Samsung Cht 500 Instruction Manual

GB
11
Connecting DVD-VCR to the TV using the Coaxial Cable
Connecting DVD-VCR to the TV using the SCART Cable
To receive television programmes a signal must be received from
one of the following sources:
An outdoor aerial
An indoor aerial
A cable television network
A satellite receiver
☛Make sure that both the television and the DVD-VCR
are switched offbefore connecting the cables.
1Remove the aerial or network input cable from the television.
2Connect this cable to the 75Ωcoaxial socket marked  on...

GB
12
Connecting DVD-VCR to a Satellite Receiver or Other Equipment
1. AV2 IN: By means of 21-pin Scart Cable
Plug the SCART Cable with satellite receiver or other equipment into the AV2 (DEC./EXT.) socket on the rear of
the DVD-VCR. 
After making this connection, select the source by pressing the INPUT SEL. button for the AV2 input sources. 
2. By means of RF Coaxial Cable
After making this connection, you must preset the station received through the satellite tuner. 
RF output channel of the satellite...

GB
13
Plug & Auto Set up
Your DVD-VCR will automatically set itself up when it is plugged
into the mains for the first time. TV stations will be stored in
memory. The process takes a few minutes. Your DVD-VCR will
then be ready for use.
1Connect the coaxial cable as indicated on page 11. 
(Connecting Your DVD-VCR to the TV Using the Coaxial Cable)
2Plug the DVD-VCR into the mains.
Result: The Language Set menu is displayed.
3Select the required language by pressing the or❷buttons.
4Press OK to store the...

GB
14
Tuning Your Television for the DVD-VCR
You must tune your television for the DVD-VCR only if you are
not
using a Scart cable
➢To view pictures from your DVD-VCR when a Scart
cable is used, the television must be set to the
audio/video mode (AV).
1Switch on the television.
2Switch on the DVD-VCR by pressing STANDBY/ON on the front
of the DVD-VCR or STANDBY/ON on the remote control.
3Select a programme position on the television to be reserved for
use with your DVD-VCR.
4Insert the video cassette in...

GB
15
Deck Control Keys
The DVD-VCR uses one set of controls to operate bothdecks.
The following keys are helpful in successfully controlling each
deck. 
1STANDBY/ON Button
Press the STANDBY/ON button on the remote control or front
panel to turn on the DVD-VCR. 
2DVD Button
Press the DVD button on the remote control when you want to
control the DVD deck. 
The DVD indicator will light on the Front Panel Display to 
show that the DVD deck is selected. 
3VCR Button
Press the VCR button on remote control...

GB
16
Inserting Batteries in the Remote Control
You must insert or replace the batteries in the remote control
when you:
Purchase the DVD-VCR
Find that the remote control is no longer working
correctly
1Push the tab in the direction of the arrow to release the battery
compartment cover on the rear of the remote control.
2Insert two AAA, RO3 or equivalent batteries, taking care to
respect the polarities:
+ on the battery with + on the remote control– on the battery with – on the remote control...

GB
17
Copying from DVD to VCR
The DVD-VCR allows you to copy the contents of a DVD to a
VHS tape with a press of the COPY button.  
If the DVD you are attempting to copy is copy 
protected, you will not be able to copy the disc. It is not 
permitted to copy Macrovision® encoded DVDs.  
1INSERT DISC
Insert the disc you wish to copy in the DVD deck and close the
drawer.     
2Insert VHS Tape
Insert a blank VHS videotape into the VCR deck.   
3Copy the DVD to VHS Tape
Press the COPY button on the DVD-VCR...

GB
18
Setting the Menu Language
1 Open “MENU”
After pressing the MENU, press the OK or ❿.
2 Select “Language”
Use the or❷buttons to highlight 
“Language,” then press the OK or 
❿.
3 Set menu Language
Place the selection arrow next to your desired Language, then
press the OK button.
4On completion, press RETURN twice to exit the menu.
Language                    :  English
User Set                       
Auto Power Off           :  Off    
Screen Messages       :  On    
Install
Français
Deutsch
Español...

GB
19
Presetting the Stations Automatically
☛You do not need to preset the stations if you have already 
set them automatically (see Plug & Auto Set Up on page 13).
Your DVD-VCR contains a built-in tuner used to receive television
broadcasts. 
You must preset the stations received through the tuner. 
This can be done:
Plug & Auto Set up (see page 13)
Automatically
Manually (see page 20)
You can store up to 80 stations.
1After pressing the MENU, press the OK or ❿.
Result: The Setup menu is displayed....

GB
20
Presetting the Stations ManuallyVCR
Language                    :  English
User Set                       
Auto Power Off           :  Off    
Screen Messages       :  On    
Install
Auto SetupManual Setup
Install
TV System                    : G
VCR Output CH            : CH 36
MANUAL TUNING
     MEMORY  :  OK
RETURN
PR                                    :                 
CH                                    :  - - -                    
MFT                                  :   -
DECODER...