPUT CH :CH36RETURN ❷ ENTER VCR Clearing a Preset Station If you have stored a TV station: That you do not require At the wrong programme position you can cancel it.1 Press the SETUP button on the remote control. 2 Press the corresponding ,❷or ➛, ❿buttons to select the INSTALLATION option. 3 Press the ENTER button to select this option. Result : The INSTALLATION menu is displayed. 4 Press the corresponding or❷buttons, until the MANUAL SET UP option is selected. 5 Press the ENTER button to select this option. Result : The TV STATION TABLE menu is displayed. 6 Press the corresponding or❷buttons, until the required preset TV station is selected. ( PR) 7 Press the CLEAR button. 8 Repeat the same procedure from Step 6onwards until all the required stations have been cleared. 9 On completion, press the RETURN button three times to exit the menu. MAIN MENU INSTALLATION RETURN ❷ ➛❿ ENTER INSTALLATION AUTO SET UP MANUAL SET UP TV SYSTEM :G VCR OUTPUT CH :CH36RETURN ❷ ENTER TV STATION TABLE PR CH NAME DEC 1 003 --- OFF 2 3 4 5❷❿ SWAPPING:ENTER RETURN DELETE:CLEAR VCR 00096X DVD-CM350/AFR-GB2(~36) 6/26/03 3:55 PM Page 22
GB 25 GB 24 Selecting the Colour ModeNICAMNICAM programmes are divided into 3 types. NICAM Stereo, NICAM Mono and Bilingual (transmission in another language). NICAM programmes are always accompanied by a standard mono sound broadcast and you can select the desired sound. Please refer to page 37. 1 Press SETUP on the remote control. Result : The MAIN MENU is displayed. 2 Press the corresponding ,❷or ➛, ❿buttons to select the USER SET option. 3 Press the ENTER button to select this option. Result : The USER SET menu is displayed. 4 Press the corresponding or❷buttons, until the NICAM option is selected. 5 To... Press ➛or❿, until... Mono mode OFF is displayed. OFF: Only set at this position to record the standard mono sound during a NICAM broadcast if the stereo sound is distorted due to inferior reception conditions. NICAM mode ONis displayed. ON: Normally set at this position. 6 On completion, press RETURN twice to exit the menu. Before recording or playing back a cassette, you can select the required system standard. Otherwise, the system automatically selects the reception standard when you select AUTO.➢ When playing back a cassette, the standard is automatically selected by the DVD-VCR. When you playback an NTSC-recorded tape on this DVD- VCR make a setting on the colour system according to your TV. If your TV is a PAL system only TV, set NTPB. If your TV is Multi System TV (NTSC 4.43 compatible), set NT4.43 and you can record NT4.43.1 Press SETUP on the remote control. Result : The MAIN MENU is displayed. 2 Press the corresponding ,❷or ➛, ❿buttons to select the USER SET option. 3 Press the ENTER button to select this option. Result : The USER SET menu is displayed. 4 Press the corresponding or❷buttons, until the COLOUR SYSTEM option is selected. 5 Press the ❿button to select AUTO ➝ PAL ➝ SECAM ➝ MESECAM ➝ B/W . AUTOWhen playing back a cassette, the system standard is automatically selected by the DVD-VCR. B/WBlack and White 6 On completion, press RETURN twice to exit the menu. MAIN MENU USER SET RETURN ❷ ➛❿ ENTER USER SET COLOUR SYSTEM :AUTO NICAM :ON IPC :ON AUTO POWER OFF :OFF SHOWVIEW EXTEND :OFF AUX AUDIO :RCARETURN ❷ ➛❿MAIN MENU USER SET RETURN ❷ ➛❿ ENTER AUTO PAL SECAMMESECAMB/W USER SET COLOUR SYSTEM :AUTO NICAM :ON IPC :ON AUTO POWER OFF :OFF SHOWVIEW EXTEND :OFF AUX AUDIO :RCARETURN ❷ ➛❿ ON OFF VCRVCR Selecting the RF OUT Sound Mode (B/G-D/K)Setting the DVD-VCR Output Channel Your DVD-VCR output channel may need to be changed if the pictures suffer from interference or if your TV cannot find the pictures. Also, you can change the DVD-VCR output channel to adjust the frequency in which information is displayed on the screen. 1 Press SETUP on the remote control. Result : The MAIN MENU is displayed. 2 Press the corresponding ,❷or ➛, ❿buttons to select the INSTALLATION option. 3 Press the ENTER button to select this option. Result : The INSTALLATION menu is displayed. 4 Press the or❷buttons, until the VCR OUTPUT CH option is selected. 5 Select the required output channel (CH21~CH69) by pressing the➛or ❿buttons. 6 On completion, press RETURN to exit the menu. Then tune your television again (see page 14). You can choose the sound mode (B/G or D/K) according to the TV set connected to your VCR.1 Press SETUP on the remote control. Result : The MAIN MENU is displayed. 2 Press the corresponding ,❷or ➛, ❿buttons to select the INSTALLATION option. 3 Press the ENTER button to select this option. Result : The INSTALLATION menu is displayed. 4 Press the or❷buttons, until the TV SYSTEM option is selected. 5 Press the ➛or ❿button to select G or K. 6 On completion, press RETURN to exit the menu. INSTALLATION AUTO SET UP MANUAL SET UP TV SYSTEM :G VCR OUTPUT CH :CH36RETURN ➛❿❷MAIN MENU CH21 CH36 CH69 INSTALLATION RETURN ❷ ➛❿ ENTER MAIN MENU INSTALLATION RETURN ❷ ➛❿ ENTER INSTALLATION AUTO SET UP MANUAL SET UP TV SYSTEM :G VCR OUTPUT CH :CH36RETURN ❷ ➛❿ G K VCRVCR 00096X DVD-CM350/AFR-GB2(~36) 6/26/03 3:55 PM Page 24
GB 27 GB 26 ShowView EXTENDTo prevent delays or over-runs the VCR has a function called ShowView EXTEND allowing you to extend the recording time by up to 60 minutes. ➢ Only use if PDC is not available or set to OFF. 1 Press the SETUP button on the remote control. 2 Press the corresponding ,❷or ➛, ❿buttons to select the USER SET option. 3 Press the ENTER button to select this option. Result : The USER SET menu is displayed. 4 Press the corresponding or❷buttons, until the SHOWVIEW EXTEND option is selected. 5 Press ➛or❿buttons to set the ShowView EXTEND time by increments of 10 minutes. 6 To turn off, press ➛or❿buttons repeatedly until OFF shows. USER SET COLOUR SYSTEM :AUTO NICAM :ON IPC :ON AUTO POWER OFF :OFF SHOWVIEW EXTEND :OFF AUX AUDIO :RCARETURN ➛❿❷ OFF 10 60 MAIN MENU USER SET RETURN ❷ ➛❿ ENTER VCR Intelligent Picture ControlAuto Power Off The Intelligent Picture Control Feature allows you to adjust the sharpness of the image automatically, according to your own preferences. 1 During playback, press the SETUP button on the remote control. Result : The MAIN MENU is displayed. 2 Press the corresponding , ❷or ➛, ❿buttons to select the USER SET option. 3 Press the ENTER button to select this option. Result : The USER SET menu is displayed. 4 Press the corresponding or ❷buttons, until the IPC option is selected. 5 Press the ❿button to select the IPC (intelligent picture control) option. ➢ When intelligent picture control mode is ON, the sharpness of the image is adjusted automatically. 6 To adjust the sharpness manually, press the ❷button to turn the IPC mode OFF . 7 Press the ➛or ❿buttons until the picture is displayed according to your preferences. ➢ If you do not press a button within ten seconds, thePICTURE menu disappears automatically. 8 On completion, press the RETURN button again. The Auto Power Off feature automatically turns off your DVD-VCR if no signal is received and you do not press any button for the selected time. 1 Press SETUP on the remote control. Result : The MAIN MENU is displayed. 2 Press the corresponding ,❷or ➛, ❿buttons to select the USER SET option. 3 Press the ENTER button to select this option. Result : The USER SET menu is displayed. 4 Press the corresponding or❷buttons, until the AUTO POWER OFF option is selected. 5 Press the ❿button, until you select the time of Auto Power off interval. OFF 2HOUR 3HOUR 6 On completion, press RETURN twice to exit the menu. USER SET COLOUR SYSTEM :AUTO NICAM :ON IPC :ON AUTO POWER OFF :OFF SHOWVIEW EXTEND :OFF AUX AUDIO :RCARETURN ❷ ➛❿ ON OFF MAIN MENU USER SET RETURN ❷ ➛❿ ENTER USER SET COLOUR SYSTEM :AUTO NICAM :ON IPC :ON AUTO POWER OFF :OFF SHOWVIEW EXTEND :OFF AUX AUDIO :RCARETURN ❷ ➛❿ OFF 2HOUR 3HOUR MAIN MENU USER SET RETURN ❷ ➛❿ ENTER VCRVCR 00096X DVD-CM350/AFR-GB2(~36) 6/26/03 3:55 PM Page 26
GB 29 GB 28 OSDSelecting the Recording SpeedYour DVD-VCR displays most information both on the DVD-VCR and the television. You can choose to display or hide this information on the television screen (except for the Index, MAIN MENU and Timer functions, which cannot be hidden).1 Press SETUP on the remote control. Result : The MAIN MENU is displayed. 2 Press the corresponding ,❷or ➛, ❿buttons to select the VCR FUNCTION SETUP option. 3 Press the ENTER button to select this option. Result : The VCR FUNCTION SETUP menu is displayed. 4 Press the corresponding or❷buttons, until the OSD option is selected. 5 To... Press ➛or❿, until... Display on-screen information ONis displayed. Hide on-screen information OFF is displayed. 6 On completion, press RETURN twice to exit the menu. Type Recording Time (in SP) E-180 180 mins. or 3 hours E-240 240 mins. or 4 hours E-260 260 mins. or 4 hours and 20 mins. E-300 300 mins. or 5 hours MAIN MENU VCR FUNCTION SETUP RETURN ❷ ➛❿ ENTER VCR FUNCTION SETUP Tape Select E180 Repeat Play Off OSD ➛❿On RETURN ❷ On Off You can record a cassette at two different speeds: SP (Standard Play) LP (Long Play) In Long Play modes: Each cassette lasts twice as long The recording is of a slightly lower qualityTo record a cassette... Press the SPEED button on the remote control, until... In standard play mode SPis displayed. In long play modeLPis displayed. VCRVCR If you wish to use the tape counter to display the time remaining on a cassette, you must indicate the type of cassette inserted.1 Press SETUP on the remote control. Result : The MAIN MENU is displayed. 2 Press the corresponding ,❷or ➛, ❿buttons to select the VCR FUNCTION SETUP option. 3 Press the ENTER button to select this option. 4 Press the corresponding or❷buttons, until the TAPE SELECT option is selected. 5 Press the ➛or ❿buttons as many times as required, until the correct cassette length is displayed. E180 E240 E300 E260 6 Press RETURN twice to exit the menu. Selecting the Cassette Type You can set repeat play to repeat the tape continuously from beginning to end. 1 Press SETUP on the remote control. Result : The MAIN MENU is displayed. 2 Press the corresponding ,❷or ➛, ❿buttons to select the VCR FUNCTION SETUP option. 3 Press the ENTER button to select this option. Result : The VCR FUNCTION SETUP menu is displayed. 4 Press the corresponding or❷buttons, until the Repeat Play option is selected. 5 To... Press ➛or❿, until... Repeat play ONis displayed. Do not wish to repeat play OFF is displayed. 6 On completion, press RETURN twice to exit the menu. Auto Repeat PlayMAIN MENU VCR FUNCTION SETUP RETURN ❷ ➛❿ ENTER VCR FUNCTION SETUP Tape Select ➛ ➛❿ ❿E180 Repeat Play Off OSD On RETURN ❷ E180 E240 E260 E300 MAIN MENU VCR FUNCTION SETUP RETURN ❷ ➛❿ ENTER VCR FUNCTION SETUP Tape Select E180 Repeat Play ➛❿Off OSD On RETURN ❷ Off On VCRVCR 00096X DVD-CM350/AFR-GB2(~36) 6/26/03 3:55 PM Page 28
GB 31 GB 30 Recording a Programme with Automatic StopThis function enables you to record up to nine hours (LP) of programmes. Your DVD-VCR stops automatically after the requested length of time.1 Switch on the television. 2 To monitor the programme being recorded, select the television channel reserved for use with your DVD-VCR (or the AV input if used). 3 Insert the cassette on which the programme is to be recorded, with the window visible and the safety tab intact or the opening covered with adhesive tape. Result : The DVD-VCR is switched on automatically. 4 Select: The station to be recorded using the PROG ( or ❷)buttons or The AV1, AV2 or AUX source using the INPUT button for a satellite tuner or external video source Result: The channel number is displayed and the programme can be seen on the television. 5 Select the recording speed by pressing the SPEED button as many times as required (see page 29). 6 Hold the REC button ( ) down for a while to start recording. Result : The record indicator appears on the television screen and DVD-VCR display. An index is recorded on the tape (see page 39). 7 Press the REC button ( ) several times to increase the recording time in: 30-minute intervals up to four hours 1-hour intervals up to nine hours (LP) Result: The length is displayed on the television displays. The selected programme is recorded for the length of time requested. At the end of that time, the DVD-VCR stops recording automatically. 8 If you wish to cancel the recording before the end, press STANDBY/ON. ☛ If the end of the tape is reached while recording: The recording stops 344VCR LENGTH 2:30 SET LENGTH : PRESS REC 6 5 Protecting a Recorded CassetteRecording a Programme Immediately Video cassettes have a safety tab to prevent accidental erasure. When this tab has been removed, you cannot record on the tape. 1 If you wish to protect a cassette, break off the tab using a small screwdriver. 2 To re-record over a protected cassette (safety tab broken), cover the hole with adhesive tape. 744 1 Before recording a programme, you must have preset the corres- ponding station (unless you are recording via an external video source). If you have not done so, refer to pages 19 and 20.1 Switch on the television. 2 To monitor the programme being recorded, select the television channel reserved for use with your DVD-VCR (or the AV input if used). 3 Insert the cassette on which the programme is to be recorded, with the window visible and the safety tab intact or the opening covered with adhesive tape. Result : The DVD-VCR is switched on automatically. 4 Select: The station to be recorded using the PROG ( or ❷)buttons or The AV1, AV2 or AUX source using the INPUT button for a satellite tuner or external video source Result: The station number is displayed and the programme can be seen on the television. 5 Select the recording speed by pressing the SPEED button as many times as required (see page 29). 6 Hold REC ( ) down for a while to start recording. Result : The record indicator appears on the television and DVD- VCR display. An index is recorded on the tape (see page 39). 7 To stop recording, press once. ➢ If your DVD-VCR ejects the cassette when you start recording, check to make sure that the cassette’s safety tab is intact or that the opening (created by a broken safety tab) is covered with adhesive tape. If you reach the end of the tape while recording, the cassette rewinds automatically. VCRVCR 6 5 00096X DVD-CM350/AFR-GB2(~36) 6/26/03 3:55 PM Page 30
GB 33 GB 32 Modifying ShowView ProgrammingIf you wish to correct the programme displayed or modify certain elements, such as the recording speed, you can do so before you press SETUP a second time to confirm.If you wish to... Then...Select an input source other Press the ➛or ❿buttons, until the PRselection flashes. than the tuner (AV1, AV2 ) Press the INPUT button one or more times to change the input source selection. Result : The programme number is replaced by: •The AV1, AV2 source using the INPUT button for a satellite tuner or external video source ➢ The input source must be selected before changing any other value. Record a programme every day Press the ➛or ❿buttons, until the DAY selection flashes. (Monday to Sunday) at the same time Press the or❷buttons, until the DLY (Daily) value is displayed. Record a programme every week Press the ➛or ❿buttons, until the DAY selection flashes. on the same day and at the same time Press the or❷buttons, until the W-(Week) value is displayed, followed by the required day. Example :W-SA (Weekly Saturday) Extend the recording time Press the ➛or ❿buttons, until the STOP selection flashes. Press the or❷buttons to increase or decrease the stop time. Select the recording speed Press the ➛or ❿buttons, until the recording speed selection flashes. Press the or❷buttons until the correct indication is displayed: •AUTO (Auto Tape Speed Select) : see page 35 •SP (Standard Play) •LP (Long Play) Select the PDC recording Press the ➛or ❿buttons, until the V/P selection flashes. Press the or❷buttons until the “ON” indication is displayed. ☛ Do not select PDC unless you are sure the programme you wish to record is broadcast with PDC. If you do set PDC ON (by selecting “ON” in the right - hand column on the screen), then you must set up the start-time EXACTLY according to the published TV schedule. Otherwise the timer recording won’t take place. VCR Using the ShowView Feature Before presetting your DVD-VCR: Switch on both the television and your DVD-VCR Check that the date and time are correct Insert the cassette on which the programme is to be recorded (safety tab intact) Up to six programmes can be preset.1 To enter a ShowView, press the TIMER button. Press the ❷and ENTER buttons to select SHOWVIEW . Result : A message is displayed to allow you to enter the ShowView code. ☛ If all six programmes have been set, the message TIMER IS FULL is displayed. Refer to page 35 if you wish to cancel a preset recording. 2 Press the numeric buttons to enter the code opposite the programme that you wish to record in your television magazine.➢ If you wish to correct the ShowView code that you are entering: Press the ➛button until the digit to be corrected is cleared Enter the correct digit 3 Press the ENTER button. Result : The information concerning the programme is displayed. ☛ When using the ShowView function for the first time with stored stations, the programme number flashes. This one time, you must enter the station number manually by pressing the or❷buttons. Refer to the following page if: The programme number or times flash You wish to modify the programme 4 If the programme and times are correct, press the RETURN button. 5 Press the STANDBY/ON button to activate the timer. 6 Refer to page 35 if you wish to: Check that your DVD-VCR has been programmed correctly Cancel a preset recording ☛ The numbers next to each TV programme listing are SHOWVIEW code numbers, which allow you to programme your videorecorder instantly with the remote control. Tap in the ShowView code for the programme you wish to record. ™ ShowView is a trademark of Gemstar Development Corporation. The ShowView system is manufactured under licence from Gemstar Development Corporation. 5 SHOWVIEW CODE --------- CODE:0-9 CORRECT: ➛ RETURN ENTER 1 TIMER METHOD STANDARD SHOWVIEW RETURN ❷ ENTER VCR 1/JAN TUE 12:09 PR DAY START →STOP -- ---- --:--→--:---- -- ---- --:--→--:---- -- ---- --:--→--:---- -- ---- --:--→--:---- -- ---- --:--→--:---- -- ---- --:--→--:---- ❷ SET: ❿ RETURN DELETE:CLEAR 00096X DVD-CM350/AFR-GB2(~36) 6/26/03 3:55 PM Page 32
GB 35 GB 34 Checking a Preset RecordingCancelling a Preset ProgrammeYou can check your preset recordings: When you have finished presetting the DVD-VCR If you have forgotten which programmes will be recorded1 Press TIMER on the remote control. Result : The timer selection is displayed. 2 Press the ENTER button to select STANDARD option. Result : The TIMER PROGRAMMING menu is displayed. 3 Press the or❷buttons to select the required programme. 4 Press the ➛or ❿buttons to select and change any values as required. For more details, refer to the previous page. 5 On completion, press RETURN twice. 4 You can cancel any programmes that are: Incorrect No longer required1 Press TIMER on the remote control. Result : The timer selection is displayed. 2 Press the ENTER button to select STANDARD option. Result : The TIMER PROGRAMMING menu is displayed. 3 Select the programme to be cancelled by pressing the or❷ buttons. 4 Press the CLEAR button to cancel the selected programme. Result : All the recording information is deleted and the broad- cast will not be recorded. 5 On completion, press RETURN twice. VCRVCR Using the Timer Programming Feature The Timer Programming feature allows you to preset the DVD-VCR to record a programme up to one month before that programme is to be broadcast. Up to six programmes can be preset. ☛ Before presetting a recording, check that the date and time are correct. 1 Insert the cassette and press TIMER on the remote control. Result : The timer selection is displayed. 2 Press the ENTER button to select STANDARD option. Result : The TIMER PROGRAMMING menu is displayed. 3 Press ❿to select the input source. 4 Select the required station by pressing the ,❷buttons or INPUT to select the AV1, AV2 input sources. 5 Press ❿to select the recording day. 6 Select the required day by pressing the or❷buttons. 7 Press ❿to select the recording start time. 8 Select the required hour value by pressing the or❷buttons. 9 Press ❿to select the minutes. 10 Select the required minute value by pressing the or❷buttons. 11 Press ❿to select the recording end time. 12 Select the required recording end time by pressing the or❷ buttons, following the same procedure as when selecting the recording start time. 13 Press ❿to select the recording speed. 14 Press the or❷buttons to select the SP (Standard Play), LP (Long Play), AUTO (Auto Tape Speed Select) recording speeds. 15 Press the or❷buttons to toggle between the VPS or PDC mode (marked ON) and the non-VPS/PDC mode (marked -). 16 When you have finished, press the RETURN button. 17 Press the STANDBY/ON button to activate the timer. Result : Before starting recording, the DVD-VCR compares the timer duration with the remaining time on the cassette. ➢ Auto Tape Speed Select. The DVD-VCR’s “Auto Tape Speed Select” function compares the duration of the timer recording to the actual recording time remaining on the tape loaded. If there is insufficient tape to complete a timer recording in AUTO mode, the DVD-VCR automatically switches to LP mode to record the whole programme. TIMER METHOD STANDARD SHOWVIEW RETURN ❷ ENTER VCR 17 1/JAN TUE 12:09 PR DAY START →STOP 1 SA 9 12:00→12:50SP -- ---- --:--→--:---- -- ---- --:--→--:---- -- ---- --:--→--:---- -- ---- --:--→--:---- -- ---- --:--→--:---- ❷➛❿ SET: ❿ RETURN DELETE:CLEAR 1/JAN TUE 12:09 PR DAY START →STOP 1 SA 9 12:00→12:50SP -- ---- --:--→--:---- -- ---- --:--→--:---- -- ---- --:--→--:---- -- ---- --:--→--:---- -- ---- --:--→--:---- ❷➛❿RETURN DELETE:CLEAR 1/JAN TUE 12:09 PR DAY START →STOP 1 SA 9 12:00→12:50SP -- ---- --:--→--:---- -- ---- --:--→--:---- -- ---- --:--→--:---- -- ---- --:--→--:---- -- ---- --:--→--:---- ❷➛❿RETURN DELETE:CLEAR 00096X DVD-CM350/AFR-GB2(~36) 6/26/03 3:55 PM Page 34
GB 36 Playing a CassetteAdjusting Picture Alignment Manually This function allows you to play back any pre-recorded cassette.1 Switch on both the television and your DVD-VCR. 2 Insert the video cassette to be played. If the safety tab on the cassette is intact, press ❿ll. Otherwise, the cassette is played automatically. ➢ When a cassette is loaded, the tape position is optimized automatically to reduce disturbance (Digital Auto Tracking). When playing a cassette, if the end of the tape is reached, the cassette is rewound automatically. NTSC tapes can be played back but cannot be recorded with this DVD-VCR. 3 To... Then press...Stop the playback (STOP). Eject the cassette (EJECT). 3 23 The Picture Adjustment feature allows you to adjust the alignment manually to obtain the best possible picture.When noise bars or streaks appear during playback, adjust alignment manually by pressing the TRK ( or❷) buttons until the picture is clear and stable. Result : The tracking bar appears.The image is adjusted.The tracking bar disappears when you release the button. VCRVCR Adjusting Picture Alignment Automatically The Picture Alignment feature enables you to optimize the tape position automatically to obtain the best possible picture.When noise bars or streaks appear during playback, adjust picture alignment by pressing the ATR button. Result : The tracking bar appears.The picture is automatically adjusted.The tracking bar disappears when digital auto tracking has been completed. VCR 00096X DVD-CM350/AFR-GB2(~36) 6/26/03 3:55 PM Page 36
37 GB Selecting the Audio Output ModePlaying a Cassette in Slow Motion You can select the mode in which the sound is reproduced on the loudspeakers and AV outputs. The following options are available In tape playback mode.Option DescriptionL Used to listen to the sound on the left Hi-Fi channel.R Used to listen to the sound on the right Hi-Fi channel.MIX Used to listen to the mixed sound of the Hi-Fi and normal channels.MONO Used to listen to the sound on the normal mono channel.L R Used to listen to Hi-Fi stereo sound on the left and right channels. ➢ When playing back tapes recorded in Hi-Fi, the sound switches to Hi-Fi after five seconds of Mono. To select the sound mode, simply press the AUDIO button on the remote control until the required option is displayed.You can play a cassette in slow motion. ➢ No sound is heard when playing back a cassette in slow motion. 1 Press: ❿llto start playing the cassette ❿llbutton one more time to make STILL mode. ❿❿to start SLOW mode. ❿❿or ➛➛button as many times as required to decrease or increase the speed respectively To return to the normal speed, press the ❿ll button twice. 2 When playing back in slow motion, picture interference may occur. Press the TRK ( or❷) buttons to minimize this effect. ☛ When you have been using the Slow Motion function for more than about five minutes, the DVD-VCR will automatically play to protect the:CassetteVideo heads L R MIX L R MONO 22 1 1 VCRVCR 00096X DVD-CM350/AFR-GB3(~57) 6/26/03 3:56 PM Page 37