Samsung CLX 6250FX User Manual

							CLX-6220 Series
CLX-6250 Series
Multi-Functional Printer
User’s Guide
imagine the possibilities
Thank you for purchasing a Samsung product. 
Downloaded From ManualsPrinter.com Manuals 
						

							Copyright_ 1
copyright
© 2009 Samsung Electronics Co., Ltd. All rights reserved.
This user’s guide is provided for information purposes only. All information included herein is subject to change without notice.
Samsung Electronics is not responsible for any direct or indirect damages, arising from or related to use of this user’s guide.
•Samsung and Samsung logo are trademarks of Samsung Electronics Co., Ltd.
•PCL and PCL 6 are trademarks of Hewlett-Packard Company.
•Microsoft, Windows, Windows Vista, Windows 7 and Windows 2008 Server R2 are either registered trademarks or trademarks of Microsoft Corporation.
•PostScript 3 is a trademark of Adobe System, Inc.
•UFST® and MicroType™ are registered trademarks of Monotype Imaging Inc.
•TrueType, LaserWriter and Macintosh are trademarks of Apple Computer, Inc.
•All other brand or product names are trademarks of their respective companies or organizations.
Refer to the LICENSE.txt file in the provided CD-ROM for the open source license information.
REV. 2.00
Downloaded From ManualsPrinter.com Manuals 
						

							Safety information_ 1
safety information
These warnings and precautions are included in order to prevent injury to you and others, as  well as preventing any 
potential damage to your mach ine. Be sure to read and unders tand all of these instructions before using the machine.
Use common sense for operatin g any electrical appliance and whenever using your machine. Also, follow all warnings and 
instructions marked on the machin e and in the accompanying li

terature. After reading this section, keep it in a safe place 
for future reference.
Important safety symbols
This section explains the meanings of all icons and signs in th e users guide. These safety symbols are in order, according to  the degree of 
danger.
Explanation of all icons and signs used in the user’s guide:
Warning Hazards or unsafe practices that may result in severe personal injury or death.
CautionHazards or unsafe practices that may result  in  minor personal injury or property damage.
Do not attempt.
Do not disassemble.
Do not touch.
Unplug the power cord from the wall socket.
Make sure the machine is grounded to prevent electric shock.
Call the service center for help.
Follow directions explicitly.
Operating environment
 Warning
Do not use if the power cord is damaged or if the 
electrical outlet is not grounded.
►  This could result in electric shock or fire. Do not bend, or place heavy objects on the power 
cord. 
►  Stepping on or allowing the power cord to be 
cru
 shed by a heavy object could result in electric 
shock or fire. 
Do not place anything on top of the machine (water, 
small metal or heavy objects, candles, lit cigarettes, 
etc.).
►  This could result in electric shock or fire. Do not remove the plug by pulling on the cord; do not 
handle the plug with wet hands. 
►  This could result in electric shock or fire. 
Downloaded From ManualsPrinter.com Manuals 
						

							Safety information_ 2
 Caution
During an electrical storm or for a period of 
non-operation, remove the power plug from the 
ele
ctrical outlet. 
►  This could result in electric shock or fire. 
If the plug does not easily ente r the electrical outlet, do not 
attempt to force it in. 
►  Call an electrician to change the electrical outlet, or this 
could result in electric shock.
Be careful, the paper output area is hot. 
►  Burns could occur. Do not allow pets to chew on the AC power, telephone or PC 
interface cords.
►  This could result in electric sho ck o
 r fire and/or injury to your 
pet. 
If the machine has been dropped, or if the cabinet appears 
damaged, unplug the machine from all interface connections 
and
 request assistance from qualified service personnel.
►  Otherwise, this could result  in electr
 ic shock or fire.
If the machine does not operate properly after these 
instructions have been followed, unplug the machine from all 
interface conn
ections and request assistance from qualified 
service personnel.
►  Otherwise, this could result in electric shock or fire.
If the machine exhibits a sudden and distinct change in 
performance, unplug the machine from all interface 
conn
ections and request assistance from qualified service 
personnel.
►  Otherwise, this could result  in ele
 ctric shock or fire.
Operating method
 Caution
Do not forcefully pull the paper out during printing. 
► It can cause damage to the machine.When printing large quantit ies, the bottom part of the 
paper output area may get hot. Do not allow children 
to touch. 
►  Children may be burned.
Be careful not to put your hand between the machine 
and paper tray.
►  You may get injured.When removing jammed paper, do not use tweezers 
or sharp metal objects. 
►  It can cause damage to the machine.
Do not block or push objects into the ventilation opening.
►  This could result in elevated  compo
 nent temperatures which 
can cause damage or fire.
Do not allow too many papers to  stack up in the paper output 
tray.
►  It could cause damage to the machine. 
Use care to avoid paper cuts when replacing paper or removing 
jammed paper. 
►  You may get hurt.This machines power interception device is the power cord. 
►  To switch off the power supply, remove the power cord from 
the el
 ectrical outlet. 
If the machine gets overh
eated, it 
 releases smoke, 
makes strange noises, or generates an odd odor, 
imme
 diately turn off the power switch and unplug the 
machine.
►  This could result in electric shock or fire. 
Downloaded From ManualsPrinter.com Manuals 
						

							Safety information_ 3
Installation / Moving
 Warning
Do not place the machine in an area with dust, 
humidity or water leaks. 
► This could result in electric shock or fire. 
 Caution
When moving the machine, turn the power off and 
disconnect all cords; then lift the machine with at 
l

east two people.
►  The machine could fall, causing human injury or 
m

achine damage.
Do not put a cover over the machine or place it in an airtight 
location, such as a closet.
►  If the machine is not well-ventilated, this could result in fire.
Do not place the machine on an unstable surface.
►  The machine could fall, causing human injury or machine 
d

amage.
Make sure you plug the power cord into a grounded electrical 
outlet.
►  Otherwise, this could result in electric shock or fire.
The machine should be connected to 
the power level which is specified on the label.
►  If you are unsure and want to check the power level you are 
u

sing, contact the elec trical utility company.
Do not overload wall outlets and extension cords.
► This can diminish performance, and could result in electric 
shock
  or fire.
Use only No.26 AWGa
a.  AWG: American Wire Gauge  or larger, telephone line cord, if 
necessary.
►  Otherwise, it can cause damage to the machine.
Use the power cord supplied with your machine for safe 
operation. If you are using a cord which is longer than 2 meters 
(79”) with a 140V machin

e, then the gauge should be 16 AWG 
or larger.
►  Otherwise, it can cause damage to the machine, and could 
result in electric shock or fir
 e.
Maintenance / Checking
 Caution
Unplug this product from the wall outlet before 
cleaning the inside of the machine. Do not clean the 
ma

chine with benzene, paint thinner or alcohol; do 
not spray water directly  into the machine. 
►  This could result in electric shock or fire. 
Keep cleaning supplies away from children. 
►  Children may get hurt.
When you are working inside the machine replacing 
supplies or cleaning the in si
 de, do not operate the 
machine.
►  You may get injured.
Do not disassemble, repair or rebuild the machine by 
yourself. 
►  It can cause damage to the machine. Call a 
ce

rtified technician when the machine needs repair.
Downloaded From ManualsPrinter.com Manuals 
						

							Safety information_ 4
Supply usage
 Caution
Do not disassemble the toner cartridge.
► Toner dust can be dangerous to humans.When storing supplies such as toner cartridges, keep 
them away from children.
►  Toner dust can be dangerous to humans.
Do not burn any of the supplies such as toner 
cartridge or fuser unit.
►  It can cause an explosion or fire.Using recycled supplies, such as toner, can cause damage to 
the machine.
►  In case of damage due to the use of recycled supplies, a 
service
  fee will be charged.
When changing the toner cartridge or removing jammed paper, 
be careful not to let toner dust touch your body or clothes.
►  Toner dust can be dangerous to humans.
Keep the power cable and the contact surface of the plug clean 
from dust or water.
►  This could result in electric shock or fire. 
To clean and operate the machine,  strictly follow the users 
guide provided with the machine.
►  Otherwise, it can cause damage to the machine.
Do not remove any covers or guards that are fastened with 
screws. 
►  The machine should only be repaired by Samsung service 
technician.
Downloaded From ManualsPrinter.com Manuals 
						

							Regulatory information_ 1
regulatory information
This machine is certified with  several regulatory statements.
Laser Safety Statement
The printer is certified in the U.S. to c onform to the requirements of DHHS 21 CFR, chapter 1 Subchapter J for Class I(1) laser  products, and 
elsewhere is certified as a Class I laser product conforming  to the requirements of IEC 60825-1:1993 + A1:1997 + A2:2001.
Class I laser products are not considered  to be 
 hazardous. The laser system and printer are designed  so there is never any human access to 
laser radiation above a Class I level during normal operati on, user maintenance or prescribed service condition.
• Wav
elenght : 800 nm
• Beam d
 ivergence
- Paraller : 11 deg
 rees
- Perp
endicular : 35 degrees
• Ma
ximum power or energy output : 12 mW
WARNING 
Never operate or service the printer with t he protective cover removed from Laser/Sca nner assembly. The reflected beam, although invisible, 
can damage your eyes.
When using this product, these basic safety precautions should al ways 
 be followed to reduce risk of fire, electric shock, and injury to persons:
Taiwan only
Downloaded From ManualsPrinter.com Manuals 
						

							Regulatory information_ 2
Ozone Safety
During normal operation, this machine produces ozone. The ozone  produced does not present a hazard to the operator. However, it is 
advisable that the machine be operated in a well ventilated area.
If you need additional information about ozone, request your nearest Samsung dealer.
Mercury Safety
Contains Mercury, Dispose According to Lo cal, State or Federal Laws. (U.S.A. only)
Power Saver
This printer contains advanced energy conservation technology th at reduces power consumption when it is not in active use.
When the printer does not receive data for an extended perio d of 
 time, power consumption is automatically lowered. 
ENERGY STAR and the ENERGY STAR  ma
 rk are registered U.S. marks. 
For more information on the ENERGY STAR  progra
 m see http://www.energystar.gov.
Recycling
Recycle or dispose of the packaging material for this product in an environmentally responsible manner.
China only
Downloaded From ManualsPrinter.com Manuals 
						

							Regulatory information_ 3
Correct Disposal of This Product (Waste  Electrical & Electronic Equipment)
(Applicable in the European Union and other European countries with separate collection systems)
This marking on the product, accessories or  literature indicates that the product and its electronic accessories (e.g. charger,  headset, USB 
cable) should not be disposed of  with other household waste at the end of their working life. To prevent possible harm to the e nvironment or 
human health from uncontrolled waste disposal, please separate  these items from other types of waste and recycle them responsib ly to 
promote the sustainable reuse  of material resources. 
Household users should contact either the re ta
 iler where they purchased this product, or their local government office, for details of where and 
how they can take these items for environmentally safe recycling.
Business users should contact their supplier and check the terms and 
 conditions of the purchase contract. This product and its electronic 
accessories should not be mixed with other commercial wastes for disposal.
Correct disposal of batteries in this product
(Applicable in the European Union and other European countries with separate battery return systems.)
This marking on the battery, manual or packaging indicates that  the batteries in this product should not be disposed of with ot her household 
waste at the end of their workin g life. Where marked, the chemical symbols Hg, Cd  or Pb indicate that the battery contains mercury, cadmium 
or lead above the reference levels in EC Directive 2006/66. If  batteries are not properly disposed of, these substances can cau se harm to 
human health or the environment. 
To protect natural resources and to promote material reuse, please separate batteries from other types of waste and recycle the m th
 rough your 
local, free batt ery return system.
Radio Frequency Emissions
FCC Information to the User
This device complies with Part 15 of  the FCC Rules. Operation is subject to the following two conditions: 
• Thi
s device may not cause harmful interference, and
•This 
device must accept  any interference received, including inte rference that may cause undesired operation.
This equipment has been tested and found to comply with the limit s fo
 r a Class A digital device, pursuant to Part 15 of the FCC Rules. These 
limits are designed to provide reasonable protection against harmf ul interference in a residential installation. This equipment generates, uses 
and can radiate radio frequency energy and, if  not installed and used in accordance with the instructions, may cause harmful interference to 
radio communications. However, there is no  guarantee that interference will not occur in a particular installation. If this equ ipment does cause 
harmful interference to radio or television reception, which can  be determined by turning the equipment off and on, the user is encouraged to 
try to correct the interference by one or more of the following measures:
• Reorie
nt or relocate the receiving antenna.
•Incre
ase the separation between the equipment and receiver.
•Conn
ect the equipment into an outlet on a circuit diff erent from that to which the receiver is connected.
• Consul
t the dealer or experienced radio TV technician for help.
 Change or modifications not expressly approv ed by the manufacturer responsible for compliance could void the users authority to 
operate the equipment.
Canadian Radio Interference Regulations
This digital apparatus does not exceed the Class A limits for radi o noise emissions from digital apparatus as set out in the interference-causing 
equipment standard entitled “Digital Apparatus” , ICES-003 of the Industry and Science Canada.
Cet appareil numérique respecte les limites de bruits radioélectri
 ques applicables aux appareils numériques de Classe A prescrites dans la 
norme sur le matériel brouilleur: “Appareils Numériques”, ICES-003 édictée  par l’Industrie et Sciences Canada.
Downloaded From ManualsPrinter.com Manuals 
						

							Regulatory information_ 4
UNITED STATES OF AMERICA
Federal Communications Commission (FCC)
Intentional emitter per FCC Part 15
Low power, Radio LAN type devices (radio frequency (RF) wireless co mmunication devices), operating in the 2.4 GHz/5 GHz Band, may be 
present (embedded) in your printer system. Th is section is only applicable if these devices are present. Refer to the system la bel to verify the 
presence of wireless devices.
Wireless devices that may be in your system are only qualified for  use in the United
  States of America if an FCC ID number is o n the system 
label.
The FCC has set a general guideline of 20 cm (8 inches) separa ti
 on between the device and the body, for use of a wireless device near the 
body (this does not include extremities). This device should be  used more than 20 cm (8 inches) from the body when wireless dev ices are on. 
The power output of the wireless device (or de vices), which may be embedded in your printer, is well below the RF exposure limits as set by 
the FCC.
This transmitter must not be collocated or operatio n
  in conjunction with any other antenna or transmitter.
Operation of this device is subject to the following two condit i
 ons: (1) This device may not cause harmful interference, and (2 ) this device must 
accept any interference received, including interference  that may cause undesired operation of the device.
 
Wireless devices are not user serviceable. Do not modify them  in any way. Modification to a wireless device will void the autho rization to 
use it. Contact manufacturer for service.
FCC Statement for Wireless LAN use:
 
While installing and operating this transmitter and antenna combin ation the radio frequency exposure limit of 1m W/cm2 may be 
exceeded at distances close to the antenna installed. Therefore,  the user must maintain a minimum distance of 20cm from the ant enna at 
all times. This device cannot be colocated wi th another transmitter and transmitting antenna.
Taiwan only
Turkey only
Downloaded From ManualsPrinter.com Manuals