Samsung CLP 350N User Manual

8.1   
8 Ordering supplies and 
accessories
This chapter provides information on purchasing cartridges and 
accessories available for your machine.
This chapter includes:
• Supplies
• Accessories
• How to purchase
Supplies
When the toner runs out, you can order the following type of toner 
cartridge for your machine:
Caution
When you purchase a new toner  cartridge, you must purchase it 
in the same country you have purchased your machine.
Otherwise, the toner cartridge w ill be incompatable with your...

9.1   
9 Installing accessories
Your machine is a full-featured model that has been optimized to meet 
most of your printing needs. Recognizing that each user may have 
different requirements, however, Samsung makes several accessories 
available to enhance your machine’s capabilities.
This chapter includes:
• Precautions to take when installing accessories
• Installing a memory module
Precautions to take when installing accessories
• Disconnect the power cord
Never remove the control board cover while...

9.2   
5Press the memory module into the slot with care until you hear a 
click. 
Caution 
Do not press the memory module strongly or the module 
may be damaged. If the module does not seem to fit into 
the slot properly, carefully try the previous procedure again.
6Replace the control board cover.
7Reconnect the power cord and printer cable, and turn the machine 
on.
Note
To release the memory module, pull the two tabs on the 
sides of the slot outwards, then the module springs out. 
Activating the...

10.1   
10 Specifications
Note
The numbers herein is subject to change according to its install 
environment.
ItemSpecifications and Description
Printing speed
aBlack and white: Up to 19 ppmb  in A4 (19 
ppm in Letter)
Color: Up to 5 ppm in A4(Letter)
Printing resolution
Max. 2,400 x 600 dpi effective output
Warm-up time
Less than 40 seconds (Coldboot)
First print out time
From ready
Black and white: Less than 14 seconds
Color: Less than 24 seconds
From coldboot
Black and white: Less than 50 seconds...

11.1   
11 Glossary
BOOTP
It stands for Bootstrap Protocol, a network protocol used by a network 
client to obtain its IP address automatically. This is usually done in the 
bootstrap process of computers or operating systems running on them. 
The BOOTP servers assign the IP address from a pool of addresses to 
each client. 
Control Panel
A control panel is a flat area where control or monitoring instruments are 
displayed. They are typically found in top or front of the machine. 
Coverage
This is the...

11.2   
ISO
The International Organization for Standardization (ISO) is an 
international standard-setting body composed of representatives from 
national standards bodies. It produces world-wide industrial and 
commercial standards.
LED
A light-emitting diode (LED) is a semiconductor device that indicates the 
status of a machine. 
Print Media
Media such as papers, envelopes, labels, and transparencies which can 
be used on a printer, a scanner, a fax or, a copier. 
OPC Drum
A mechanism that makes a...

1
C
card stock, print 4.9
cleaning
inside
 6.1
outside
 6.1
configuration report
 6.1
control board cover
 1.2
control panel
 1.2, 1.3
custom-sized materials, print
 4.9
D
Display 1.3
driver
feature
 2.1
installation
 3.3
E
envelopes, print 4.7
F
from the website 6.8
front cover
 1.2
H
handle 1.2
J
jam
tips for avoiding paper jams
 7.1
L
labels, print 4.8
LED
Status
 1.4
Linux
problems
 7.9
requirements
 2.2
M
Macintoshproblems
 7.10
requirements
 2.2
Maintenance
 6.1
maintenance parts
 6.8
toner...

Samsung Printer
Software section
Downloaded From ManualsPrinter.com Manuals 

1
SOFTWARE SECTION 
C
ONTENTS
Chapter 1: INSTALLING PRINTER SOFTWARE IN WINDOWS
Installing Printer Software  ........................................................................................................  4
Installing Software for Local Printing  .................................................................................  4
Installing Software for Network Printing .............................................................................  7
Reinstalling Printer Software...

2
Using Watermarks  .................................................................................................................  21
Using an Existing Watermark  .........................................................................................  21
Creating a Watermark  ...................................................................................................  21
Editing a Watermark  ........................................................................................................