Samsung CLP 300N User Manual

Solving Problems
6.7
Back of 
printouts are 
dirty• Check for leaking toner. Clean the inside of the printer. See “Cleaning the Inside of the Printer” on 
page 5.7.
Solid Color or 
Black pages• The toner cartridge may not be installed properly. Remove the toner cartridge and reinsert.
• The toner cartridge may be defective and need  replacing. Install a new toner cartridge.
• The printer may require repair. Contact a service 
representative.
Loose toner• Clean the inside of the printer. 
• Check the...

Solving Problems
6.8
Troubleshooting Error Messages
When the printer experiences an error, the control panel will 
indicate an error message with the indicator lights and the 
Smart Panel program window will display to show the printer’s 
status or errors. Find the light pattern below that matches the 
printer light pattern and follow the solutions to clear the error.
LED status legend
LED patternPossible Problem and Solution
When the LED is blinking, the corresponding 
toner cartridge is low. Order a...

Solving Problems
6.9
Common Macintosh Problems
ProblemPossible Cause and Solution
The printer does not 
print PDF file correctly. 
Some parts of graphics, 
text, or illustrations are 
missing.Incompatibility between the PDF file and the 
Acrobat products:
Printing the PDF file as an image may solve this 
problem. Turn on 
Print As Image from the 
Acrobat printing options.
NOTE:It will take longer to print when you print a 
PDF file as an image.
The document has 
printed, but the print 
job has not...

Solving Problems
6.10
I am using BSD lpr 
(Slackware, Debian, 
older distributions) 
and some options 
chosen in LLPR don’t 
seem to take effect.Legacy BSD lpr systems have a hard limitation on 
the length of the option string that can be passed to 
the printing system. As such, if you selected a 
number of different options, you may have 
exceeded the length of the options and some of 
your choices won’t be passed to the programs 
responsible for implementing them. Try to select 
fewer options that...

Using Your Printer on a Network
7.1
7Using Your Printer on a 
Network 
If you work in a networked environment, the printer can be 
shared by other users on the network.
This chapter includes:
• About Sharing the Printer on a Network
• Setting Up a Network-Connected Printer(CLP-300N only)
•Using SetIP program
NOTE: If you are a CLP-300N user, you can only connect your 
printer to a network locally,  for use via a single computer.
About Sharing the Printer on a 
Network
If you work in a networked envi...

Using Your Printer on a Network
7.2
7Select the name of your printer and click  . 
NOTE: If you cannot find your printer name click   to 
refresh the list.
8Enter the network cards MAC address, IP address, subnet 
mask, default gateway, and then click Apply.
NOTE: If you do not know the network cards MAC address, print the machines network information report.    
9Click OK to confirm the settings.
10Click Exit to close the SetIP program.
Downloaded From ManualsPrinter.com Manuals 

Specifications
8.1
8 Specifications
This chapter includes:
• Printer Specifications
• Paper Specifications
Printer Specifications
ItemSpecifications and Description
Print speed*Black and white: Up to 16 PPM in A4 (17 PPM in Letter)
Color: Up to 4 PPM in A4(Letter)
Resolution Up to 2400 x 600 dpi effective output
First print out time From ready Black and white: Less than 14 seconds
Color: Less than 26 seconds
From coldboot
Black and white: Less than 45 seconds
Color: Less than 57 seconds
Warm-up time Less...

Specifications
8.2
Supported Sizes of Paper
NOTE: You may experience jams when using print materials 
with a length of less than 140 mm (5.5 in). For optimum 
performance, ensure that you are storing and handling the 
paper correctly. Please refer to “Printer and Paper Storage 
Environment” on page 8.3.
Tray*(mm/in)Paper trayWeightCapacity**
Plain paper
Letter (216 x 279/8.5 x 11)
A4 (210 x 297/8.27 x 11.69)
A5 (148 x 210/5.83 x 8.27)
Executive (184 x 267/7.25 x 10.5)
Legal (216 x 356/8.5 x 14)
JIS B5...

Specifications
8.3
Paper Specifications
Paper Output Capacity
Paper Input Capacity
CategorySpecifications
Acid Content 5.5 ~ 8.0 pH
Caliper 0.094 ~ 0.18 mm (3.0 ~ 7.0 mils)
Curl in Ream Flat within 5 mm (0.02 in)
Cut Edge Conditions Cut with sharp blades with no visible fray.
Fusing Compatibility Must not scorch, melt, offset, or  release hazardous emissions when 
heated to 180 °C (356 °F) for 0.1 
second.
Grain Long Grain
Moisture Content 4 % ~ 6 % by weight
Smoothness 100 ~ 250 Sheffield
Output...

Specifications
8.4
• Condition: Envelopes should not be wrinkled, nicked, or otherwise damaged.
• Temperature: You should use envelopes that are compatible  with the heat and pressure of the printer.
• Size: You should only use envelopes within the following size  ranges.
NOTE: You may experience some paper jams when using any 
media with a length less than 127 mm
(5 in). This may be 
caused by paper that has been affected by environmental 
conditions. For optimum performance, make sure you are 
storing...